• Journal of the Korean housing association
• /
• v.21 no.2
• /
• pp.49-58
• /
• 2010

This study aims to examine how residents' perception of Neighborhood in the surrounding area changes to the spatial configuration changes due to co-residential area development in old urban area, and find out the characteristics of the perception changes. The research findings are as follows: First, the results of the spatial configuration changes analyzed by Space Syntax Model show that the integration value is between 0.5 and 0.7, which implies that the development in the old urban area does not contribute to the establishment of hierarchy. When the development takes place with the renewal of streets with consideration of the urban context, however, the integration improves relatively. Second, the actual distance and accessibility due to the street network appear to influence the residents' perception of Neighborhood. After the development, the residents' scope of perception increases on average. Third, the changes in the integration value of the streets after the development appear to influence the residents' scope of perception of Neighborhood. It turns out that there are frequent changes in the residents' scope of perception in the surrounding area around the streets with large increase in integration value, and the perception scope also moves to the center.

• Tunnel and Underground Space
• /
• v.7 no.2
• /
• pp.116-129
• /
• 1997

The objective of this study is to predict the minimization effect of the noise and vibration during the construction and the train operation regarding to the design modification of the Taegu Subway Line No. 1. It was suggested optimal control blasting methods to reduce the causing vibration Nuance to the resident in City Taegu and also proposed the better governing method to decrease the environmental hazard to the near buildings and residents during the train operation. When the high-density gaseous reaction of explosion products exerts a high pressure in motion outward, a dynamic stress field will be created in the surrounding buildings. Therefore, in the region close to the charge, permanent damage begins to occur at a great critical level of partial velocity, that is difficult from different structure as working conditions. It is reliable to predict that the damages could be reduced if we know the peak velocity and the exact reasons through the conducting of detail studies of structural analysis of the related buildings with the optimal blasting designs. A blasting technique should be deemed to take advantage of the reduction of damage of the surrounding rocks and structures to improve the in-city blasting. This is a typical in-city blasting operation where success depends on closely controlling the ground vibrations in case of better designed blasting methods. There are techniques that can be applied to prevent large vibrations from damaging the important buildings through the Route Modification of the Taegu Subway Line No. 1.

• Tribology and Lubricants
• /
• v.22 no.3
• /
• pp.127-130
• /
• 2006

DLC (Diamond Like Carbon) films show very desirable surface interactions with high hardness, low friction coefficient, and good wear-resistance properties. The friction behavior of hydrogenated DLC film is dependent on tribological environment, especially surrounding temperature. In this work, the tribological behaviors of DLC (Diamond-like carbon) films, prepared by the radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) method, were studied in elevated temperatures. The ball-on-disk tests with DLC films on steel specimens were conducted at a sliding speed of 60 rpm, a load of 10N, and surrounding various temperatures of $25^{\circ}C,\;40^{\circ}C,\;55^{\circ}C\;and\;75^{\circ}C$. The results show considerable dependency of DLC tribological parameters on temperature. The friction coefficient decreased as the surrounding temperature increased. After tests the wear tracks of hydrogenated DLC film were analyzed by optical microscope, scanning electron spectroscopy (SEM) and Raman spectroscopy. The surface roughness and 3-D images of wear track were also obtained by an atomic force microscope (AFM).

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.6
• /
• pp.407-413
• /
• 2011

This study was analyzed and investigated to evaluate ecological distribution of medicinal plants in Miho Stream of Korea. Totality 463 taxa of vascular plants were appeared in lower part of Miho Stream. Medicinal plants were distributed 253 taxa, which were 54.6% of the total vascular plants appeared. Medicinal plants of official drug compendium(Korean pharmacopoeia) were 85 taxa. Medicinal plants were distributed most of the forest area, and followed field surrounding, stream surrounding and paddy surrounding respectively. The distribution of life form hemicryptophyte was the most frequent. Plant community of appearing area of medicinal plants was classified into Salix koreensis, Phragmites japonica, Echinochloa crusgalli, Artemisia selengensis, Miscanthus sacchariflorus, Setaria faberii, Panicum dichotomiflorum, Bidens frondosa, Humulus japonicus, Monochoria vaginalis var. plantaginea, Eleocharis kuroguwai, Erigeron acris, Pinus densiflora, Pinus rigida, Quercus acutissima, Quercus serrata, Robinia pseudoacacia and Castanea crenata community. Medicinal plants in plant communities that occur frequently were Humulus japonicus, Corylus heterophylla and Liriope spicata.

• Korean Institute of Interior Design Journal
• /
• v.14 no.6 s.53
• /
• pp.193-201
• /
• 2005

In this study we analyzed and interpreted the phenomenologlcal characteristics and meanings of water space in religious architecture through field studies and phenomenologlcal approaches, focusing on the religious architecture Introducing water space in contemporary architecture. The phenomenological experience elements of the research ate light, time, place and context. As the results of this study, first, light as a phenomenological element not only induces a contrast and change between light and the shadow in architectural space and various changes of light in inner space, but also operates as an element which expresses building features outward with time. Second, time as a phenomenological perception experience makes us feel changes of the environment and physical properties and experience space visually and physically. The continuity of time shows the change of a day, night and daytime and seasons. Third, water space makes the sense of place more remarkable, connected closely with surrounding nature In outer space, and creates a new space. Fourth, water space is a contextual element which harmonizes with surrounding environment by connecting surrounding natural environment with architectural space. Fifth, water space in religious architecture is a symbolic and central element, and emphasizes the atmosphere of architectural space. In addition, it makes the people who experience water space perceive the place by triggering sensitive response.

