• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.376-381
• /
• 2004

A rig was constructed to test the performance characteristics and compare the hydraulic forces exerted on a centrifugal type artificial heart impeller. A conventional shaft. seal and bearing system. while driven by a small electric motor. supported the impeller which was separated from the pump casing by a six degree of freedom force transducer (JR3 Ine). Radial (x. y) and axial (z) hydraulic forces were recorded and compared. At physiological operating conditions. the results indicate that the double entry/exit centrifugal pump encounters a smaller radial force and significantly reduced axial thrust. These experimental results are valuable in the design of a magnetic bearing system to suspend the impeller of a centrifugal artificial heart pump. This experimental technique may also be applied to evaluate the required capacity and predict the lifetime of contact bearings in marine pumps.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 춘계 종합학술대회 논문집
• /
• pp.497-502
• /
• 2004

무선 PKI에서 즉시 인증서의 검증이 가능하도록 하는 OCSP기법은 인증서 폐지 효력 정지 상태 파악을 실시간으로 정확하게 할 수 있다는 특성이 있다. 그러나 많은 클라이언트들이 OCSP서버에 인증에 대한 서비스를 요청할 경우 OCSP서버의 부하는 증가하게 되고, 많은 갱신정보들이 집중화될 때도 OCSP서버는 많은 부하를 갖게 된다. 이에 분산 OCSP서버 기법을 무선 PKI에 적용함으로서 빠른 인증서 검증과 OCSP서버로의 트래픽 집중을 막고, 중앙집중적인 구조의 많은 제약들을 분산된 OCSP 서버로 해결하고자 한다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.177-182
• /
• 2005

Many studies have been conducted to increase heat transfer in fluid. One of the various heat transfer enhancement techniques is to suspend fine metallic or nonmetallic solid powder in traditional fluid. Nanofluid is defined at a new kind of heat transfer fluid containing a very small quantity of nanometer particles that are uniformly and stably suspended in a liquid. In this study CuNi or CuAg nano particles are used to investigate heat transfer enhancement. The result shows the thermal conductivity of nanofluid is much higher than that of traditional fluid.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (B)
• /
• pp.16-18
• /
• 2001

Despite extensive research on R-trees, most of the proposed schemes have not been integrated into existing DBMS due to the lack of protocol to provide consistency in concurrent environment. R-link tree is an acceptable data structure to deal with this issue., but still not enough. In this paper, we focus on a simplified predicate locking mechanism based on R-link tree for concurrency control and phantom protection. An in-memory operation control list (OCList) used to suspend some conflicting operations is designed here. The main features of this approach are (1) it can be implemented easily and do not need any extra information. (2) Only-one-lock is held when descending R-tree even when node split happens, while lock-coupling scheme is performed when ascending. No deadlocks are possible. (3) Searches and insertions are not unnecessarily restricted. (4) Insert and Delete phantom in R-link tree are avoid through beforehand predication.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.465-466
• /
• 2006

A single-wall carbon nanotube (SWCNT) has been studied as a material of Nano-Eletro-Mechanical-System (NEMS) device together with various nanowires. In order for oscillation of a multi-wall carbon nanotube (MWCNT) or a single-walled carbon nanotube (SWCNT) on plane surface, it needs suspension of a CNT across trench electrodes. So we propose fabrication method of a MWCNT resonator using dielectrophoresis and show successful results of suspeneded MWNT. Thin electrodes with large gaps could not suspend small diameter MWNT but thicker electrodes could. Thin MWNT could be suspended only when the electrode gap was reduced.

• 한국항공운항학회지
• /
• 제17권1호
• /
• pp.64-70
• /
• 2009

Because of globalization, flight trips are generalizing, however in proportion to this, it is increasing that people who afraid of riding an airplane because of flight phobia. ‘Flight Phobia’ is individual problem; however it can be factors to suspend of flight schedules. This research is experimental analyzed the recognition degree of flight attendants and cabin attendants about flight phobia and suggested the direction of management about related problems. This research examines meanwhile overlooked importance of flight phobia and the actual condition and if problems are happened, this research will be used valuable to manage quickly and safely.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.383-385
• /
• 2010

This study analyzed the change of flowout and suspend solid in Andong and Imha basin according to the climate change to develop evaluation index about turbid water occurrence possibility and to support the countermeasures for turbid water management using GIS-based Soil and Water Assessment Tools (SWAT). MIROC3.2 hires model values of A1B climate change scenario that were supplied by Intergovernmental Panel on Climate Change (IPCC) were applied to future climage change data. Precipitation and temperature were corrected by applying the output value of 20th Century Climate Coupled Model (20C3M) based on past climate data during 1977 and 2006 and downscaled with Change Factor (CF) method. And future climate change scenarios were classified as three periods (2020s, 2050s, 2080s) and the change of flowout and suspended solid according to the climate change were estimated by coupling modeled value with SWAT model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.421-426
• /
• 2003

Dropper which can get to suspend contact wire should be installed with a uniform distribution, so that electric locomotive can have good characteristics of current collection. Because dropper distribution is changed according to a circumstances in the construction field, it is hard to calculate and construct a overhead line. Therefore, in this study, a program was developed to calculate the dropper length in the normal and elevation section. Through the program, it is possible to perform a accurate construction of overhead line and contribute to a improvement of current collection as well.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.209-211
• /
• 2015

Evaporation characteristics of a single droplet of carbon nanofluids were investigated in a rapid compression machine(RCM). n-Heptane and carbon black N990 were used to synthesize the carbon nanofluids. RCM is an experimental set-up to simulate a single compression stroke of reciprocating engine. Temperature and pressure in a reaction chamber were measured during the compression stroke. After the piston reaches top dead center(TDC), temperature and pressure decreased due to the heat loss at wall. In that process, a single droplet of carbon nanofluids underwent unsteady condition. A single droplet was put at the center of reaction chamber. Thermocouple whose tip is $50{\mu}m$ was used not only to measure transient bulk temperature, but also to suspend the droplet. The picture of single droplet was taken using high speed camera with a frame rate of 500 fps. From those pictures, the droplet diameter was measured by visual basic program.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.746-752
• /
• 2011

In this paper, a novel bearingless switched reluctance motor (BLSRM) with double stator is proposed. This motor has two stators. Torque stator is outside, which mainly produces rotational torque. Radial force stator is inside, which mainly generates radial force to suspend the rotor. A novel structure and operating principle are presented. And characteristics of the proposed structure such as magnetic flux distribution, inductance, torque and radial force are analyzed through finite element method. From the analysis, the proposed BLSRM has linear characteristic of radial force and independence from torque current.