• 한국의상디자인학회지
• /
• 제12권4호
• /
• pp.207-221
• /
• 2010

This study aim to suggest how alter the korean traditional image design for umbrellas by sublimation transfer digital textile printing. Umbrellas are highly depend on design and made from polyester fiber which is proper item to utilize sublimation transfer digital textile printing. Sublimation transfer digital textile printing system can use computer system to create the delicate high dense images and one full layout through the hole umbrella. It can create distinctive style of design compare with former screen printing umbrella design. As a result of this study, Korean traditional images were adopted and recreated for umbrellas as the modern practical item. 7 of umbrella designs were developed and sample umbrellas could be produced in short period comparing with screen printing process. Through this study, as green printing process, sublimation transfer digital textile printing will be more applied to manufacture high quality textile products along with design development, thus it is expected as an alternative plan to leads growth of umbrella industries.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2550-2552
• /
• 1998

The stiction phenomena poses a design constraint in surface micromachining by reducing the releasable size of the microstructure. This problem occurs during the fabrication process of surface micromachined microstructures during the wet etch of sacrificial layers. For the prevention of the sticking problem, the microsctructure is released by sublimation after the substitution of the sacrificial layer etchant with a sublimation material heated above its melting temperature. In the sublimation drying method, the sublimation materials such as p-dichlorobenzene, t-butyl alcohol, and cyclohexane are used. In this paper, a method for designing a sublimation drying system is developed, and its performance is experimentally evaluated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.138.1-138.1
• /
• 2013

We present the low temperature (${\leq}1,000^{\circ}C$) vacuum sublimation behavior of an e-beam evaporative deposited on a SiC film and a method to reduce the vacuum sublimation through an ion beam process. The density of the SiC film deposited using the e-beam evaporation method was ~60% of the density of the bulk source material. We found that the sublimation became appreciable above ${\sim}750^{\circ}C$ under $1.5{\times}10^{-5}$ torr pressure and the sublimation rate increased with an increase in temperature, reaching ~70 nm/h at $950^{\circ}C$ when the coated sample was heated for 5 h. When the film was irradiated with 70 keV N+ ions prior to heating, the sublimation rate decreased to ~23 nm/h at a fluence of $1{\times}10^{17}\;ions/cm^2$. However, a further increase in fluence beyond this value or an extended heating period did not change (decrease or increase) the sublimation rate any further.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.981-992
• /
• 2004

Freeze drying under vacuum condition is a complex process that involves simultaneous heat and mass transfer, sublimation of ice, and motion of sublimation front. Proper treatment of the motion of sublimation interface is crucial for an accurate prediction of the freeze drying process. Based on the enthalpy formulation that has been successfully used in liquid/solid phase change problems. a fixed grid method. streamlined for the freeze drying analysis. was developed in this study. The accuracy of the fixed grid method was checked by solving a one-dimensional tray freeze drying and a two-dimensional vial freeze drying problem and then comparing the results with those by the moving grid method. Finally. the freeze drying characteristics of two-dimensional slab and axis-symmetric cylinder was investigated using the fixed grid method.

• 한국결정성장학회지
• /
• 제18권2호
• /
• pp.68-71
• /
• 2008

승화법에 의하여 AlN 결정을 성장하였다. 성장된 결정의 상은 미세한 단결정상이 응집된 다결정상이었으며, 약 2${\sim}$3mm의 길이와 직경 1인치의 크기로 증착되어진 성상을 얻었다. 성장된 결정의 표면에 탄소의 흡착이 관찰되었으며, 광학현미경과 SEM을 통하여 AlN 결정의 성장 거동에 대하여 고찰하여 보았다.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.242-245
• /
• 2009

종자결정을 사용하지 않고 AlN 결정을 승화법으로 성장하였으며, 결정이 성장되는 양상을 고찰하였다. AlN 결정으로 성장된 상은 다결정 상이었으며, 약 $60\sim160\;{\mu}m$의 크기를 가졌으며, $0.2\sim0.5\;{\mu}m/hr$의 성장 속도로 성장되었다. 성장된 결정구조는 AlN 결정의 결정 구조가 반영된 육방정계의 결정상으로 성장되었음을 관찰하였으며, 주상 구조(columnar structure)로 성장된 후 횡적 성장(lateral growth)하는 양상을 보이면서 대형화됨을 알 수 있었다. 성장된 결정의 표면에서는 다량의 pinhole이 관찰되었으며, 광학현미경과 SEM을 이용하여 성장 morphology의 변화과정을 고찰하였다.

