• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.260-265
• /
• 2010

Purpose: To report the clinical results of two cases of coronoid process fractures that were treated with volar plating through a medial approach. Materials and Methods: Two fractures of the coronoid process that needed to be fixed were managed with open reduction and internal fixation through a medial approach using 2.4 mm locking compression plates (Compact Hand set$^{(R)}$, Synthes, Switzerland). The patients were followed up for 14 months and 17 months and were evaluated using the Mayo Elbow Performance Score (MEPS). Results: The MEPS was 95 for Case 1 and 100 for Case 2. Active elbow joint motions were $5^{\circ}-120^{\circ}$ (Case 1) and $0^{\circ}-130^{\circ}$ (Case 2). Supination and pronation fully recovered. Conclusion: Satisfactory results can be obtained in cases of coronoid process fractures because volar plating through a medial approach allows sound fixation and early mobilization of the elbow joint.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.2
• /
• pp.68-73
• /
• 2016

Ammonia is very toxic, and causes neuronal damage via excitotoxicity, oxidative stress, and inflammation. Because the liver is the primary organ for ammonia metabolism, compromised liver function can result from inborn errors of metabolism. Measurement of blood ammonia has some limitations. Recently, several laboratories examined possible concurrent increases in plasma ammonia. However, the collection, handling, storage, and analysis of blood samples are all potential sources of error. For evaluation of rapidity and reliability of measurement of blood ammonia, the DRI-CHEM 100 (Fuji Film Co., Japan) and COBAS 8000 (Roche Diagnostic Ltd., Switzerland) analyzer were used for analysis of ammonia level values. The results of this study detected a high correlation between analyzer. Therefore, one-step measurement was suitable for ammonia analysis. After sampling of the ammonia in the time slot for measurement an increase to 46.5, 57.4, and 79.0 (${\mu}g/dL$) was observed at 30, 90, and 180 minutes. In addition, specific capacity of the ammonia, 7, 10, and 13 (${\mu}L$), was measured as 39, 46, and 43 (${\mu}g/dL$), respectively, and the FDC-100 analyzer was more effective in $10{\mu}L$ (p<0.001). In conclusion, the evaluated analysis may offer useful information for clinical application.

• Journal of vocational education research
• /
• v.37 no.2
• /
• pp.19-37
• /
• 2018

This study aims to analyze the changes in school/corporate authorities participation after overseas training in Germany and Switzerland. According to this study, the satisfaction with program contents and help for the operation of apprenticeship education was very high. Even though the satisfaction with each type of apprenticeship education institutes did not show differences in accordance with participants' age, there were statistically significant differences in the satisfaction in accordance with work area and position, so that it would be necessary to reflect the results of analysis on the selection of institutes to visit in the future. Regarding the changes in the perception of operation of apprenticeship school in accordance with school/corporate authorities' participation in overseas training, school authorities' perception of the whole areas was improved after training than before training like understanding, planning, practice, and evaluation of apprenticeship education while corporate authorities' perception was not. As corporate authorities also understood the necessity of overseas training for the operation of apprenticeship education, however, in order to increase the effects of overseas training in the future, it would be necessary to provide lots of information to help the understanding of apprenticeship education through preliminary training or regular council and council of each project group. Because of the huge differences in socio-cultural conditions in the practice of apprenticeship education between Korea and two countries such as Germany and Switzerland, it would be needed to operate overseas training that could draw the improvement measures within the system of Korea instead of simple comparative analysis.

• Tunnel and Underground Space
• /
• v.29 no.3
• /
• pp.197-213
• /
• 2019

We simulated the fault reactivation experiment conducted at 'Main Fault' intersecting the low permeability clay formations of Mont Terri Underground Research Laboratory in Switzerland using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. We formulate the hydro-mechanical coupling relation of hydraulic aperture to consider the elastic fracture opening and failure-induced dilation for reproducing the abrupt changes in injection flow rate and monitoring pressure at fracture opening pressure. A parametric study was conducted to examine the effects of in-situ stress condition and fault deformation and strength parameters and to find the optimal parameter set to reproduce the field observations. In the best matching simulation, the fracture opening pressure and variations of injection flow rate and monitoring pressure showed good agreement with field experiment results, which suggests the capability of the numerical model to reasonably capture the fracture opening and propagation process. The model overestimated the fault displacement in shear direction and the range of reactivated zone, which was attributed to the progressive shear failures along the fault at high injection pressure. In the field experiment results, however, fracture tensile opening seems the dominant mechanism affecting the hydraulic aperture increase.

