• Steel and Composite Structures
• /
• 제35권4호
• /
• pp.599-609
• /
• 2020

The tension-only braced frames (TOBFs) are widely used as a lateral force resisting system (LFRS) in low-rise steel buildings due to their simplicity and economic advantage. However, the system has poor seismic energy dissipation capacity and pinched hysteresis behavior caused by early buckling of slender bracing members. The main concern in utilizing the TOBF system is the determination of appropriate performance factors for seismic design. A formalized approach to quantify the seismic performance factor (SPF) based on determining an acceptable margin of safety against collapse is introduced by FEMA P695. The methodology is applied in this paper to assess the SPFs of the TOBF systems. For this purpose, a trial value of the R factor was first employed to design and model a set of TOBF archetype structures. Afterwards, the level of safety against collapse provided by the assumed R factor was investigated by using the non-linear analysis procedure of FEMA P695 comprising incremental dynamic analysis (IDA) under a set of prescribed ground motions. It was found that the R factor of 3.0 is appropriate for safe design of TOBFs. Also, the system overstrength factor (Ω₀) was estimated as 2.0 by performing non-linear static analyses.

• 한국전산구조공학회논문집
• /
• 제25권3호
• /
• pp.259-266
• /
• 2012

본 논문에서는 벽식 구조시스템의 일부 전단벽을 제거하여 공간의 가변성을 높인 무량복합 구조시스템의 내진성능을 ATC-63에 제시되어 있는 절차에 따라 파악하였으며, 동일한 규모의 벽식 구조시스템의 내진성능과 비교하였다. 해석모델로 12층 무량복합 및 벽식 구조시스템을 KBC 2009에 따라 설계하고 비선형 정적 및 비선형 증분 동적해석(IDA)을 수행하여 지진응답 및 붕괴거동을 파악하였다. 무량복합 시스템은 벽식 구조시스템 보다 적은 양의 콘크리트 물량으로 설계되었으며, 동일한 지진하중에 대하여 좀 더 큰 변위응답을 보이는 것으로 나타났다. IDA 해석결과 얻어진 붕괴 여유비(CMR)는 ATC-63에 제시된 한계상태를 만족하여 설계지진하중에 대하여 충분한 내진성능을 보유한 것으로 나타났다.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.29-35
• /
• 2008

본 논문에서는 부하전류의 급격한 변화에도 안정적인 출력진압을 얻기 위하여 강압쵸퍼의 전압제어 기를 개선하는 방법으로 부하전류 전향보상기를 제시하였다. 제시된 부하전류 전향보상기의 특성을 확인하기 위해 메이슨(Mason)의 이득공식을 이용하여 기존의 전압제어기가 포함된 전체 시스템의 전달함수와 부하전류 전향보상기가 추가된 전체 시스템의 전달함수를 각각 근궤적선도와 보드선도 상에서 비교하였다. 그 결과 시스템의 극점이 개선되고, 공진주파수에서의 첨두값의 크기 및 절점주파수의 위상여유가 양호한 것을 확인하였다. 따라서, 제시된 제어기법이 강압쵸퍼의 정상상태 및 동특성을 향상시키고 출력에 나타나는 외란에 의한 영향을 감소시킨 것을 확인할 수 있었다.

• 수산해양기술연구
• /
• 제46권2호
• /
• pp.165-172
• /
• 2010

This study was performed to estimate the swimming velocity of Pacific saury (Cololabis saira) migrated offshore Funka Bay of Hokkaido using an acoustic Doppler current profiler (OceanSurveyor, RDI, 153.6kHz) established in T/S Ushio-maru of Hokkaido University, in September 27, 2003. The ADCP's doppler shift revealed as the raw data that the maximum swimming velocity was measured 163.0cm/s, and its horizontal swimming speed and direction were $72.4{\pm}24.1\;cm/s$, $160.1^{\circ}{\pm}22.3^{\circ}$ while the surrounding current speed and direction were $19.6{\pm}8.4\;cm/s$, $328.1^{\circ}{\pm}45.3^{\circ}$. To calculate the actual swimming speed of Pacific saury in each bins, comparisons for each stratified bins must be made between the mean surrounding current velocity vectors, measured for each stratified bin, and its mean swimming velocity vectors, assumed by reference (threshold > -70dB) and 5dB margin among four beams of ADCP. As a result, the actual averaged swimming velocity was 88.6cm/s and the averaged 3-D swimming velocity was 91.3cm/s using the 3-D velocity vector, respectively.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.256-262
• /
• 2019

