• 제목/요약/키워드: Supporting Structure

검색결과 1,079건 처리시간 0.034초

고유진동수를 고려한 박판 구조물의 보강재 최적설계 (Optimization of Reinforcement of Thin-Walled Structures for a Natural Frequency)

  • 임오강;정승환;최은호;김대우
    • 한국전산구조공학회논문집
    • /
    • 제19권2호
    • /
    • pp.195-202
    • /
    • 2006
  • 박판 구조물은 자동차를 비롯하여 항공기, 인공위성, 선박 등의 운송 수단과 건축물의 돔과 같이 효율적으로 활용되어지고 있으며 동시에 경량화를 필요로 하는 경우 널리 사용되는 구조물이다. 엔진, 변속기 등의 회전체의 부품을 보호하는 박판 구조물인 자동차 후드에서의 새로운 보강재 형상을 제시하였다. 자동차 후드는 엔진 룸에 장착되어 있는 회전체의 진동 영향을 민감하게 받아 공진현상이 발생할 우려가 있다. 따라서 설계하중을 지지할 강성을 가지며 동적 특성이 고려되어야 한다. 즉, 강성을 유지하면서 공진에 의한 진동도 고려해야 한다. 이는 곧 승차감과 직결된 중요한 문제이다. 그러므로 최적의 강성증대 설계결과를 얻기 위해서는 정적 동적 강성평가와 함께 고유진동수를 고려한 보강재의 최적설계가 도입되어야 한다. 본 연구에서는 고유진동수를 고려한 대표적인 박판 구조물인 자동차 후드의 보강재 위상을 구하고, 도출된 위상에서 보강재의 형상 최적 설계 후 제시된 보강재 단면의 최적 치수를 다구찌 방법을 이용한 직교 배열표상에서의 각 설계변수의 수준과 최적의 설계변수의 조건으로 구하였다.

모듈러 도로시스템의 동결-융해에 대한 수치해석적 연구 (Numerical Study on Freezing and Thawing Process in Modular Road System)

  • 신호성;김진욱;이장근;김동규
    • 한국지반공학회논문집
    • /
    • 제33권3호
    • /
    • pp.49-62
    • /
    • 2017
  • 지반의 동결-융해 과정에 의한 지반구조물의 거동 특성을 이해하기 위해서는 지반내 간극수의 상변화와 지반과 구조물의 상호작용에 대한 이해가 필요하다. 본 연구에서는 모듈러 도로시스템의 동결융해의 영향에 대한 수치해석적 연구를 수행하였다. Neumann의 동결-융해 이론식을 이용하여 기본 지반 물성치와 지중과 지표면의 온도조건에 대한 동결심도와 히빙량을 예측할 수 있으나, 지반의 완전포화 및 완전동결의 제한된 경우에만 적용할 수 있다. 동결지수에 따른 모듈러 도로시스템의 수치해석은 다양한 지반조건과 지하수위에 대하여 수행되었다. 동결 히빙량은 화강풍화토이나 모래지반에 비하여 실트질 지반에서 매우 크게 발생하였으며, 지하수위의 저하는 동결 히빙량을 감소시켰다. 실트질 지반에 설치된 도로시스템의 온도이력에 대한 수치해석은 지표면의 동결-융해 과정을 거치면서 지표면에 잔류히빙을 예측하였다. 이는 지반의 강성과 지지력을 급격하게 감소시켜 모듈화 도로시스템의 안정성과 사용성을 저해할 수 있다. 다만, 화강풍화토와 모래지반의 경우는 잔류 히빙량은 미비한 것으로 나타났다. 모듈러 도로시스템은 기존 도로포장 시스템과 달리 지지구조 상부에 설치된 포장 구조물이므로, 포장 구조물의 균등 연직변위와 부등 변형에 대한 엄격한 기준이 적용되어야 할 것으로 사료된다.