• Journal of The Korean Association For Science Education
• /
• v.39 no.2
• /
• pp.233-248
• /
• 2019

This study shows that the Argovian Cantonal School in Aarau, Switzerland, which Albert Einstein attended from 1895 to 1896, had been closely related to the ideological education controversy in German Gymnasium throughout the 19th century. Due to this controversy, Einstein hardly received a formal science education in Bavaria. Despite the lack of formal education in Germany, he had a habit of self-studying from an early age and continued with this practice all through his life. He had a hard time at the authoritarian school in Munich, but at the democratic school in Aarau, where freedom and autonomy were secured, he was able to achieve emotional stability. For a long time, the city Aarau prevailed as a location of tolerance and multi-culturalism, without religious, regional, and national discrimination. This was possible due to the influence of external and unrestricted social mobility, as well as the Enlightenment from France. As a result, this small public school was able to acquire a mass of qualified human resources from outside of Switzerland. As a consequence of the controversy regarding the educational ideology, the Cantonal School adopted practical thoughts and the Enlightenment that fit the spirit of the times. The school consisted of two independent educational organizations: the Gymnasium, where the 'neuhumanistsch' education for the elite training was conducted, and the 'Gewerbeschule', where a more realistic education system was set up to suit the citizen life. In particular, after 1835, the Gymnasium changed gradually from the pure humanistic education to the 'utraquistisch' ways by introducing practical subjects such as natural history. Thereafter, the Cantonal School became an institution that was able to achieve a genuine humanity, academic, and civic life education. Einstein, who attended the 'technische Abteilung' of the 'Gewerbeschule,' considered this school as a role model of an institution that realized true democracy, and that left an unforgettable impression on him.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.4
• /
• pp.335-341
• /
• 2020

This study investigates the association of the AFB stain with the cycle threshold (Ct) value of the Cobas TaqMan MTB test (CTM test, Roche Diagnostics, Basel, Switzerland), and it establishes the base data for semi-quantitative identification of M. tuberculosis by the Ct value. CTM test were simultaneously conducted on 8,389 specimens submitted to the Samsung Medical Center from January 2015 to December 2015, and the results were analyzed and compared retrospectively investigates the association of the AFB stain with the Ct value of the CTM test, and it establishes the base data for semi-quantitative identification of M. tuberculosis by the Ct value. The Ct values for 135 positive specimens of the CTM were inversely correlated with the AFB stain (rs=-0.545, P<0.01). When the Ct value of the CTM test and the time to positivity (TTP) of the mycobacteria cultures were verified based on the AFB stain, they were found to have a positive correlation (rs=0.136, P<0.01). The negative correlation between the CTM test and the AFB stain grade was demonstrated. The clinical significance was verified by applying these criteria to the clinical results. The semi-quantitative criteria of this study can be used to facilitate the rapid isolation of patients with active tuberculosis and infection control in the hospital.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.2
• /
• pp.91-99
• /
• 2023

