• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.21-29
• /
• 2009

In order to enhance the functionality of a cotton fabric actually used as a clothing material for patients, the fabrics were treated with a chitosan/nanosilver mixed solution. The nanosilver had excellent biocompatibility, provided expectation of an additional performance, did not harm human beings, and supplements chitosan, which was disadvantaged if used alone for fabric treatment. The nanosilver was mixed thereto and a treatment effect due to a mixing ratio was considered. This study was observed through mechanical properties and hand value which were the important function. The treatment of chitosan/nanosilver mixed solution gave a smoother surface than the treatment of chitosan alone. As a result of evaluation of the forms according to KES-FB system, Koshi was deduced, and both Numeri and Fukurami were increased. Thereby, the cotton fabric was a little smooth to provide elasticity, due to the treatment of chitosan/nanosilver mixed solution. THV of the treated fabrics calculated from this basis increased at all mixing ratio as compared with the untreated fabric. The fabrics treated with chitosan/nanosilver mixed solution were shown a better THV than the fabric treated with chitosan alone.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.212-220
• /
• 2015

We investigated nanotextured Si solar cells using the silver-assisted chemical etching process. The nanotexturing process is very sensitive to the concentration of chemical etching solution. The high concentration process results in a nanowire formation for the nanosurfaces and causes severe surface damage to the top region of the micropyramids. These nanowires show excellent light absorption in photoreflectance spectra and radiative light emission in photoluminescence spectra. However, the low concentration process forms a nano-roughened surface and provides high minority carrier lifetimes. The nano-roughened surfaces of the samples show the improved electrical cell properties of quantum efficiency, conversion efficiency, and cell fill factor due to the reduction in the formation of the over-doped dead layer.

• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.80-85
• /
• 2010

This study focused on laser assisted machining (LAM) of silicon nitride ceramic that efficiently removes the material through machining of the softened zone by local heating. The effects of laser-assisted machining parameters were studied for cost reduction, and active application in processing of silicon nitride ceramics in this study. Laser assisted machining of silicon nitride allows effective cutting using CBN tool by local heating of the cutting part to the softening temperature of YSiAlON using by the laser beam. When silicon nitride is sufficiently preheated, the surface is oxidized and decomposed and then forms bloating, micro crack and silicate layer, thereby making the cutting process more advantageous. HIPSN and SSN specimens were used to study the machining characteristics. Higher laser power makes severer oxidation and decomposition of both materials. Therefore, HIPSN and SSN specimens were machined more effectively at higher power.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.571-574
• /
• 2010

Surface recombination loss should be reduced for high efficiency of solar cells. To reduce this loss, the BSF (back surface field) is used. The BSF on the back of the p-type wafer forms a p+layer, which prevents the activity of electrons of the p-area for the rear recombination. As a result, the leakage current is reduced and the rear-contact has a good Ohmic contact. Therefore, the open-circuit-voltage (Voc) and fill factor (FF) of solar cells are increased. This paper investigates the formation of the rear contact process by comparing aluminum-paste (Al-paste) with pure aluminum-metal(99.9%). Under the vacuum evaporation process, pure aluminum-metal(99.9%) provides high conductivity and low contact resistance of $4.2\;m{\Omega}cm$, but It is difficult to apply the standard industrial process to it because high vacuum is needed, and it's more expensive than the commercial equipment. On the other hand, using the Al-paste process by screen printing is simple for the formation of metal contact, and it is possible to produce the standard industrial process. However, Al-paste used in screen printing is lower than the conductivity of pure aluminum-metal(99.9) because of its mass glass frit. In this study, contact resistances were measured by a 4-point probe. The contact resistance of pure aluminum-metal was $4.2\;m{\Omega}cm$ and that of Al-paste was $35.69\;m{\Omega}cm$. Then the rear contact was analyzed by scanning electron microscope (SEM).

