• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2007

Present tooth bonding system can be categorized into total etching bonding system (TE) and self-etching boding system (SE) based on their way of smear layer treatment. The purposes of this study were to compare the effectiveness between these two systems and to evaluate the effect of number of themocycling on microleakage of class V composite resin restorations. Total forty class V cavities were prepared on the single-rooted bovine teeth and were randomly divided into four experimental groups: two kinds of bonding system and another two kinds of thermocycling groups. Half of the cavities were filed with Z250 following the use of TE system, Single Bond and another twenty cavities were filled with Metafil and AQ Bond, SE system. All composite restoratives were cured using light curing unit (XL2500, 3M ESPE, St. Paul, MN, USA) for 40 seconds with a light intensity of $600mW/cm^2$. Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Half of teeth were thermocycled 500 times and the other half were thermocycled 5,000 times between $5^{\circ}C$ and $55^{\circ}C$ for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}A$) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. From this study, following results were obtained: There was no interaction between variables of bonding system and number of thermocycling (p = 0.485). Microleakage was not affected by the number of thermocycling either (p = 0.814). However, Composite restoration of Metafil and AQ Bond, SE bond system showed less microleakage than composite restoration of Z250 and Single Bond, TE bond system (p = 0.005).

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.433-440
• /
• 2003

Osmotic and solid matrix priming treatments enhanced germination performance. We compared osmotic with solid matrix priming to determine the more effective treatment for improving seed germination in pepper and tomato. Seed hydration was immediately observed after osmotic priming and solid matrix priming treatment. The moisture content of solid matrix primed seeds was lower than that of osmotic primed seeds in the two vegetable crops. Osmotic priming and solid matrix priming did not increased percent germination, but showed shorter number of days to 50% of the final germination percentage ($T_{50}$) compared with untreated seeds, regardless of germination temperature. $T_{50}$ value was reduced in osmotic or solid matrix primed pepper seeds about 6.0, 5.0, 4.6 and 4.0 days compared with untreated seeds at 15, 20, 25, and $30^{\circ}C$, respectively. While, that in tomato seeds was reduced about 3.3, 5.0, 4.6 and 4.0 days compared with untreated seeds at 15, 20, 25, and $30^{\circ}C$, respectively. The effectiveness of osmotic priming or solid matrix priming in reducing the $T_{50}$ was greater when the seeds were germinated at $15^{\circ}C$ than at temperature of higher than $20^{\circ}C$. Solid matrix primed seeds germinated faster than osmotic primed seeds at all temperature in pepper. However, there was no significant difference on the percentage germination between solid matrix and osmotic primed seeds in tomato. After priming, dried-bark seeds showed faster germination than surface-dried seeds in pepper. On the other hand, there was no significant difference in tomato. Emergence of pepper and tomato seeds was markedly enhanced by osmotic priming or SMP treatment although the final emergence percentage was not significantly influenced. On the other hand, early growth was not significantly influenced by osmotic priming or SMP treatment of pepper and tomato seeds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.291-298
• /
• 2021

Purpose. The purpose of this study is to compare five interdental cleansing products' effectiveness on removing artificial dental plaque on the interdental space of zirconia crowns. Materials and methods. A model with abutments on the right mandibular second premolar and first molar were prepared. 10 zirconia crowns for each abutment were fabricated. After applying artificial dental plaque between the zirconia crowns, a single clinician attempted to remove the plaque with five products: interdental toothbrush, end-tuft toothbrush, dental floss, Easypick, Water pik. They were conducted 10 times per group. The aspect and area of removed surfaces were analyzed using images taken with a digital camera. One factor analysis of variance was performed as a statistical analysis, and a post-hoc test was performed using the Scheffé method (P < .05). Results. There were differences in the area and the pattern according to the characteristics of the products. The largest area, including the marginal portion, was removed in the dental floss group. Interdental toothbrush group was the most effective in removing the dental plaque at the marginal portion. Easypick was less effective than the interdental toothbrush. The end-tuft toothbrush showed better results than other products in cleansing mesiobuccal and distobuccal area, but could not cleanse the area directly below the contact point. In Water pik group, artificial dental plaque was scarcely removed. The removal rate of artificial dental plaque was in the order of floss (69.47%), end-tuft toothbrush (49.36%), interdental toothbrush (44.20%), Easy pick (13.04%), and Water pik (0.59%). Conclusion. Dental floss showed the highest removal rate in the interdental space restored with zirconia crowns, while interdental toothbrush was the most effective in removing the dental plaque at the marginal portion.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.494-501
• /
• 2010

The purpose of this study was to examine the presence of Bacillus cereus, aerobic bacteria and coliforms in the raw material of infant formulas and investigate the manufacturing process in terms of microbial safety. Among ten kinds of raw infant formula material samples (n=20), Bacillus cereus appeared in two (n=4). Aerobic bacteria were not detected in raw infant formula material or maximum 4.15 log CFU/g. Eleven species of aerobic bacteria were isolated and 76% of them were Sphingomonas paucimobilis, Pseudomonas fluorescens, Rhizobium radiobactor, or Stenotrophomonas maltophilia. A Pearson's correlation analysis revealed that the most influential factors for detecting Bacillus cereus were aerobic bacteria and coliforms. In other words, when the measured values of aerobic bacteria and coliforms were higher, the possibility that Bacillus cereus would appear increased. In a regression model to predict Bacillus cereus, the rate of appearance was correlated with aerobic bacteria and coliforms, and its contribution rate for effectiveness was 86%. Improving microbial quality control by pasteurization, spray dry, popping and extrusion resulted in a decrease in the numbers of Bacillus cereus, aerobic bacteria and coliforms in the raw materials. The results suggest that a hazard analysis and critical control point system might be effective for reducing microbiological contamination.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.55-63
• /
• 2024