Extensive tumor resection accompanied by radiotherapy and chemotherapy is the standard of care for malignant gliomas. However, there is a significant obstacle to the complete resection of the tumor due to the difficulty of distinguishing tumor and normal brain tissue with a conventional surgical microscope. Recently, multiple studies have shown the possibility of fluorescence-guided surgery in malignant gliomas. The most used fluorescence dyes for brain tumor surgery are 5-aminolevulinic acid (5-ALA) and indocyanine green (ICG). In this paper, a new fluorescence guided operation system, which can detect both 5-ALA and ICG fluorescent images simultaneously, is presented. This operation system consists of light emitting diodes (LEDs) which emits 410 nm and 740 nm wavelengths. We have performed experiments on rats in order to verify the operation of the newly developed operation system. Oral administration and imaging were performed to observe the fluorescence of 5-ALA and ICG fluorescence in rats. When LEDs at wavelengths of 410 nm and 740 nm were irradiated on rats, 628 nm wavelength with a violet fluorescence color and 825 nm wavelength with a red fluorescence color were expressed in 5-ALA and ICG fluorescent material, respectively, thus we were able to distinguish the tumor tissues easily. Previously, due to the poor resolution of the conventional surgical microscope and the fact that the color of the vein is similar to that of the tumor, the tumor resection margin was not easy to observe, thus increasing the likelihood for cancer recurrence. However, when the tumor is observed through the fluorescence guided operation system, it is possible to easily distinguish the color with the naked eye and it can be completely removed. Therefore, it is expected that surgical removal of cancerous tumors will be possible and surgical applications and surgical microscopes for cancer tumor removal surgery will be promising in the future.

• 한국정보통신학회논문지
• /
• 제25권11호
• /
• pp.1574-1580
• /
• 2021

본 논문에서는 현재 기술 개발 과제로 진행 중인 공중 네트워크 검증용 테스트베드 시스템에 다중빔 능동위상배열 안테나 모의기 적용 공중 네트워크 모사 Radio 전송링크를 설계하여 그 결과를 제시한다. Ku 대역을 활용하여 개발 중인 시스템에 대한 요구사항을 만족하도록 링크 버짓을 고려하여 Radio 전송링크를 설계하였다. 단거리 링크와 장거리 링크를 고려하여 요구되는 다중빔 중계기와 임무기의 EIRP 및 G/T 성능 규모를 적용하여 Eb/No를 기준으로 최소, 최대치 링크 마진을 확인하였다. 이러한 Radio 전송링크 설계에서 강우 가용도 등 적용 분석 결과를 이용하여 다중빔 중계시스템 적용 공중 중계 운용 반경 및 관련 시스템 규격 선정시 기준 수립에 효과적으로 활용될 수 있도록 기여하고자 한다.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1563-1570
• /
• 2023

In this study, a DeCART/MIG uncertainty quantification (UQ) analysis code system with a multicorrelated cross section stochastic sampling (S.S.) module was established and verified through the UAM (Uncertainty Analysis in Modeling) and the BEAVRS (Benchmark for Evaluation And Validation of Reactor Simulations) benchmark calculations. For the S.S. calculations, a sample of 500 DeCART multigroup cross section sets for two major actinides, i.e., ²³⁵U and ²³⁸U, were generated by the MIG code and covariance data from the ENDF/B-VII.1 evaluated nuclear data library. In the three pin problems (i.e. TMI-1, PB2, and Koz-6) from the UAM benchmark, the uncertainties in k_inf by the DeCART/MIG S.S. calculations agreed very well with the sensitivity and uncertainty (S/U) perturbation results by DeCART/MUSAD and the S/U direct subtraction (S/U-DS) results by the DeCART/MIG. From these results, it was concluded that the multi-group cross section sampling module of the MIG code works correctly and accurately. In the BEAVRS whole benchmark problems, the uncertainties in the control rod bank worth, isothermal temperature coefficient, power distribution, and critical boron concentration due to cross section uncertainties were calculated by the DeCART/MIG code system. Overall, the uncertainties in these design parameters were less than the general design review criteria of a typical pressurized water reactor start-up case. This newly-developed DeCART/MIG UQ analysis code system by the S.S. method can be widely utilized as uncertainty analysis and margin estimation tools for developing and designing new advanced nuclear reactors.

