• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.140-146
• /
• 2017

It is laser induced breakdown spectroscopy(LIBS) that enables qualitative and quantitative analysis of the elements contained in unknown specimen by comparing the wavelength characteristics of each element obtained from the spectral analysis of the standard specimen with the wavelength analysis results from unknown specimens. In this study, the applicability of LIBS to the analysis of major deterioration factors affecting concrete durability was experimentally analyzed. That is, the possibility of applying LIBS to the diagnosis of concrete deterioration by studying the quantitative detection of harmful deteriorating factors on chloride, sulfate and carbonated mortar specimens using LIBS was studied. As a result of LIBS test for each chloride and sulfate specimen, the LIBS spectral wavelength intensity of chlorine and sulfur ions increased linearly with increasing concentration. Carbon ion LIBS spectral wave intensities of carbonated specimens increased nonlinearly over the duration of carbonation exposure. From the above results, it can be partially confirmed that LIBS can be applied to the diagnosis of concrete deterioration. In case of concrete carbonation, it is presumed that carbon content is contained in the cement itself and is different from the detection of chloride and sulfate specimen. Therefore, it is considered that more various parameter studies should be performed to apply LIBS to concrete carbonation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.1 s.28
• /
• pp.93-102
• /
• 2007

Particle materials sink in bottom and dissolved inorganic substances release from sediment and many kinds of materials continuously exchange in sediment and water column as well as transfer and transformation in sediment. The study of sediment quality means the state of sediment pollution relation of the water quality, sediment biota, materials fluxes between sediment and water column, transformation of materials in sediment is being important in recent. The state of sediment quality imply that the history of water pollution for long time, because the sediment quality does not change temporally. The sediment quality of bottom water can be used as a good indicator of pollution at present and in future. The major index of sediment qualities are the content of nutrients and hazard materials such as metals, Ignition Loss (IL), Total Sulfur (TS), Oxidation Reduction Potential (ORP), sediment COD, color, odor and the release of nutrients from sediment. However, there are some arguments between researchers about compare to estimation of sediment quality and sampling and analysis of sediment. In this study, I will introduce the method of sediment sampling, analyzing and estimating of the sediment pollution.

• Korean Journal of Food Science and Technology
• /
• v.8 no.3
• /
• pp.129-135
• /
• 1976

The amino acid compositions of polished barley grain were investigated for 16 varieties by using amino acid autoanalyzer and simple correlation analysis between them and between protein and amino acid per protein was done. 1) Limiting amino acid is lysine, leucine and phenylalanine are high but threonine and tyrosine are low. Total essential amino acids is high. 2) Protein is significantly correlated negatively with lysine arginine, total basic amino acids (at p=0.01) and threonine, alanine, aspartic acid (at p=0.05) and positively with phenylalanine (at p=0.01) proline and cystine (at p=0.05). 3) Lysine is positively and significantly correlated with arginine and aspartic acid indicating that aspartic acid is probable precursor of lysine and that high yielding varieties or fertilization for high yielding decrease aspartic acid pool resulting low lysine. 4) Lysine content is positively correlated with dye binding capacity (at p=0.01). 5) Tryptophan is positively (at p=0.01) and significantly correlated with histidine, total basic amino acids and arginine. 6) In essential amino acids lysine, tryptophan, threonine and valine simultaneously increase or decrease while aromatic amino acids, sulfur contained amino acids, isoleucine and leucine do so together.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.310-315
• /
• 2019

This study conducted a series of studies to find alternative ways to use Chlorine Bypass System-dust(CBS-dust) in cement production. The results of engineering characteristics of CBS-dust are summarized as follows. First of all, the density of CBS-dust is 2.40, lighter than cement and the pH was 12.50 which was strong alkaline. In terms of particle size, it was 11.70 ㎛ which was finer than cement. With chemical properties, calcium oxide(CaO) was the highest as 35.10%, potassium oxide(K₂O) was 32.43%, potassium chloride(KCl) was 19.46%, sulfur oxide(SO₃) was 6.81%, and the remaining chemical components are SiO₂, Fe₂O₃, Al₂O₃, MgO, and the like. Therefore, if CBS-dust is used as early-strength chemical admixtures in the concrete secondary products that use a large amount of mineral admixtures without rebar, it can be an effective method for increasing the strength of concrete as an alkali activator and preventing early-frost damage of Cold Weather Concrete.

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.109-114
• /
• 1975

Domestic seaweeds Gracilaria verrucosa collected from coastal areas of Namhae, Wando and Yeosoo, Korea were subjected to the examination of yield and quality of agar prepared according to various pretreatment conditions. In alkali treatment at high temperature, higher alkali concentration for one-hour period at $90^{\circ}C$ gave rise to higher yield of agar. In acid treatment, higher yield was obtained by higher acid concentration and longer treating period. Alkali treatment at room temperature gave rise to a slightly decreased yield at higher alkali concentration and longer treating time. Total nitrogen and crude ash of agar samples were greatly decreased by pretreatments. Jelly strength, gelation ability, gelation point and viscosity of agar samples tended to increase as the alkali-treating condition of seaweed became stronger. It was shown that sulfur content of agar had a high negative correlation with jelly strength of its gel. Various alkali treatments of seaweed at room temperature showed no marked difference in agar quality and did not exhibit any good effect comparable to alkali treatment at high temperature.

