• Title/Summary/Keyword: Study Type Test

Search Result 8,978, Processing Time 0.034 seconds

Constitutive Model of Tendon Responses to Multiple Cyclic Demands(I) -Experimental Analysis-

  • Chun, Keyoung-Jin;Robert P. Hubbard
    • Journal of Mechanical Science and Technology
    • /
    • v.15 no.7
    • /
    • pp.1002-1012
    • /
    • 2001
  • The work reported here is an extensive study of tendon response to multiple cyclic tests including 3% constant peak strain level test (A-type test), 3% constant peak strain level test with two rest periods (B-type test), and 3∼4% different peak strain level test (C-type test). A sufficient number of specimens were tested at each type of the test to statistically evaluate many changes in response during testing and differences in response between each type of the test. In cyclic tests, there were decreses (relaxations) in the peak stresses and hysteresis, increases in the slack strains, and during lower peak strain level (3%) cyclic block after higher peak strain level (4%) cyclic block in the C-type tests. Considering the results of this study and those of the other study of multiple cyclic tests with rest periods by Hubbard and Chun, 1985, recovery phenomena during the rest periods occurred predominantly at the beginning of the rest periods. Consistently in both studies, the effects of rest periods were small and transient compared to the effects of the cyclic extensions. The recovery with cycles at lower peak strain level (3%) after higher peak strain level (4%) in the C-type test has not been previously documented. This recovery seems to be a natural phenomena in tissue behavior so that collagenous structures recover during periods of decreased demand.

  • PDF

Engineering Characteristics of Horizontal Drainage for Stabilization of Dredged Fill (준설매립지반의 안정처리를 위한 수평배수재의 공학적 특성)

  • 이상호;박정용;장연수;박정순;김수삼
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2001.03a
    • /
    • pp.563-570
    • /
    • 2001
  • In this study, the charactersistics of horizontal drains used to stabilize the dredged fill are investigated experimentally by doing tensile strength test, discharge capacity test, and filter clogging test. The types of the drains selected for the study are filament type (Tyre-E), embossed type(Type-P) and heat bonded cubic type with the thickness 10mm(Type-010) and 5mm(Type-05). The results of tensile strength and discharge capacity test show that the performance of drain Type-O10 was better than the other drains. This is caused by the fact that the lattice shape core of drain Type-O10 has strong rigidity and minimizes the loss of the sectional area of discharge with increased confining pressure. Analyzing the compatibility of filters by the results of the strength characteristics test and clogging test, the filter of filament type drain produced with polyester clothed polyamide performed well.

  • PDF

Kolmogorov-Smirnov Type Test for Change with Sample Fourier Coefficients

  • Kim, Jae-Hee
    • Journal of the Korean Statistical Society
    • /
    • v.25 no.1
    • /
    • pp.123-131
    • /
    • 1996
  • The problerm of testing for a constant mean is considered. A Kolmogorov-Smirnov type test using the sample Fourier coefficients is suggested and its asymptotic distribution is derived. A simulation study shows that the proposed test is more powerful than the cusum type test when there is more than one change-point or there is a cyclic change.

  • PDF

Relation of personality preference, and achievement goal orientation, academic self-efficacy, test anxiety in selecting dental hygiene students (일부 치위생과 학생의 성격선호지표와 성취목표, 학업적 자기효능감, 시험불안의 관계)