곡선 궤적의 이동 관측점에 대한 다면체 모델의 윤곽선 추출 (Extracting Silhouettes of a Polyhedral Model from a Curved Viewpoint Trajectory)

  • 김구진;백낙훈
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제8권2호
    • /
    • pp.1-7
    • /
    • 2002
  • 컴퓨터 그래픽스 및 애니메이션에서 물체의 윤곽선 계산은 많은 응용분야에서 빈번히 사용되고 있으며, 윤곽선의 효율적인 계산 방법은 현재까지 많은 연구자들의 관심을 끌어왔다. 본 논문에서는 이동하는 관측점에 대해 다면체 모델의 투시 윤곽선을 계산하는 효율적인 알고리즘을 제시한다. 관측점이 시간에 따라 이동하는 경로는 시간을 나타내는 매개변수 t를 이용하여 곡선 q(t)로 표현한다. 다면체의 각 에지(edge)가 윤곽선에 포함되는 시간 간격 (time-interval)은 에지에 인접한 두 면의 supporting plane들과 q(t)의 교점 계산, 그리고 몇 차례의 벡터 내적을 수행함으로써 구해진다. 곡선 q(t)가 차수 n의 곡선이라면, 한 에지가 윤곽선에 포함되는 시간 간격은 최대 n + 1 개 존재할 수 있다. 미리 구해진 시간 간격들에 대해 고정된 시점 $t_i$를 포함하는 시간 간격들을 검색함으로써 관측점이 $q(t_i)$일 때 모델의 윤곽선에 포함되는 모든 에지를 구할 수 있다. 윤곽선 계산의 효율성은 시간 간격을 저장하는 자료구조 (data structure)와 밀접한 관련이 있으므로, 시간 간격을 저장하는 자료구조로서 인터벌 트리 (interval tree)의 사용을 제안한다. 또한, 제시된 알고리즘에 의해 윤곽선을 계산한 실험결과를 보인다.

  • PDF

다양한 오디오 포맷을 지원하는 비디오/오디오 시스템 구현에 관한 연구 (A study on the implementation of a digital video/audio system to support multi-audio format)

  • 박인규
    • 전자공학회논문지CI
    • /
    • 제43권4호
    • /
    • pp.123-132
    • /
    • 2006
  • 현재 가정에 널리 보급되어 있는 비디오/오디오 기기 중 비디오 레코더 플레이어는 영상 기기로 분류되고 있지만 DVD 플레이어의 경우에는 오디오 기기로 분류될 정도로 오디오의 기능과 성능을 강조하고 있다. 따라서 비디오/오디오 시스템에서 오디오 재생 기능과 성능을 높이는데 많은 연구가 이루어지고 있다. 본 논문에서는 DVD 전용 프로세서를 이용한 비디오/오디오 시스템을 구성하는데 있어서 기존에 비디오 및 오디오 데이터의 처리를 DVD 전용 프로세서가 전담하는 구조에서 발생되는 DVD 전용 프로세서의 시스템 리소스의 한계성으로 인한 기능의 제약을 개선한 오디오 기능을 분화한 비디오/오디오 시스템의 구조를 제안하고 시스템 구현을 통해 제안된 구조의 우수성을 증명한다. 본 논문에서 제안한 시스템은 오디오 기능의 분화로 여러 가지 오디오 포맷이 지원 가능할 뿐만 아니라 원음에 특수한 효과를 부여하여 재생할 수 있도록 함으로써 사용자 취향에 맞는 설정으로 오디오를 감상할 수 있도록 하였고 다양한 음장 모드를 지원하도록 하였다. 다양한 포맷의 오디오를 지원하기 위해서는 각 오디오 포맷에 맞는 디코더를 모두 채용하는 방법이 가장 좋은 방법이겠으나 이러한 방법은 시스템 구성상의 효율성이 떨어지게 된다. 따라서 오디오를 재생할 때 필요한 오디오 포맷만을 재생 가능하도록 하기 위해 오디오 데이터를 검출하고 검출된 포맷만을 지원하는 방식으로 오디오 시스템을 구현함으로써 시스템의 유연성을 개선하였다.

