• Macromolecular Research
• /
• v.15 no.5
• /
• pp.465-468
• /
• 2007

• Korean Journal of Human Ecology
• /
• v.15 no.2
• /
• pp.275-281
• /
• 2006

The purpose of this study is to investigate hand and sensibility of PET treated by Ultra-Violet (UV). The 4-channel PET knit fabric was treated by a self-made UV instrument in 5cm distance with different time frames-0min, 30min, and 90min. For hand evaluation, mechanical properties were measured by the KES-FB system. The environmental condition was controlled at 29$^{\circ}C$, 75% (R.H.)-summer standard climate. Twenty female students evaluated 'roughness', 'smoothness', 'wetness', 'stiffness', 'coolness', 'touch', 'preference', and 'comfort'. The outcomes of the experiment are as follows: The surface roughness of mechanical properties showed significant differences and the value of PET irradiated by UV for 90min was highest. The order of primary hand value such as NUMERI and FUKURAMI was in a following order-Untreated > 30min treated > 90min treated. Total hand value showed that PET irradiated by UV for 90min was appropriate for using summer fabric. The results of subjective sensibility were that the untreated and 30min treated PET were recognized as similar and had a good evaluation on 'comfort', 'preference' and 'the sense of touch'. This consequence disagreed with total hand value, because it was considered that subjects' hand sensibility was dependent on the feel of smoothness.

• Fibers and Polymers
• /
• v.2 no.1
• /
• pp.152-156
• /
• 2001

Three different silicone polymer systems, such as aminofunctional, epoxyfunctional, and hydrophilic epoxyfunctional silicone polymers, were applied onto plasma pretreated wool fabric to improve the dimensional properties. The results showed that the plasma pretreatment modified the cuticle surface of the wool fiber and increased the reactivity of wool fabric toward silicone polymers. Felting shrinkage of plasma and silicone treated wool fabric was decreased with different level depending on the applied polymer system. Fabric tear strength and hand were adversely affected by plasma treatment, but these properties were favorably restored on polymer application. Therefore, it has been concluded that the combination of plasma and silicone treatments can achieve the improved dimensional stability, and better performance properties of wool fabric. The surface smoothness appearances of treated fabrics were measured using a new evaluation system, which showed good correspondence with the results of KES-FB4 surface tester.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.417-422
• /
• 2000

In the process of die manufacturing, according to increasing demand of die and molds, the efficient machining of dies and molds has been increased. However, while the cutting process has been automated by the progress of CNC(computer numerical control) and CAD/CAM, the polishing process still depends on the experienced knowledge of an expert. Also, even when workers are skilled in polishing dies. it takes much time to obtain the required roughness and smoothness on the surface of a die. Moreover, many workers gradually avoid doing polishing work because of the poor working conditions caused by dust and noise. Therefore, to improve productivity and to solve the potential shortage of skilled workers, a user-friendly automatic polishing system was developed in this research. The developed polishing system with five degrees of freedom is able to keep the polishing tool normal to the die surface during operation and is able to maintain a pressure constantly by the developed pneumatic system. Also, to evaluate polishing performance of the developend system and find the polishing conditions, the various polishing experiments were carried out.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.14-19
• /
• 2007

Rapid prototyping (RP) technology can fabricate any 3D physical model regardless of geometric complexity using the layered manufacturing (LM) process. Stereolithography (SL) is the best-known example of RP technology. In general, the surface quality of a raw SL-generated part is unsatisfactory for industrial purposes due to the step artefact created by the LM process. Despite of the increased number of applications for SL parts, this side effect limits their uses. In order to improve their surface quality, additional post-machining finishing, such as traditional grinding, is required, but post-machining is time consuming and can reduce the geometric accuracy of a part. Therefore, this study proposes a post-machining technology combining coating and grinding processes to improve the surface quality of SL parts. Paraffin wax and pulp are used as the coating and grinding materials. By grinding the coating wax only up to the boundary of the part, the surface smoothness can be improved without damaging the surface. Finally, moulding and casting experiments were performed to confirm the suitability of the SL parts finished using the proposed process with rapid tooling (RT) techniques.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.3
• /
• pp.221-224
• /
• 2024

The 304 stainless steel has good corrosion resistance, so it is used in various industries. However, in an environment like seawater, stainless steel can be damaged by chloride ions, resulting in surface corrosion such as pitting and crevice corrosion. Electropolishing is a technique that smooths the surface and creates a passivation layer that can resist corrosion. In this study, electropolishing was applied as a surface finish to increase the smoothness of the metal surface and its corrosion resistance. We confirmed the topology of the electropolished surface of stainless steel by optical microscope and evaluated the corrosion resistance characteristics of electropolished stainless steel through a potentiodynamic experiment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.8
• /
• pp.958-968
• /
• 2003