  • Lim, Soon-Ryun
    • Journal of Korean society of Dental Hygiene
    • /
    • v.10 no.6
    • /
    • pp.1025-1035
    • /
    • 2010
  • Objectives : The purpose of this study was to identify correlation of personality preference, and achievement goal orientation, academic self-efficacy, test anxiety in selecting college students who majored in dental hygiene. This study also provides a basic data regarding personality for education of dental hygiene students. Methods : 192 students of S college who majored in dental hygiene were asked to answer the MBTI GS form, academic self-efficacy scale, achievement goal orientation scale and test anxiety scale during the month of May, 2009. The total of 160 copies were analyzed. MANOVA, independent-sample t-test were conducted. Results : 1. Looking at distribution of personality preference type of the students, extroversion type (63.1%) was more than introversion type(36.9%), sensing type(87.5%) was more than intuition type(12.5%), thinking type(54.4%) was more than feeling type(45.6%), judging type(59.4%) was more than perceiving type (40.6%) 2. In subscale of achievement goal orientation, performance approach level was higher in extroversion type than in introversion type. Performance avoidance level was lower in extroversion type than in introversion type. However, other preference personality type didn't show any significant difference in subscale of achievement goal orientation. 3. Academic self-efficacy was higher in extroversion type and thinking type than in introversion type and feeling type. There wasn't any significant difference between judging type and perceiving type, sensing type and intuition type. 4. In subscale of academic self-efficacy, confidence was higher in extroversion type than in introversion type. Task difficulty preference and self-regulated efficacy were higher in thinking type than in feeling type. 5. There wasn't any significant difference between personality preference type and test anxiety. Conclusions : Professor should find out difference between students through using information of preference personality and develop a teaching strategy that can encourage strength and make up weakness of each students.

A Study of the Opacity Correlation Factor between the Filtration Type and Light Extinction Type Diesel Smoke Meters (여지반사식과 광투과식 매연측정기의 매연도 상관계수에 관한 연구)

  • Kim, Young-Ju;Park, Kyoung-Seok
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.15 no.5
    • /
    • pp.146-152
    • /
    • 2007
  • Recently, The air pollution problems become hot issues as the production of the diesel automotive increases. The ministry of environment has enforced a precise inspection law to decrease the vehicle emission. In this circumstances, the smoke measurement is somewhat complicated by the use of the different type smoke meters. Although the paper filtration type opacimeter has been used for measuring smoke widely but currently the light extinction type is being used for precise inspection law. These two type opacimeters are different in their measuring principles on each other. So, for the time being the regulation standards can be confused by these two type opacimeters. In this article, The correlation factor between these two type opacimeters is studied by using engine dynamometer and vehicle test. The result of the dynamometer test shows the light extinction type is more sensitive than the filtration type by 1.47 times. But the relation factor by the vehicle test achieved 1.37 value, which is lower than that of the dynamometer test. In the future study the more precise research is needed to estimate the relation factor on vehicle test.

A Study on the Effect of Integrated Leakage Rate Testing of Containment Vessel due to the Type A Testing Time (격납건물 ILRT 본시험시간이 시험에 미치는 영향에 관한 연구)

  • Kim, Chang-Soo;Moon, Yong-Sig
    • Transactions of the Korean Society of Pressure Vessels and Piping
    • /
    • v.8 no.3
    • /
    • pp.1-6
    • /
    • 2012
  • The containment Integrated Leakage Rate Testing(ILRT) of nuclear power plants in Korea is performed in accordance with NSSC(Nuclear Safety and Security Commission) code 2012-16 and ANSI/ANS 56.8-1994. Nuclear power plants in Korea and the United States are to apply same test criteria, ANSI/ANS 56.8-1994, except type A testing time. NPPs in Korea apply 24 hours according to NSSC code 2012-16, but NPPs in United States apply 8 hours according to 10CFR50 App. J for type A test. So, there are many difficulties in order to perform ILRT in Korea. In this study, I review the impact on the ILRT results and the effect of ILRT due to type A testing time. The future, we will continue study to enhance the test reliability and improve these problems.