• Journal of Food Hygiene and Safety
• /
• v.3 no.4
• /
• pp.233-239
• /
• 1988

Vegetable mixed codiments, commercial products prepared using soybean,paste and natto, respectively as the ingredients, were used ina study to evaluate the efficacy of gamma irradiationas a means of decontamination and the emphasis was placed upon the determination of the effect of irradiation on the microbiological and some physicochemical properties of the samples. The number of microorganisms contaminated ranged from $10^{6}\;to\;10^{7}$ cells per gram in mesophilic total bacteria, which were composed of thermophilts and acid tolerant bacteria by over 90%. They were reduced by 3 to 4 log cycles with irradiation at 10 kGy. Gamma irradiation at 5 kGy could eliminate the microbial populations of yeasts and molds ($10^{2}\;to\;10^{3}$ cells per gram) and coliforms ($10^{6}\;to\;10^{6}$ cells per gram of natto condiments). However, total destruction of microorganisms in soybean-paste and natto condiments was shown to be possible at a dose-range more than 10 kGy. Irradiationup to 10 kGy was not detrimental to the physicochemical properties of the sample, such as pH. amino nitrogen, rancidity and color, even though some change was brought about in the content of sulfur-containing amino acids.

• Clean Technology
• /
• v.24 no.4
• /
• pp.323-331
• /
• 2018

The results of an experimental investigation on the co-firing characteristics and slagging behavior of dried and hydrothermal carbonization sewage sludge, sub-bituminous coal, and wood pellet in a fluidized bed were presented. Combustion tests were conducted in a lab-scale bubbling fluidized bed system at the uniform fuel-air equivalence ratio, air flow rate, and initial bed temperature to measure bed temperature distribution and combustion gas composition. 4 different fuel blending cases were prepared by mixing sewage sludge fuels with coal and wood pellet with the ratio of 50 : 50 by the heating value. $NO_x$ was mostly NO than $NO_2$ and measured in the range of 400 to 600 ppm in all cases. $SO_2$ was considered to be affected mostly by the sulfur content of the sewage sludge fuels. The cases of hydrothermal carbonization sewage sludge mixture showed slightly less $SO_2$ emission but higher fuel-N conversion than the dried sewage sludge mixing cases. The result of fly ash composition analysis implied that the sewage sludge fuels would increase the possibility of slagging/fouling considering the contents of alkali species, such as Na, K, P. Between the two different sewage sludge fuels, dried sewage sludge fuel was expected to have the more severe impact on slagging/fouling behavior than hydrothermal carbonization sewage sludge fuel.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.224-233
• /
• 2018

Thirty-three Early Iron Age bronzes at the sites of Hoam-dong in Chungju and Cheongsong-ri in Buyeo were investigated in order to study the manufacturing technique and the provenance of lead. Chemical analysis using X-ray fluorescence showed that 33 bronzes consist of copper(Cu), tin(Sn) and lead(Pb) served as major elements. Major and minor elemental analyses by EPMA were performed on two mirrors and 2 weapons of the bronzes investigated. The results shows that bronze mirrors from Chungju and Buyeo were high-tin bronzes(> 30 wt%). And 20% of tin and 5% of lead were founded in bronze weapons. Iron, zinc, arsenic, silver, nickel, sulfur and cobalt detected in four bronzes as minor and trace elements. The four bronzes were alloyed considering their function and were not heat treated after casting due to their high tin content. Lead isotope analysis using TIMS indicates that thirty-three bronzes were distributed southern Korea peninsula except Zone 1. As a result, lead raw materials came from various regions in Korean Peninsula not from Gyeongsang-do regions. The manufacturing techniques of bronze ware generalized at this age, and bronze was produced in various sites using raw materials from various sources.

• Korean Journal of Microbiology
• /
• v.55 no.3
• /
• pp.309-312
• /
• 2019

Comamonas sp. NLF-7-7 was isolated from biofilter of wastewater treatment plant. The whole-genome sequence of Comamonas sp. NLF-7-7 was analyzed using the PacBio RS II and Illumina HiSeqXten platform. The genome comprises a 3,333,437 bp chromosome with a G + C content of 68.04%, 3,197 total genes, 9 rRNA genes, and 49 tRNA genes. This genome contained pollutants degradation and floc forming genes such as sulfur oxidization pathway (SoxY, SoxZ, SoxA, and SoxB) and floc forming pathway (EpsG, EpsE, EpsF, EpsG, EpsL, and glycosyltransferase), respectively. The Comamonas sp. NLF-7-7 can be used to the purification of wastewater.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.670-682
• /
• 2018

Engineered nanomaterials (ENMs) can be released to humans and the environment through the generation of waste containing engineered nanomaterials (WCNMs) and the use and disposal of nano-products. Nanoparticles can also be introduced intentionally or unintentionally into waste streams. This study examined WCNMs in domestic industries, and target nanomaterials, such as silicon dioxide, titanium oxide, zinc oxide, nano silver, and carbon nanotubes (CNTs), were selected. We tested 48 samples, such as dust, sludge, ash, and by-products from manufacturing facilities and waste treatment facilities. We analyzed leaching and content concentrations for heavy metals and hazardous constituents of the waste. Chemical compositions were also measured by XRD and XRF, and the unique properties of nano-waste were identified by using a particle size distribution analyzer and TEM. The dust and sludge generated from manufacturing facilities and the use of nanomaterials showed higher concentrations of metals such as lead, arsenic, chromium, barium, and zinc. Oiled cloths from facilities using nano silver revealed high concentrations of copper, and the leaching concentrations of copper and lead in fly ash were higher than those in bottom ash. In XRF measurements at the facilities, we detected compounds such as silicon dioxide, sulfur trioxide, calcium oxide, titanium dioxide, and zinc oxide. We found several chemicals such as calcium oxide and silicon dioxide in the bottom ash of waste incinerators.