Background: Extrusion of debris is a major factor that results in postoperative pain during root canal treatment with various instruments and instrumentation techniques. Therefore, instrumentation techniques that extrude minimal debris into the periapical area while reducing pain are desirable. This study aimed to compare the incidence of postoperative pain and intake of analgesic medication (frequency and quantity) after endodontic treatment of mandibular posterior teeth using two single files and full-sequence continuous rotary systems with different kinematic motions. Methods: Thirty-five of 105 patients were assigned equally to three groups according to the instrumentation system used: ProTaper Next (PN) X2, 25/06 (Dentsply, Maillefer, Ballaigues, Switzerland), One Shape (OS), #0.25/06 (Micro Mega, Besancon, France), and Wave One Gold (WG), Red - #0.25, 0.07 (Dentsply, Maillefer, Ballaigues, Switzerland). Five specialists were included in this study design; each professional prepared 21 teeth, and randomly selected 7 per instrument system. The VAS sheet ranging from 0 to 10 was used to record the initial and postoperative pains at 24, 48, and 72 h, and 7^th day after single visit endodontic treatment in mandibular premolars and molars with a diagnosis of asymptomatic irreversible pulpitis with or without apical periodontitis. Postoperatively, an analgesic, ibuprofen 400 mg was administered for intolerable pain at a dose of 1 tablet for 6 h. The patients were asked over the telephone regarding postoperative pain at intervals of 24, 48, and 72 h, and 7^th day using a visual analogue scale. Result: There were no statistically significant differences among the PN, OS, and WG systems (P > 0.05) with regard to the incidence of postoperative pain at any of the four time points assessed. Conclusion: The intensity of postoperative pain, frequency, and analgesic intake were similar across all three types of instrument systems; however, the reciprocating single file (WG) was associated with less postoperative pain than the full sequence continuous rotary file.

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.335-353
• /
• 2023

Site selection processes for high-level radioactive waste disposal facilities in different countries differ in terms of local geology and degree of public engagement. There seem to be three alternative processes for site selection: (1) selection with community consent after government choice; (2) selection with continuous community engagement after exclusion of unsuitable areas based on existing survey data; or (3) site selection where communities have expressed a willingness to participate. The Yucca Mountain site in Nevada, USA, was selected as the final disposal site by process (1) through six stages, but its development was suspended owing to opposition from the local governor and environmental groups. In Sweden, Switzerland, and Germany, process (2) is used and sites are selected through three stages. Sweden and Switzerland have completed site selection, and Germany is currently engaged in the process. The UK adopted process (3) with six stages, although the process has been suspended owing to poor community participation. In Korea, temporary storage facilities for spent nuclear fuel will reach saturation from 2030, so site selection must be promoted through various laws and systems, with continuous communication with local communities based on transparent and scientifically undertaken procedures.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.2
• /
• pp.191-195
• /
• 2016

Purpose: The purpose of this study was to analyze the immediate effects of ankle restriction with an elastic band on ground reaction force during a golf swing. Method: There were five subjects who were teaching pros with an average golf score of 75. A force platform (9281B, Switzerland) was used. The independent variable was the presence of an elastic band. The dependent variables were three-dimensional ground reaction forces to analyze the transfer of momentum with the timing, control and coordination of the three forces. A paired t-test within subject repeated measure design was used via an SPSS 20.0. Results: Wearing an elastic band around one's ankles significantly makes shorter time differences between the moment of cross anterior / posterior forces and vertical force and median value of anterior / posterior forces during the backswing, between medial and lateral maximum and anterior / posterior force from the top of the back swing to the mid down swing, and creates an anterior / posterior maximum force. Conclusion: Wearing an elastic band around one's ankles affects control and coordination between three dimensional forces, and anterior force power according to each phase of the golf swing.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.3
• /
• pp.113-119
• /
• 2017

Objective: The objective of this study was to investigate the effects of Schroth's three-dimensional exercises in combination with respiratory muscle exercise (SERME) on Cobb's angle and functional movement screen (FMS). Design: Randomized controlled trial. Methods: Fifteen subjects with scoliosis were randomly assigned to two groups. Eight subjects were assigned to the experimental group and seven subjects were assigned to the control group. The experimental group underwent SERME using SpiroTiger (Idiag, Switzerland), while the control group performed only the Schroth's three-dimensional exercises (SE). Both groups performed exercises for one hour per day, three times a week for eight weeks. Cobb's angle, pulmonary function (forced vital capacity, forced expiratory volume at one second, and peak expiratory flow) and FMS were measured before and after the experiment. Results: After intervention, the SERME group showed a significant difference in Cobb's angle, FMS scores, and pulmonary function as compared to before intervention (p<0.05). In the SE group, there was a statistically significant difference in Cobb's angle, pulmonary function, and FMS scores compared to before intervention (p<0.05). The SERME group showed a significant difference in Cobb's angle and peak expiratory flow in pulmonary function compared to the SE group (p<0.05). Conclusions: The results suggest that SERME could be a more effective intervention for improvement of the Cobb's angle and pulmonary function for scoliosis patients.