Relations between Conjugal Power and Violence according to Social Class (사회계층에 따른 부부의 권력과 폭력과의 관계)

  • 전춘애
    • Journal of the Korean Home Economics Association
    • /
    • v.27 no.3
    • /
    • pp.133-146
    • /
    • 1989
  • The purpose of this study was to investigate the differences of conjugal power type and conjugal violence level according to social class. This study was also intended to examine the relations between conjugal power type and conjugal violence level. The subjects of this study were 492 high school students in Seoul. Conjugal power was measured with used to measure the conjugal violence level. For the statistical analysis of data, x2-test, Pearson's r, F-test, Duncan's Multiple Range Test and Cronbach's α for reliability were performed. The major results of this study were summarized as follows; 1. There were significant differences according to social class in conjugal power type: The higher social class of the family, the more Syncratic Type were found. And the lower social class of the family, the more Wife Dominant Type were found. 2. There were significant differences according to social class in conjugla violence level: Couples of the lowest class appeared to be more verbal aggression and physical violence. 3. The most severe Husband-to-Wife verbal aggression and physical violence were appeared when the conjugal power type is either Husband Dominant Type or Wife Dominant Type.

  • PDF

A Comparative Analysis of Existing Channel-Type Lining Board and New-Type lining Board Models (기존 채널형 복공판과 새로운 복공판 모델에 관한 비교분석 연구)

  • Kim Doo-Hwan;Kim Young-Sei
    • Journal of the Korean Society of Safety
    • /
    • v.19 no.3 s.67
    • /
    • pp.78-83
    • /
    • 2004
  • The channel-type lining board that partial welded on many partition frames is used to normal servicing lining board type. On this study is to investigate existing channel-type lining board's capacity by using the static loading test. From this study, to develop new-type lining board which reflect well cross section area and sectional modulus of existing channel-type lining board. Six types FEM model are adopted. The accumulated test results of stress conditions and deflections by section shapes will be used to analyzed the relation between the capacity and the section shape. With the comparing the results of static loading test and FEM analysis.

The Research on the Skin Type Test of $20{\sim}30's$ Women -Focused on the Reliability of Skin Type Test Questionnaires- ($20{\sim}30$대 여성의 피부 타입 측정에 관한 연구 -국내.외 화장품 회사의 피부 측정방법의 비교를 중심으로-)

  • Kim Jeong-Hee
    • Journal of the Korean Society of Costume
    • /
    • v.56 no.5 s.104
    • /
    • pp.59-74
    • /
    • 2006
  • The purpose of this study is to investigate the skin type of $20{\sim}30’s$ women that use skin type test paper of cosmetic companies and usual using condition for the cosmetics. The result is as follows; The research target is $20{\sim}30’s$ woman in Seoul area, around capital city area and Geonra province, we surveyed the difference among the group, after dividing the groups with job, monthly income. As the result of research on the usual using cosmetics and cleansing products, $20{\sim}30’s$ woman mostly have toilet water, lotion and foam type cleansing product and use them. As the result of consciousness of skin type combination skin type is 46.1%, dry skin type is 23%, oily skin type is 15%, sensitive skin type is 9%, normal skin type is 7%. To compare results of skin type test paper of cosmetics companies with consciousness of skin type, result of skin type test paper of cosmetics companies was different consciousness of skin type. The result of skin type test paper of B company is same as consciousness of skin type is 31.2% and this result among cosmetics companies was appeared high ratio. Among the results from 3 companies, the rate that all result for 1 person's skin type are accord, is just 8%. 2 companies among them have matching rate of 42%. Most of all, each results of skin type test paper of cosmetics companies was appeared difference. This result show the problem of objectivity about skin type test paper of cosmetics companies that they using it.

A Parametric Study for the Construction of Durability Test Track of a Wheel Type Vehicle (휠 차량의 내구 시험장 조성을 위한 매개변수 연구)

  • 송세철;김형근;박태건;김동준
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.6 no.1
    • /
    • pp.73-79
    • /
    • 1998
  • For the design and development of the wheel type excavator, the dynamic effects of travelling on the performance of the equipment should be first analyzed and conside- red in the initial design stage. In order to test the durability of the equipment in a short period, th travelling test should be performed over accelerated durability test tracks. which is more severe than general field roads such as city road, paved road, unpaved road and rough road. In this paper, a parametric study is performed in order to determine important design parameters of durability test track of a wheel type excavator. A rigid body model is developed using DADS and dynamic analysis is performed for the equipment travelling over several test roads with different severity. A comparison of test and analysis results is also presented.

  • PDF