• Geomechanics and Engineering
• /
• v.22 no.6
• /
• pp.553-564
• /
• 2020

In this study, a simple numerical approach for a circular tunnel opening in strain-softening surrounding rock is proposed considering out-of-plane stress and seepage force based on Biot's effective stress principle. The plastic region of strain-softening surrounding rock was divided into a finite number of concentric rings, of which the thickness was determined by the internal equilibrium equation. The increments of stress and strain for each ring, starting from the elastic-plastic interface, were obtained by successively incorporating the effect of out-of-plane stress and Biot's effective stress principle. The initial value of the outmost ring was determined using equilibrium and compatibility equations. Based on the Mohr-Coulomb (M-C) and generalized Hoek-Brown (H-B) failure criteria, the stress-increment approach for solving stress, displacement, and plastic radius was improved by considering the effects of Biot's effective stress principle and the nonlinear degradation of strength and deformation parameters in plastic zone incorporating out-of-plane stress. The correctness of the proposed approach is validated by numerical simulation.

• Structural Engineering and Mechanics
• /
• v.72 no.5
• /
• pp.597-615
• /
• 2019

The paper studies the dispersion of the axisymmetric longitudinal wave propagating in the "hollow cylinder + surrounding medium" system with inhomogeneous initial stresses caused by the uniformly distributed radial compressional forces acting at infinity. Up to now in the world literature, there exist only a few investigations related to the wave dispersion in a hollow cylinder with inhomogeneous initial stresses. Therefore, this paper is one of the first attempts in this field in the sense of the development of investigations for the case where the cylinder is surrounded with an infinite medium. The three-dimensional linearized theory of elastic waves is used for describing the considered wave propagation problem and, for a solution to the corresponding mathematical problem, the discrete-analytical solution method is developed and employed. The corresponding dispersion equation is obtained and this equation is solved numerically and, as a result of this solution, the dispersion curves are constructed for the first and second modes. By analyzing these curves, the character of the influence of the inhomogeneous initial stresses on the dispersion curves is established. In particular, it is established that as a result of the inhomogeneity of the initial stresses both new dispersion curves and the "band gap" for the wave frequencies can appear.

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.19-24
• /
• 2007

The deposition behavior of soot particles in a diffusion flame along a solid wall was examined experimentally by getting rid of the effect of natural convection utilizing microgravity environment. The microgravity environment was realized by using a drop tower facility. The fuel for the flame was an ethylene ($C_2H_4$) and the surrounding oxygen concentration 35% with the surrounding air velocity of $V_a$=2.5, 5, and 10 cm/s. Laser extinction method was adopted to measure the soot volume fraction distribution between the flame and burner wall. The results show that observation of soot deposition in normal flame was difficult from buoyancy and the relative position of flame and solid surface changes with time. The soot particle distribution region moves closer to the surface of the wall as the surrounding air velocity is increased. And the experiments determined the trace of the maximum soot concentration line. It was found that the distance between soot line and flame line is around 5 mm. That is, the soot particle near the flame zone tends to move away from flame zone because of thermophoretic force and to concentrate at a certain narrow area inside of the flame, finally, to adhere the solid wall.

• The korean journal of orthodontics
• /
• v.11 no.2
• /
• pp.161-168
• /
• 1981

This study was undertaken to observe the histologic changes of surrounding maxillary sutures to the widening of midpalatal suture, using two adult dogs, weighing about 10 kg, for experimental, and one for control group. After widening of the midpalatal suture with expansion screw for ten days was performed, and followed by sacrifice of experimental animals. Tissues were excised from 5 surrounding maxillary suture portions such as, internasal, interfrontal, midsagittal, zygomatrco-temporal, and midpalatal sutures. After that, the specimens were fixed and decalcified in $10\%$ formalin sol. and $5\%$ nitric acid. Embedding in paraffin and serial sections at a thickness of 5 micron was done, After Hematoxylin-Eosin staining and light microscopic examination, Following results were obtained: 1. In midpalatal suture area, which showed most prominent histologic change, High degree of fibronlastic and osteoblastic proliferation lining the bony trabeculae with osteoid tissue projection into the fibrous connective tissue were observed. 2. In interfrontal suture area, moderate degree of fibroblastic and osteoblastic proliferation was observed. 3. In internasal suture area, active osteoblastic and osteoclastic proliferation lining the bony trabeculae was observed, and separation of fibrous connective tissue was also observed. 4. In midsagittal and zygomatico-temporal suture areas, no histologic changes can be observed.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.428-433
• /
• 2013

PURPOSE. The present study was aimed to evaluate the influence of implant contact ratio and stiffness of implant-surrounding materials on the resonance frequency analysis (RFA) values. MATERIALS AND METHODS. Seventy resin blocks that had the different amounts (100, 50, 30, 15%) of resin-implant contact (RIC) were fabricated. Ten silicone putty blocks with 100% silicone-implant contact were also made. The implants with ${\phi}5.0mm{\times}13.0mm$ were placed on eighty specimen blocks. The RFA value was measured on the transducer that was connected to each implant by Osstell Mentor. Kruskal-Wallis and Scheffe's tests (${\alpha}$=.05) were done for statistical analysis. RESULTS. The control resin group with 100% RIC had the highest RFA value of 83.9, which was significantly different only from the resin group with 15% RIC among the resin groups. The silicone putty group with 100% contact had the lowest RFA value of 36.6 and showed statistically significant differences from the resin groups. CONCLUSION. Within the limitations of this in vitro study, there was no significant difference in the RFA values among the resin groups with different RIC's except when the RIC difference was more than 85%. A significant increase in the RFA value was observed related to the increase in stiffness of material around implant.