• 한국의상디자인학회지
• /
• 제25권1호
• /
• pp.153-168
• /
• 2023

Non-representation creates difference and change that can be used as a creative design method that satisfies contradictory requirements for similarity and differentiation. This study drew upon the characteristics of the concept of non-representation expressed in contemporary art and architecture, in which Gilles Deleuze's philosophical thinking was reflected, and analyzed the non-representation depicted in contemporary fashion. The non-representation expressed in contemporary art and architecture is as follows. Non-representation of delaying becoming focuses on reverting to preexisting objects and redefining traditional meaning, thereby delaying the representation of latent meaning. Non-representation of non-becoming removes existing values and typical forms and expresses amorphousness. Non-representation of becoming by repetition or reiteration realizes the difference caused by the passage of time by repeating or overlapping shapes. Non-representation of becoming expresses the transformation of space by flowing through time rather than by actual movement. Non-representation in contemporary fashion shows the following expression characteristics. First, the non-representation of deferring becoming deconstructs the traditional values and forms of clothing and expresses designs by displacement or juxtaposition. Second, the non-representation of non-becoming is expressed concepts unrelated to the body and focus upon amorphous objects that do not become concretized forms. Third, generative non-representation by repetition and overlap expresses the possibility of change by overlapping clothing items or details expressed by repeating segmented objects. Fourth, generative non-representation by movement reproduces the meaning of space and time by moving the shape of the clothing or visually changing the surface of the material of clothing. As a result of the study, the non-representation shown in contemporary fashion aims for versatility to conform to social changes. This study provides new insight into the fashion design method by increasing the understanding of the cocnept of non-representation and showing its potential.

• Journal of Welding and Joining
• /
• 제33권5호
• /
• pp.53-60
• /
• 2015

Laser surface Melting Process is getting hardening layer that has enough depth of hardening layer as well as no defects by melting surface of substrate. This study used CW(Continuous Wave) Yb:YAG and STD11. Laser beam speed, power and beam interval are fixed at 70mm/sec, 2.8kW and 800um respectively. Hardness in the weld zone are equal to 400Hv regardless of melting zone, remelting zone overlapped by next beam and HAZ. Similarly, microstructures in all weld zone consist of dendrite structure that arm spacing is $3{\sim}4{\mu}m$, matrix is ${\gamma}$(Austenite) and dendrite boundary consists of ${\gamma}$ and $M_7C_3$ of eutectic phase. This microstructure crystallizes from liquid to ${\gamma}$ of primary crystal and residual liquid forms ${\gamma}$ and $M_7C_3$ of eutectic phase by eutectic reaction at $1266^{\circ}C$. After solidification is complete, primary crystal and eutectic phase remain at room temperature without phase transformation by quenching. On the other hand, microstructures of substrate consist of ferrite, fine $M_{23}C_6$ and coarse $M_7C_3$ that have 210Hv. Microstructures in the HAZ consist of fine $M_{23}C_6$ and coarse $M_7C_3$ like substrate. But, $M_{23}C_6$ increases and matrix was changed from ferrite to bainite that has hardness above 400Hv. Partial Melted Zone is formed between melting zone and HAZ. Partial Melted Zone near the melting zone consists of ${\gamma}$, $M_7C_3$ and martensite and Partial Melted Zone near the HAZ consists of eutectic phase around ${\gamma}$ and $M_7C_3$. Hardness is maximum 557Hv in the partial melted zone.