아버지의 영아 돌봄에 관한 문헌연구 (A Study of father's care giving in infancy)

  • 김영희
    • 부모자녀건강학회지
    • /
    • 제1권
    • /
    • pp.75-87
    • /
    • 1998
  • These days social and economical changes have influence on the structure of family and the role of family members. Working mothers and widowers with children are increasing because of economical difficulties. Support from relatives are decreasing because of the conspicuous trend toward nuclear families. According to these reasons androgynous fathers are required. Today's fathers in Korea socially and culturally have learned about traditional parenting, but they are changing their fathering styles to meet the demands of the times. However they don't have their own fathering models. Therefore nurses who hold an advantageous position to teach and support from clinic have to encourage them to care their infants. The purposes of this study were to define father's care giving in infancy, understand influencing factors on fathering, and the differences between fathering and mothering, then contribute to nursing implementation for supporting fathers. This study was designed to review references about father's care giving. The results were follows: Six aspects of parent participation were direct care. indirect care, play, decision-making concerning the child, amount of time of sole responsibility for the child and overall availability to the child. Direct care involved feeding, bathing, going to child if child awakens. dressing, putting child to bed, taking child to doctor, nurse, or dentist, transporting child to and from sitter, day care, or school, washing child's hair. Indirect care involved cleaning up after child, preparing child's food, fixing child's broken playthings, washing child's clothes, arranging baby-sitting, shopping for child's toys and clothes, transporting baby-sitter to and from your home. Young fathers were gradually participating in direct care like feeding, taking child to doctor. Father's care giving stimulated mothering and promoted parent-infant relationship. Influencing factors of fathering would be divided into father characteristics, surrounding factors, infant attributes. Father characteristics were age, role perception, relationship with parent. Surrounding factors were the opportunity of early contact, support system, spouse's expectation, marital adjustment, feeding type, past experience of care giving. Infant attributes were temperament, behavior, age, sex. The differences between fathering and mothering were reviewed. Fathers were poor at care giving. but their caring was similar to mother's. This subtle difference positively worked upon infant's growth and development. On the basis of these theoretical data, nurses can empower fathers to cooperate with mothers in caring infants.

  • PDF

인공지능 비즈니스 생태계 연구 (A Study on AI Business Ecosystem)

  • 유순덕
    • 한국인터넷방송통신학회논문지
    • /
    • 제20권2호
    • /
    • pp.21-27
    • /
    • 2020
  • 본 연구의 목적은 인공지능 기술 발달과 관련 산업 발달의 기반이 되는 생태계 구조에 대해 조사하는 것이다. 또한, 인공지능 기술을 기반한 인공지능 비즈니스 생태계에 대해 연구하고 활성화 방안에 대하여 고찰하였다. 생태계는 생산자, 소비자, 분해자들이 유기적으로 연관되어 역할을 수행한다. 인공지능 생태계에서 생산자인 인공지능 서비스 생산자, 생산된 서비스를 이용하는 인공지능 서비스 소비자, 인공지능 서비스의 기반이 되는 데이터 및 관련 인프라 서비스를 분해자로 분류하였다. 또한 인공지능 비즈니스 생태계에 등장하는 이해관계자는 인공지능 서비스 생산, 소비, 운영에 직간접적으로 영향을 주는 요인이 이해관계자로서 정부 및 각종 관련 민간단체 들이 있다. 특히 국내의 경우 정부가 가장 영향력 있는 이해관계자로서 역할을 수행하고 있다. 대표적인 사례로 관련 인력양성 지원인 생산자 증가에 기여하고, R&D 자금 지원으로 생산되는 서비스의 증가에 촉매제 역할을 담당하고 있다. 본 연구에서 인공지능 비즈니스 생태계의 활성화를 위한 정책은 (1) 생산자 증대 환경 확보, (2) 소비자의 인공지능 인식 확산, (3) 데이터 교류 및 공급 인프라 확보, (4) 관련 서비스 지원 법 및 관련 제도 확보이다. 본 연구는 국내의 인공지능 기반 환경 구축 및 관련 연구에 기여 및 활용되는 것에 의의를 가진다.