Purpose: This study aimed to assess the antimicrobial efficacy of an 810-nm infrared diode laser with indocyanine green (ICG) against Staphylococcus aureus on sandblasted, large grit, and acid-etched (SLA) titanium surfaces, comparing its effectiveness with alternative chemical decontamination modalities. Materials and Methods: Biofilms of S. aureus ATCC 25923 were cultured on SLA titanium disks for 48 hours. The biofilms were divided into five treatment groups: control, chlorhexidine gluconate (CHX), tetracycline (TC), ICG, and 810-nm infrared diode laser with ICG (ICG-PDT). After treatment, colony-forming units were quantified to assess surviving bacteria, and viability was confirmed through confocal laser-scanning microscope (CLSM) imaging. Results: All treated groups exhibited a statistically significant reduction in S. aureus (P < 0.05), with notable efficacy in the CHX, TC, and ICG-PDT groups (P < 0.01). While no statistical difference was observed between TC and CHX, the ICG-PDT group demonstrated superior bacterial reduction. CLSM images revealed a higher proportion of dead bacteria stained in red within the ICG-PDT groups. Conclusion: Within the limitations, ICG-PDT effectively reduced S. aureus biofilms on SLA titanium surfaces. Further investigations into alternative decontamination methods and the clinical impact of ICG-PDT on peri-implant diseases are warranted.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.130-137
• /
• 2012

This research evaluated the effectiveness of organic matter ratios in substrate and mulching materials under mn-irrigated condition green roofs by measuring the effects on growth of Liatris spicata. Four mulching materials were installed, i. e. nun-mulched control(CON), volcanic ash soils(VAS), non-woven black fabric mat(NBM) and pine bark(PAK). Three levels of organic maller volume percentage in an amended soil were evaluated, amended soil: organic matter=100:0($A_1O_0$), amended soil: organic matter=80:20($A_4O_1$) and amended soil: organic matter=50:50($A_1O_1$). Plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were recorded from April to September, 2010, and survival rate was examined on May 2011 of the following year. In the $A_1O_0$, the number of leaves, number of florets and chlorophyll contents were higher in Liatris spicata grown on NBM than other mulching treatments. Especially, plant height, shoot fresh and dry weight were significantly higher. However, it resulted the lowest survival rate than other mulching treatments. 2. In the $A_4O_1$, the plant height, number of leaves, number of florets, shoot fresh and dry weight were higher than other mulching treatments, but there was no significant difference except for the plant height of Liatris spicata grown on NBM. The survival rate was decreased by 40~60%, compared with $A_1O_0$, after overwintering. 3. In the $A_1O_1$, the plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were slightly higher than other mulching treatments, but there was no significant difference from Liatris spicata grown on NBM and VAS. The survival rate was observed by 0% over all mulching treatments after overwintering. Therefore, the non-woven black fabric mat(NBM) promoted the Liatris spicata's growth and flowering compared with other mulching treatments. However, the survival rate was decreased significantly, and the organic matter ratios were increased after overwintering under non-irrigated green roofs.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2005.05a
• /
• pp.383-405
• /
• 2005

The traditional market is foremost a regionally positioned place, wherein the market directly represents regional and cultural centered traits while it plays an important role in the circulation of facilities through reciprocal, informative and cultural exchanges while sewing to form local communities. The traditional market in Korea is one of representative retail businesses and premodern marketing techniques by family owned business of less than five members such as product management, purchase method, and marketing patterns etc. Since the 1990s, the appearance of new circulation-type businesses and large discount convenience stores escalated the loss of traditional competitiveness, increased the living standard of customers, changed purchasing patterns, and expanded the ubiquity of the Internet. All of these changes in external circulation circumstances have led the traditional markets to lose their place in the economy. The traditional market should revive on a regional site basis through the formation of a community of regional neighbors and through knowledge-sharing that leads to the creation of wealth. For the purpose of creating a wealth in a place, the following components are necessary: 1) a facility suitable for the spatial place of the present, 2)trust built through exchanges within the changing market environment, which would simultaneously satisfy customer's desires, 3) international bench marking on cases such as regionally centered TCM (England), BID (USA), and TMO (Japan) so that the market unit of store placement transfers from a spot policy to a line policy, 4)conversion of communicative conception through a surface policy approach centered around a macro-region perspective. The budget of the traditional market funding policy was operational between 2001 and 2004, serving as a counter move to solve the problem of the old traditional market through government intervention in regional economies to promote national economic strength. This national treasury funding project was centered on environmental improvement, research corps, and business modernization through the expenditure of 3,853 hundred million won (Korean currency). However, the effectiveness of this project has yet to be to proven through investigation. Furthermore, in promoting this funding support project, a lack of professionalism among merchants in the market led to constant limitations in comprehensive striving strategies, reduced capabilities in middle-and long-term plan setup, and created reductions in voluntary merchant agreement solutions. The traditional market should go beyond mere physical place and ordinary products creative site strategies employing the communicative approach must accompany these strategies to make the market a new regional and spatial living place. Thus, regarding recent paradigm changes and the introduction of region-based site functions into the traditional market, acquiring a conversion of direction into the newly developed project is essential to reinvestigate the traditional market composed of cultural and economic meanings, for the purpose of the research. Excavating social policy demands through the comparative analysis of domestic and international cases as well as innovative and expert management leadership development for NPO or NGO civil entrepreneurs through advanced case research on present promotion methods is extremely important. Discovering the seeds of the cultural contents industry cored around regional resource usages, commercializing regionally reknowned products, and constructing complex cultural living places for regional networks are especially important. In order to accelerate these solutions, a comprehensive and systemized approach research operated within a mentor academy system is required, as research will reveal distinctive traits of the traditional market in the aging society.