• 한국산림과학회지
• /
• 제79권2호
• /
• pp.187-195
• /
• 1990

천원군지역(天原郡地域))의 특산물(特産物)인 호도를 대상(對象)으로 유통과정(流通過程)에서 발생(發生)하는 각종(各種) 유통구조(流通構造) 및 가격형성과정(價格形成過程)을 분석(分析)해 본 결과(結果)는 다음과 같다. 1. 산지(産地)에서의 판매방법(販賣方法)은 개별판매(個別販賣)가 89.58%, 산임조합(山林組合) 등(等)을 통(通)한 계통출하(系統出荷)가 10.42%이며, 개별출하(個別出荷)의 농가수취율(農家收取率)은 54.93%, 계통출하(系統出荷)의 농가수취율(農家收取率)은 84.58%로 계통출하(系統出荷)로의 유도(誘導)가 필요(必要)하다. 2. 수집(蒐集) 위탁상(委託商)의 상위(上位) 3계소(系所) 집중솔지수(集中率指數)(CR3)는 0.8626으로 과점형태(寡占形態)의 시장구조(市場構造)를 나타내고 있어, 공동판매(共同販賣) 등(等)을 통(通)하여 시장교섭력(市場交涉力)을 증대(增大)시킬기구(機構)가 필요(必要)하다. 3. 호도의 주유통경로(主流通經路)는 농가(農家)-수집(蒐集) 위탁상(委託商)-도매상(都賣商)-소매상(小賣商)-소비자(消費者)로 전체생산량(全體生産量)의 49.63%가 이 경로(經路)로 판매(販賣)되었다. 따라서 생산자(生産者)와 소비자(消費者)를 위(爲)한 유통구조(流通構造)로의 개선(改善)이 필요(必要)하다. 4. 수집(蒐集) 위탁상(委託商)을 판매처(販賣處)로 선택(選擇)한 동기중(動機中) 편리(便利)함이 45.00%로 가장 많고, 다음이 생산량(生産量)이 적어서 20.00%로 나타난 것으로 보아 산림조합(山林組合), 농협(農協) 등(等)에 의(依)한 수매절차(收買節次)의 간소화(簡素化), 수매시기(收買時期), 수매물량기준(收買物量基準) 등(等)을 완화(緩和)시킬 필요(必要)가 있다. 5. 농가수취율(農家收取率)과 유통(流通)마진은 각각(各各) 54.93%, 45.07%로 농가수취율(農家收取率)은 다른 상품(商品)에 비(比)해 다소(多少) 높은편이나 유통(流通)마진 45.07% 중(中) 36.70%가 소매단계(小賣段階)에 집중(集中)되어 있고, 상품(商品)의 표준화(標準化), 규격화(規格化)가 요구(要求)된다. 6. 생산농가(生産農家)의 궁핍판매(窮乏販賣) 및 홍수출하(洪水出荷)로 계절지수(季節指數)는 4월(月)이 115.74로 가장 높으며, 11월(月)이 83.63으로 가장 낮아 계통조직(系統組織) 등(等)을 통(通)한 선대구매(先貸購買), 저장(貯藏) 등(等)을 통(通)한 가격안정대책(價格安定對策)이 필요(必要)하다.

• 유통과학연구
• /
• 제13권11호
• /
• pp.123-130
• /
• 2015

Purpose - Due to highly elevated levels of competition, many companies today have to face the problem of decreasing profits even when their actual sales volume is increasing. This is a common phenomenon that is seen occurring among companies that focus heavily on quantitative growth rather than qualitative growth. These two aspects of growth should be well balanced for a company to create a sustainable business model. For supply chain management (SCM) planners, the optimized, quantified flow of resources used to be of major interest for decades. However, this trend is rapidly changing so that managers can put the appropriate balance between sales volume and sales quality, which can be evaluated from the profit margin. Profit optimization is a methodology for companies to use to achieve solutions focused more on profitability than sales volume. In this study, we attempt to provide executional insight for companies considering implementation of the profit optimization system to enhance their business profitability. Research design, data, and methodology - In this study, we present a comprehensive explanation of the subject of profit optimization, including the fundamental concepts, the most common profit optimization logic algorithm -linear programming -the business functional scope of the profit optimization system, major key success factors for implementing the profit optimization system at a business organization, and weekly level detailed business processes to actively manage effective system performance in achieving the goals of the system. Additionally, for the purpose of providing more realistic and practical information, we carefully investigate a profit optimization system implementation case study project fulfilled for company S. The project duration was about eight months, with four full-time system development consultants deployed for the period. To guarantee the project's success, the organization adopted a proven system implementation methodology, supply chain management (SCM) six-sigma. SCM six-sigma was originally developed by a group of talented consultants within Samsung SDS through focused efforts and investment in synthesizing SCM and six-sigma to improve and innovate their SCM operations across the entire Samsung Organization. Results - Profit optimization can enable a company to create sales and production plans focused on more profitable products and customers, resulting in sustainable growth. In this study, we explain the concept of profit optimization and prerequisites for successful implementation of the system. Furthermore, the efficient way of system security administration, one of the hottest topics today, is also addressed. Conclusion - This case study can benefit numerous companies that are eagerly searching for ways to break-through current profitability levels. We cannot guarantee that the decision to deploy the profit optimization system will bring success, but we can guarantee that with the help of our study, companies trying to implement profit optimization systems can minimize various possible risks across various system implementation phases. The actual system implementation case of the profit optimization project at company S introduced here can provide valuable lessons for both business organizations and research communities.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.15-23
• /
• 2009

압축력에 강한 석조 홍예아치교의 경우 재료적 음력한계보다는 구조적 형상의 불안정성에 의해서 구조물이 붕괴된다. 이러한 특성을 고려하면, 석조 홍예아치교의 구조적 안정성 평가에는 구조물의 붕괴기구 형상에 초점을 둔 한계상태 해석이 보다 적합하다. 이 연구에서는 한계상태 해석법을 이용하여 건식법(dry construction)으로 축조된 우리나라 석조 홍예아치교의 구조적 거동을 살펴보고, 이 결과를 구조적 안정성 평가시스템 개발에 이용하고자 한다. 이 연구결과는 우리나라 석조 홍예아치교의 구조적 거동을 이해하는데 도움이 되며, 향후 문화재 유지관리 측면에서 공학적 판단기준을 주리라 기대한다.