The purpose of this study was to clarify the different mechanical properties of fabrics among the theme groups classified by fashion fabric trend. This study can be useful for fabric marketers and planners to design new products. In order to carry out this study, the fabric samples of representative theme for‘2002/03 F/W fashion fabric trend were collected from a fashion company and were measured to analyze the mechanical properties, hand value(H.V) and total hand value(T.H.V) by KES-FB System. The results were as follows. 1. The theme-A of‘Luxury, Elegance’was consisted of wool, rayon and PET and had a lower B, 2HB of bending properties and a lower G and 2HG5 of shear properties. The theme-B of‘Technical, Functional’was consisted of synthetic fibers such as PET, PA, PU and elastic fiber and had a higher MIU and a lower MMD, SMD of surface properties. The theme-C of‘Vintage, Aged’was consisted of mostly cotton and had the highest B and 2HB. The theme-D of‘Fancy, Airy’was consisted of mostly woolen wool, polyacryl and polyamide and had a high MMD and SMD of surface properties and a high LC and RC of compression properties. 2. As the results of analyzing H.V and T.H.V through KES-FB system, the theme-A showed a higher Smoothness and lower Stiffness. The theme-B had a lower Smoothness, Fullness, Soft feeling and T.H.V and the theme-C had the highest Stiffness. The theme-D showed the highest Fullness and Soft Feeling but the lowest Stiffness.

• Korean Journal of Human Ecology
• /
• v.20 no.5
• /
• pp.1025-1034
• /
• 2011

The purpose of this study was to examine the evaluation of fabric characteristics on the drapability, texture image and preference of blouse fabrics, and to analyze the effects of the texture image, objective and subjective drapability on the preference. As specimen, silk and polyester fabrics were collected. 52 female subjects evaluated 16 specimens with semantic differential scale of 18 fabric image and 20 sensibility. Data were analyzed through factor analysis, pearson correlational coefficient using spss win 12.0. For the evaluation, structural characteristics such as fiber contents, weave type, weight and thickness were analyzed. The results were as follows: The evaluation results of objective and subjective drapability showed differences. Sensory image factors of blouse fabrics were 'surface smoothness', 'elasticity', 'weight' and 'flexibility'. Sensibility image factors were 'elegance', 'classic', 'characteristic' and 'mannish'. 'Elegance', 'classic' and 'characteristic' of sensibility images showed high correlation with 'surface smoothness' and 'elasticity' of sensory image, also 'mannish' of sensibility image showed significant correlation with 'weight' of sensory image. The significant fabric characteristics affecting objective drapability were density, weight, thickness. The significant texture image factors affecting objective drapability were 'weight', 'flexibility' of sensory image and 'elegance' of sensibility image. On the other hand, the significant factors affecting subjective drapability were thickness of fabric characteristics and 'elegance', 'characteristic', 'mannish' of sensibility images. 'Elegance', 'characteristic' and 'classic' of sensibility image, 'elasticity' of sensory image and subjective drapability affected on the purchase preference.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.504-509
• /
• 1999

In-situ cleaning and subsequent silicon epitaxial film growth were performed in a load-locked reactor equipped with Hg-grid UV lamp and PBN heater to obtain the smooth and contaminant-free underlying surface and develop low-temperature epitaxial film growth process. The removals of organic and native oxide were investigated using UV-excited $O_2$ and $NF_{3}/H_{2}$, and the effect of the surface condition was examined on the quality of silicon epitaxial film grown at temperature as low as $750^{\circ}C$. UV-excited gas phase cleaning was found to be effective in removing the organic and native oxide successfully providing a smooth surface with RMS roughness of 0.5$\AA$ at optimal condition. Crystalline quality of epitaxial film was determined by smoothness of cleaned surface and the presence of native oxide and impurity. Crystalline defects such as dislocation loops or voids due to the surface roughness were observed by XTEM.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.570-576
• /
• 1996

Cu films for future ULSI metallization were prepared by partially ionized beam (PIB) deposition and characterized in terms of preferred orientation, grain size, roughness and resistivity. PIB-Cu films were prepared on Si (100) at pressure of $8 \times 10^{-7}$~$1 \times 10^{-6}$ Torr. Effects of acceleration voltage and ionization potential on the properties of PIB-Cu films have been investigated. As the acceleration voltage increased at constant ionization potential of 400 V, the degree of preferred orientation and surface smoothness of the Cu film increased. At the ionization potential of 450 V, the degree of preferred orientation at the acceleration voltage higher than 2 kV decreased and surface roughness increased with acceleration voltage. Grain size of Cu films increased to 1100 $\AA$ initially up to applied acceleration voltage of 1 kV, above which a little increase occurred with the acceleration voltage. There was no indication of impurities such as C, O in all sample. Resistivity of Cu film had the same trends as the surface roughness with acceleration voltage and ionization potential. The increase of electrical resistivity of PIB-Cu films was explained in terms of grain size and surface roughness