• Composites Research
• /
• 제23권5호
• /
• pp.30-38
• /
• 2010

성형조건에 따른 GMT-Sheet를 관찰하여, 성형품 표면의 불량원인을 조사했다. 현미경 관찰 결과, GMT-Sheet 성형품의 표면에서 구정, 섬유돌출, 크랙, 섬유노출, 마이크로 웰드라인, 핀홀, 여파굴곡곡선 등의 결함을 발견했다. 이 결함들은 요철의 발생원인이고, 표면 광택에 영향을 주는 현상이다. 그리고 표면거칠기에 영향을 주는 요철의 가장 주요한 발생원인은 보압 냉각 과정에서 발생하는 모재의 수축이었다. 성형 시의 보압하중이 높을수록 GMT-Sheet 성형품 표면은 좋아졌다. 또한 서냉실험에서는 탈형온도가 낮을수록 성형품의 표면이 좋아졌다.

• International Journal of Human Ecology
• /
• 제8권1호
• /
• pp.27-37
• /
• 2007

The purpose of this study is to investigate the preference of the hand and the sensibility image of underwear textiles according to seasons. According to a recent survey of 109 college students, using a 7 scale evaluation to the preference of the hand and the sensibility image among 13 summer and 10 winter underwear textiles. The data was analyzed through mean, SD, factor analysis, t-test, Person correlation analysis and regression analysis using SPSS Win 11.0. The summer underwear textiles were classified according to six tactile factors: stiffness/surface unevenness, weight, elasticity, moistness, extension, and warm-cool and 3 sensibility image factors: elegant individual, modern, and sporty-casual. The winter textiles were classified according to six tactile factors: stiffness/surface unevenness, elasticity, warm-cool, drapability, moistness and flexibility and divided into 2 sensibility images: modern elegant and sporty-casual. Factors expressing hand and sensibility image according to season showed significant difference. In the summer, weight, in the winter, drapability and flexibility showed significant difference at the hand factor evaluation. The hand factors: weight, warm-cool and modern sensibility image factors effect the preference of summer underwear textile, also the hand factors-elasticity, stiffness/surface unevenness and the sensibility image factor-easy-sport-casual-effect the preference of winter textiles. Therefore, the thin, light, and cool textiles which are also gorgeous and sporty-casual are preferred for summer underwear textiles while soft, simple and comfortable textiles are preferred for winter textiles.

• Composites Research
• /
• 제24권6호
• /
• pp.31-36
• /
• 2011

성형조건에 따른 GMT-Sheet를 관찰하여, 성형품 표면의 섬유돌출을 조사했다. 섬유돌출은 모재의 수축에 의해서 성형품 표면에 생성되는 불량현상의 하나이다. 즉, 섬유돌출은 성형온도에서 상온까지 성형품이 냉각될 때 모재와 유리섬유의 수축차에 의해 발생하는 표면불량 현상이다. 성형품 표면의 섬유돌출 높이는 보압 냉각과정에서 성형압력이 클수록 작게 나타남을 알 수 있다. 성형품 표면의 섬유돌출 높이는 성형압력의 영향이 지배적임을 알 수 있다. 성형압력을 고려하여, 성형품의 표면요철 생성과정과 섬유돌출 높이 변화를 규명했다. 그리고 피복층은 표면불량 현상을 억제하는 효과가 있고, 표면으로부터 섬유돌출이나 크랙이 보이지 않았다. 피복층은 표면거칠기를 단일재료인 폴리프로필렌 정도까지 개선하였다.

• 대한인간공학회지
• /
• 제33권6호
• /
• pp.543-551
• /
• 2014

Objective: The purpose of this study is to identify visual perception of and satisfaction with the orange peel effect of surface. The orange peel effect is a type of finish on painted or coated surface. Background: Gloss paint sprayed on a smooth surface (such as car body, smart phone, and electric home appliances, etc.) should also dry into a smooth surface. Then, a surface resembling the texture of an orange peel can be caused by some factors. The orange peel effect can degrade user's satisfaction with a product. Method: Visual perception and emotional satisfaction were subjectively evaluated using Likert scale. The significance of orange peel effect on visual perception and satisfaction were then analyzed by the analysis of variance. The correlation between visual perception and satisfaction was also analyzed. Results: Surface roughness significantly influenced visual perception and emotional satisfaction. The level of visual perception increased and emotional satisfaction decreased with the increase of orange peel effect. Emotional satisfaction decreased with the increase of visual perception level. Conclusion: It was identified that orange peel phenomenon on surface was a very important factor for emotional satisfaction. The orange peel effect on the surface of a product should be minimized to improve the emotional satisfaction of the product. Application: The result of this study can be applied to the texture design of the body of a car, smart phones, and electric home appliances, etc.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.485-488
• /
• 2006