비수용매에서 이핵성 네자리 Schiff Base Cobalt(II), Nickel(II) 및 Copper(II) 착물들의 전기화학적 성질 (제 5 보) (Electrochemical Properties of Binuclear Tetradentate Schiff Base Cobalt(II), Nickel(II) and Copper(II) Complexes in Nonaqueous Solvents. (V))

  • 조기형;최용국;이송주;김찬영;임채평
    • 대한화학회지
    • /
    • 제36권5호
    • /
    • pp.709-719
    • /
    • 1992
  • 이핵성 네자리 Schiff base 의 cobalt(II), nickel(II) 및 copper(II) 착물인 [Co(II)_2(TSBP)(L)_4], [Ni(II)_2(TSBP)(L)_4] 및 [Cu(II)_2(TSBP)] (TSBP: 3,3',4,4'-tetra(salicylideneimino)-1,1'-biphenyl, L: Py, DMSO 및 DMF)들을 합성하여 원소분석, IR-spectrum, UV-visible spectrum, T.G.A. 및 D.S.C.를 측정하여 이핵성 착물로 주어짐을 확인하였다. 지지전해질로서 0.1M TEAP-L (L; Py, DMSO 및 DMF)에서 1mM-착물용액의 순환전압-전류법과 D.P.P.법으로 전기화학적 성질을 측정한 결과 이핵성 cobalt(II) 착물은 일전자의 확산 지배적인 네단계의 산화-환원과정이 Co(III)_2 {^\longrightarrow \\_\longleftarrow^e^-}Co(III)Co(II)_2{^\longrightarrow \\_\longleftarrow^e^-}Co(II){^\longrightarrow \\_\longleftarrow^e^-}Co(I){^\longrightarrow \\_\longleftarrow^e^-}Co(I)_2 으로 일어나고 이핵성 nickel(II) 및 copper(II) 착물들은 일전자의 확산지배적인 두 단계의 산화-환원과정이 M(II)_2 {^\longrightarrow \\_\longleftarrow^e^-}M(I)M(I){^\longrightarrow \\_\longleftarrow^e^-}M(I)_2 (M; Ni 및 Cu)으로 일어남을 알았다.

  • PDF

3차원 유한요소 해석을 통한 압전에너지 도로의 장기 공용성 예측 (Long-term Performance Prediction of Piezoelectric Energy Harvesting Road Using a 3-Dimensional Finite Element Method)

  • 김현욱;남정희;최지영
    • 한국도로학회논문집
    • /
    • 제19권5호
    • /
    • pp.107-115
    • /
    • 2017
  • PURPOSES : The piezoelectric energy road analysis technology using a three-dimensional finite element method was developed to investigate pavement behaviors when piezoelectric energy harvesters and a new polyurethane surface layer were installed in field conditions. The main purpose of this study is to predict the long-term performance of the piezoelectric energy road through the proposed analytical steps. METHODS : To predict the stresses and strains of the piezoelectric energy road, the developed energy harvesters were embedded into the polyurethane surface layer (50 mm from the top surface). The typical type of triaxial dump truck loading was applied to the top of each energy harvester. In this paper, a general purpose finite element analysis program called ABAQUS was used and it was assumed that a harvester is installed in the cross section of a typical asphalt pavement structure. RESULTS : The maximum tensile stress of the polyurethane surface layer in the initial fatigue model occurred up to 0.035 MPa in the transverse direction when the truck tire load was loaded on the top of each harvester. The maximum tensile stresses were 0.025 MPa in the intermediate fatigue model and 0.013 MPa in the final fatigue model, which were 72% and 37% lower than that of the initial stage model, respectively. CONCLUSIONS : The main critical damage locations can be estimated between the base layer and the surface layer. If the crack propagates, bottom-up cracking from the base layer is the main cracking pattern where the tensile stress is higher than in other locations. It is also considered that the possibility of cracking in the top-down direction at the edge of energy harvester is more likely to occur because the material strength of the energy harvester is much higher and plays a role in the supporting points. In terms of long-term performance, all tensile stresses in the energy harvester and polyurethane layer are less than 1% of the maximum tensile strength and the possibility of fatigue damage was very low. Since the harvester is embedded in the surface layer of the polyurethane, which has higher tensile strength and toughness, it can assure a good, long-term performance.