• 한국결정성장학회지
• /
• 제27권3호
• /
• pp.105-109
• /
• 2017

고주파 유도 가열 장치를 이용하여 승화법으로 성장된 AlN 단결정을 질소 분위기 하에서 $1200^{\circ}C$와 $1500^{\circ}C$에서 열처리하였다. 열처리 후 단결정 시편들의 표면을 광학현미경으로 관찰하였으며, DCXRD(Double crystal X-ray Diffractometry)를 이용하여 FWHM(Full width of half maximum) 값을 측정하여 결정성의 변화를 평가하였다.

• 한국식품과학회지
• /
• 제25권4호
• /
• pp.313-320
• /
• 1993

동결건조에서 승화 건조시간을 예측하기 위하여 수학적 모델링과 지배방정식을 설정하고, 당근즙을 대상으로 수치계산하여 실험값과 비교한 바, 수분함량이 많은 동결건조품에서 단위면적당 승화량을 높일 수 있는 재료의 두께는 전도 열전달 방식에서 5mm이었으며, 양면 복사방식에서는 10mm이었다. 또한 동일한 압력에서 응축기 온도가 낮을수록 당근즙의 승화시간은 짧았고, 압력이 높을수록 승화시간은 선형적으로 증가하였다. 그리고 동결건조 효율이 가장 좋은 열전달 방법으로는 전도 및 복사방식으로 상, 하의 플레이트 온도를 $T_x{\leq}T_m$와 $T_m{\leq}T_x$의 제한 조건하에서도 별도 제어하는 방식이었다.

• 한국표면공학회지
• /
• 제46권4호
• /
• pp.168-174
• /
• 2013

In this study, low-cost, high-speed deposition, excellent processability, high mechanical strength and electrical conductivity, chemical stability and corrosion resistance of stainless steel to meet the obsessive-compulsive (0.1 mm or less) were selected CrN thin film. new price reduction to sputter deposition causes - the possibility of sublimation source for inductively coupled plasma Cr rods were attempts by DC bias. 0.6 Pa Ar inductively coupled plasmas of 2.4 MHz, 500 W, keeping Cr Rod DC bias power 30 W (900 V, 0.02 A) is applied, $N_2$ flow rate of 0.5, 1.0, 1.5 sccm by varying the characteristics of were analyzed. $N_2$ flow rate increases, decreases and $Cr_2N$, CrN was found to increase. In addition to corrosion resistance and contact resistance, corrosion resistance, electrical conductivity was evaluated. corrosion current density than $N_2$ 0 sccm was sure to rise in all, $N_2$ 1 sccm at $4.390{\times}10^{-7}$ (at 0.6 V) $A{\cdot}cm^{-2}$, respectively. electrical conductivity process results when $N_2$ 1 sccm 28.8 $m{\Omega}/cm^2$ with the lowest value of the contact resistance was confirmed that came out. The OES (SQ-2000) and QMS (CPM-300) using a reactive deposition process to add $N_2$ to maintain a uniform deposition rate was confirmed that.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.518-522
• /
• 2003

We fabricated polymeric hollow spheres having macropores, which combine the advantageous properties of porous materials and hollow spheres. To fabricate such spheres, a polystyrene/methylmethacrylate solution was dispersed in water by vigorously stirring and then the suspension was quenched using liquid nitrogen. Water and methyl methacrylate present in the quenched suspension were readily sublimated by freeze-drying. Conclusively, the hollow-sphere structure and the macropores of its shell were created by the processes of liquid nitrogen-quenching and sublimation of methyl methacrylate domains within the shell, respectively.