Surface roughening which is occurred by interaction between base paper and water in coating color deteriorates surface properties of coated paper. In this study, the effect of calendering variables on surface roughening and the relationship between hot calendering and water penetration depth were investigated. BCTMP handsheets were calendered at the various conditions of temperature and linear load, and its PPS roughness was measured before and after moistening to evaluate surface roughening. To determine water penetration depth, thickness was measured from the cross sectional images of sheet which were obtained using CLSM technique. High pressure calendering was beneficial to reduce surface roughness before coating but its smoothening effect was mostly lost by contact with water. On the contrary, sheet calendered at the highest temperature showed the lowest roughening. High temperature calendering allowed the smallest penetration of water into fiber network because of sufficient deformation and densification in top side of z-direction of sheet. Consequently, hot calendering could be the effective way to reduce surface roughening and unevenness of paper surface.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1649-1657
• /
• 2010

성형조건에 따른 GFRP 복합재료를 관찰하여, 성형품 표면의 불량원인을 조사했다. 표면거칠기에 영향을 주는 요철의 가장 주요한 발생원인은 보압 냉각 과정에서 발생하는 모재의 수축이었다. GFRP 복합재료 성형품 표면은 성형 시의 보압하중이 높을수록 좋아졌고, 서냉실험에서는 탈형온도가 낮을수록 성형품의 표면이 좋아졌다. 그리고 보압하중과 탈형온도를 고려하여, 성형품의 표면요철 생성과정과 섬유돌출 높이 변화를 규명했다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.78-81
• /
• 2004

In this paper, the effect of adhesion properties of semiconductive-insulating interface layer of silicone rubber on electrical properties was investigated. Surface structure and adhesion of semiconductive silicon rubber by surface asperity was obtained from SEM and T-peel test. In addition, ac breakdown test was carried out for elucidating the change of electrical property by roughness treatment. From the results, Adhesive strength of semiconductive-insulation interface was increased with surface asperity. Dielectric breakdown strength by surface asperity decreased than initial Specimen, but increased from Sand Paper #1200. According to the adhesional strength data unevenness and void formed on the silicone rubber interface expand the surface area and result in improvement of adhesion. Before treatment Sand Paper #1200, dielectric breakdown strength was decreased by unevenness and void which are causing to have electric field mitigation small. After the treatment, the effect of adhesion increased dielectric breakdown strength. It is found that ac dielectric breakdown strength was increased with improving the adhesion between the semiconductive and insulating interface.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.116-117
• /
• 2009

In this study, As a previous stage to manufacture disposable tent for military camouflage, we examine possibility of inorganic material absorption on PET surface. In order to, we created unevenness by sputtering process on PET surface and made absorption with Zirconium (ZIA) that has nano particles. and we went on study to its effect.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.47-53
• /
• 2006

To meet the ever increasing quality demand of coated papers and duplex boards, the local gloss variation and print unevenness must be avoid. To do this, surface roughening phenomenon which affects local gloss and print unevenness was investigated. In this study, the effect of roughness and densification of sheet obtained at various calendering conditions on surface roughening was examined. To evaluate the calendering effect properly we introduced a new value of roughening index by moisture for evaluation of surface roughening. Caliper and roughness of sheet decreased with increasing of calendering temperature and pressure, and the remarkable reduction of those properties occurred at the temperature around Tg. Roughening index increased when the amount of water increased and calendaring temperature and pressure increased. And as the sheet became denser by calendering, the roughening index increased to some extent. But roughening index by moisture is the lowest for sheet precalendered at higher temperature condition. When the surface of calendered sheet is rougher, there is more roughening of surface. The severe condition of calendering made the roughening index by moisture small.

• International Journal of Contents
• /
• 제4권2호
• /
• pp.7-12
• /
• 2008

In this paper, we present a real-time physical simulation model of water surfaces with a novel method to represent the water mass flow in full three dimensions. In a physical simulation model, the state of the water surfaces is represented by a set of physical values, including height, velocity, and the gradient. The evolution of the velocity field in previous works is handled by a velocity solver based on the Navier-Stokes equations, which occurs as a result of the unevenness of the velocity propagation. In this paper, we integrate the principle of the mass conservation in a fluid of equilateral density to upgrade the height field from the unevenness, which in mathematical terms can be represented by the divergence operator. Thus the model generates waves induced by horizontal velocity, offering a simulation that puts forces added in all direction into account when calculating the values for height and velocity for the next frame. Other effects such as reflection off the boundaries, and interactions with floating objects are involved in our method. The implementation of our method demonstrates to run with fast speed scalable to real-time rates even for large simulation domains. Therefore, our model is appropriate for a real-time and large scale water surface simulation into which the animator wishes to visualize the global fluid flow as a main emphasis.