한국동해 남부해역의 일차생산계 I. 생물량과 생산력 (Primary Production System in the Southern Waters of the East Sea, Korea I. Biomass and Productivity)

  • 심재형;여환구;박종규
    • 한국해양학회지
    • /
    • 제27권2호
    • /
    • pp.91-100
    • /
    • 1992
  • 한국 동해 남부해역 일차생산계의 구조와 특성을 밝히기 위해 엽록소량, 식물플랑 크톤 현존량, 영양염 및 수리적 성분들을 C-14 방법에 의한 일차생산력 측정과 병행하 여 조사, 분석하였다. 그 결과 본는 구해역 일차생산력은 기존의 연구들에서 보다 높 은 284 - 4.574 mgC·m/SUP -2/·day/SUP -1/의 범위로 측정되었으며 평균값은 2,000 mgC·m/SUP -2/·day/SUP -1/로 계산되었다. 진광대 내의 일차생산자 현존량은 비교적 컸으나 해수중 무기 질소태 영양염은 높은 일차생산을 유지시키기는 어려운 낮은 농도 로 측정되었다. 따라서 질소태 영양염은 종속영양 생물과정과 수층의 수직혼합에 의한 상층으로의 유입에 의해 빠른 순환 공급이 예상된다. 표층하 엽록소량 최대 현상은 진 광대의 기저부에서 계속적으로 관찰되었으며 그 깊이는 등밀도 표면대 보다는 영양염 약층과 더 밀접한 관계를 보여 엽록소량 분포와 일차생산이 일차적으로 영양염 공급에 영향받는 것으로 보인다. 따라서 본 연구해역은 낮은 영양염 농도에서 불구하고 식물 플랑크톤 현존량과 생산량은 비교적 크고 자가영양 미소 및 초미소플랑크톤의 생산량 이 중요하였다.

  • PDF

학교보건수업에 대한 양호교사의 태도 및 교수능력의 인식도에 관한 조사연구 -서울시 중학교 양호교사를 중심으로- (A Study on Teaching Competence and Attitudes of School Nurses for Health Education)

  • 김재희
    • 한국학교보건학회지
    • /
    • 제10권1호
    • /
    • pp.41-50
    • /
    • 1997
  • The purpose of this study is to provide fundamental data supporting facilitation of a formal health education performed by school nurses as health educators. To evaluate the teacher expertise of school nurses as health educators, this study analyzed the present status of health education and the recognition of self-confidence in teaching ability of school nurses. Self addressing questionnaire were mailed out to 340 secondary school nurses in Seoul and out of them 244 nurses (71.8%) responded to the survey. Analysis of the data was made using t-test and ANOVA in SAS program. The major results are as follows : 1. The total health instruction performance rate was 84.6% (204). Regular health instruction was carried out by 66 nurses and the rest of the 155 subjects gave irregular instruction on health education. 2. Regular health education classes was offered as a part of physical education class hour by 89.4% of the respondents whereas only 10.6% of them had formal health education classes. The survey showed that irregular health education classes were mainly held in physical education class hours (70.3%) and 14.8% had opportunities for additional classes on health education. 3. The average class for regular health education was 5 hours per week but for irregular health education classes were only one hour per semester (32.9%). 4. Among the 11 categories of health education, education on drug abuse and body structure and function and physical development occupied 95.6%, 69.6% respectably while physical training, family health, social health occupied 10.8%, 12.7%. 5. Health education was given much more at public schools (88.2%) than at private schools. 6. 232 (95.0%) school nurses agreed with the necessity of formalizing health education classes and 227 (93.1%) wanted to change their status from school nurses to formal health teachers. 7. There is a tendency to change the status from school nurse to formal health teacher, and the necessity of having a formal curriculum on health education while less recognized by the older and longer-careered nurses was more recognized by those nurses with higher education. 8. The lack of administrative support (79.5%), work burden (77.9%), and lack of teaching competency (22.1%) were the greatest problems. 9. Education on drug abuse was stressed the most whereas physical training was most neglected. 10. There is a tendency that older and longer-careered school nurses thought less positively of their status, and then 98 (81.1%) school nurses acknowledged themselves as professional teachers. 11. 176 (72.5%) school nurses agreed with the necessity of continuing education : health knowledge and teaching skills for formal health teachers. 12. 179 (73.8%) school nurses had a positive attitude and undergraduate preparation and the practice of professional health teachers. 13. The school nurses had self-confidence in their teaching competence, teaching strategies and knowledge in all 11 health education areas.

  • PDF