• 청정기술
• /
• 제27권1호
• /
• pp.24-32
• /
• 2021

미연 탄소(unburned carbon, UC)는 대두유를 포수제로 사용하여 부유선별공정을 통해 최대 85.8 wt%까지 비산재로부터 성공적으로 회수되었다. CM (ceramic microsphere)은 부유선별공정 다음 공정인 하이드로 사이클론 분리공정으로부터 18 wt%의 수율을 얻을 수 있었고 회수한 UC와 CM을 각각 고무증량재와 플라스틱(polypropylene) 충진재의 대체재로 사용하여 산업재로 활용 가능성을 조사하였다. 입자가 큰 UC는 볼밀을 사용하여 평균입경 10.2 ㎛로 작게 분쇄하였다. 분쇄된 UC를 점토 대신에 고무증량재로 사용하였을 때 인장강도와 신율이 다소 낮게 나와 고무제품의 표준조건을 만족시키지는 못하였다. 따라서 표준조건을 충족시키기 위해 UC는 고무와 보다 긴밀한 결합이 필요하였고, 이를 위한 표면 에너지를 향상시키는 추가적인 처리가 필요하였다. CM은 평균입경이 5 ㎛의 구형입자로 관찰되었으며, 입자의 표면을 페놀수지, 폴리올, 스테아린산, 올레인산으로 개질하였다. 표면 개질된 CM은 PP (polypropylene) 충진재로 사용되었다. 표면 개질된 CM을 사용한 제품은 흐름성은 양호하였으나 결합력 부족으로 충격강도 및 굴곡강도는 향상되지 못하였다. 그러나 표면 개질된 CM에 유기물과 무기물의 대표적 컬플링제인 실란 1 wt%을 추가적으로 혼합함으로써 충격강도 및 굴곡강도가 크게 향상되는 효과를 얻을 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.101-106
• /
• 2017

$Li_2SiO_3$ was used as a coating material to improve the electrochemical performance of $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$. $Li_2SiO_3$ is not only a stable oxide but also an ionic conductor and can, therefore, facilitate the movement of lithium ions at the cathode/electrolyte interface. The surface of the $Li_2SiO_3$-coated $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ was covered with island-type $Li_2SiO_3$ particles, and the coating process did not affect the structural integrity of the $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ powder. The $Li_2SiO_3$ coating improved the discharge capacity and rate capability; moreover, the $Li_2SiO_3$-coated electrodes showed reduced impedance values. The surface of the lithium-ion battery cathode is typically attacked by the HF-containing electrolyte, which forms an undesired surface layer that hinders the movement of lithium ions and electrons. However, the $Li_2SiO_3$ coating layer can prevent the undesired side reactions between the cathode surface and the electrolyte, thus enhancing the rate capability and discharge capacity. The thermal stability of $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ was also improved by the $Li_2SiO_3$ coating.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.386-389
• /
• 2002

It may be necessary to apply a daily fever to operate the municipal solid waste landfill. The daily cover helps to control nuisance factors such as the escape of odors, dusts and airborne emissions, and can control the population of disease vectors. Also it may be reduce the infiltration of rain, decreasing the generation of leachate and the potential for surface water and groundwater contamination. Because of its usual availability and traditional usage as the municipal solid waste landfill, soil remains as the most common daily cover material. However, soil tends to reduce the volume of dumping waste c;3pacity in the landfill, it also reduces a period of using in the landfill. Therefore, it is necessary to research about Alternative Daily Cover Materials (ADCMs) because of the limitation of landfill sites. Recently, The types of ADCMs are classified into geosynthetics, forms, spray-ons, indigenous materials. In this study, the authors have tested the spray type of Alternative Daily Cover(ADC) using by flyash, alum with cement. The development. of ADCMs will be highly effective in terms of prolongation using landfill.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.354.1-354.1
• /
• 2016

Nanoporous gold (NPG) is a very promising material in various fields such as sensor, actuator, and catalysis because of its high surface to volume ratio and conducting nature. In this study, we fabricated a NPG based amperometric sensor on a glass substrate by means of co-sputtering of Au and Si. During the sputtering process, we found the optimum conditions for heat treatment to reduce the residual stress and to improve adhesion between NPG films and the glass substrate. Subsequently, Si was selectively etched from Au-Si alloy by KOH solution, which forms nanoporous structures. Scanning electron microscopy (SEM) and auger electron spectroscopy (AES) were used to estimate the structure of NPG films and their composition. By employing appropriate heat treatments, we could make very stable NPG films. We tested the performance of NPG sensor with aniline molecules, which shows high sensitivity for sensing low concentration of aniline.