• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.302-311
• /
• 2022

Sound barrier walls are one of the most effective alternatives for reducing environmental noise on roads and railways in the city center. The insertion loss of the sound barrier against road traffic noise is the sum of the sound transmission loss, sound absorption loss, and sound energy reduction due to the diffraction attenuation of the sound barrier. The sound transmission loss of the sound barrier is one of the important factors that determine the insertion loss of the sound barrier and is a basic indicator that determines the performance of the sound barrier. Nevertheless, there is not a separate standard in Korea for measuring the acoustic transmission loss of sound barrier panels. There are only a few conditions in KS F 4770 series that stipulates on the general material of sound barrier panels. This thesis examines the necessity of the acoustic transmission loss measurement and evaluation standards of sound barrier walls, and seeks a measurement method in a free sound field (anechoic chamber) sound receiving room considering the characteristics of sound barrier walls installed in external spaces, unlike indoor building materials. In addition, a single number evaluation method using a reference spectrum was proposed so that the sound insulation effect according to various installation places such as roadside or railroad side can be easily displayed.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.359-367
• /
• 2022

The purpose of this study was to explore the effect of learning effects by type on college life satisfaction for college students. A total of 250 copies of the survey were distributed, and a total of 219 copies were used for analysis except for 31 copies, excluding questionnaires with many poor or missing questions. The learning effect according to the socio-demographic characteristics of college students showed a significant difference in the form of cohabitation, and it was found that the learning effect was high in the order of alone and friends. Perceptual learning showed significant differences in the form of cohabitation, and it was found that perception learning was high in the order of alone, friends, and seniors and juniors. Cognitive learning showed significant differences in the form of cohabitation, and cognitive learning was found to be high in the order of friends, alone, and seniors and juniors. There was a significant difference in college satisfaction with the type of cohabitation, and it was found that college satisfaction was high in the order of alone, seniors and juniors, and friends. Finally, the higher the discovery learning, perceptual learning, and cognitive learning, the higher the college life satisfaction, and among them, discovery learning was found to have a great influence on college life satisfaction. Overall, the university should provide an environment where students can freely move between individuals and communities and live their university life. In addition, in preparation for problems occurring in the community, it will be necessary to activate the related counseling room.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.185-193
• /
• 2022

This study attempted to compare and analyze the commercially available multi-use patterns to develop mask patterns suitable for the face types of adult women. Through this, it was intended to provide necessary data to mask pattern development and products. As a results of comparing the dimensions and shapes of commercial multi-use mask patterns, there was a significant difference in dimensions even though it was a L-size mask manufactured for adults. As a result of the appearance evaluation of the virtual outfit, there were significant differences by design in the vertical of the center front line, the cover and space of the mask, the height of the nose, and the lower part of the mask. The side also showed significant differences in the covering of the side of the face, the space of the side, and the width and length of the string. As a result of the appearance evaluation, Mask 4 received the best evaluation. The shape of the mask pattern had a large dart in the lower part of the nose so that it can cover the three-dimensional shape of the face, but there was a difference in the degree and angle of the curve depending on the mask. Although the upper part of the mask, the lower part of the mask, and the cheek part are in close contact, the evaluation of the mask pattern, which has room in the nose and mouth, was high. It is thought that the mask pattern should be set according to the upper length, lower length, and nose height of the mask through analysis of the face shape and dimensions.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.131-137
• /
• 2022

As the age increases, the oral cavity, that is, the teeth and periodontium, also begin to age, and accordingly, a preparation process is required. The preparation process is an important period for oral health management to start continuously with oral health education consisting of knowledge, attitude, and behavior from the 20s. Therefore, to design a clinical dental hygiene course for patients who visited a dental clinic in Gyeonggi-do and received continuous care in an oral health care room after treatment, we tried to analyze the data of the dental hygiene assessment. As a dental hygiene assessment tool, based on personal information and general medical history, dental visit experience, bleeding on probing(BOP), bad breath measurement, phase contrast microscopy, and O'Leary index were performed. The number of subjects who had dental visits was 75.4% and those without experience were 24.6%, and as a result of the periodontal examination, generally bleeding was found in 76.3%. In preventive oral care, the stage of dental hygiene assessment in the 20s is an important first step. From this point on, it is an important time to be systematically habituated so that you can take responsibility for your own oral condition. Therefore, in this study, the results of dental hygiene assessment through oral examinations of subjects in their 20s are derived and presented as basic data for the development of dental hygiene performance competency of dental hygienists during the clinical dental hygiene process in oral health education and oral health management.

• Nuclear Engineering and Technology
• /
• v.8 no.4
• /
• pp.231-242
• /
• 1976

The effects of temperature and pressure of leaching water on the leaching of radionuclides from bitumen-waste products were studied. The principal results are as follows: The fraction of $^{90}$ Sr and $^{137}$ Cs leached for periods of up to 120 days at 8atm was 2.1$\times$10$^{-6}$ ($\textrm{cm}^2$/g)$^{-1}$ , day$^{-1}$ and 6.02$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ respectively and at 5$^{\circ}C$, 1.7$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ and 4.01$\times$10$^{-5}$ ($\textrm{cm}^2$/g)$^{-1}$ day$^{-1}$ respectively. These values were lower than those in atmospheric pressure and room temperature. No diffence in the leaching rate with sea and distilled water was observed for the bitumen-waste products containing 40wt% salts. It appears that these results could be saved by improving safety in the dumping of sea. The effect of the softening point of pure asphalt or bitumen-waste product by $^{60}$ Co irradiation was increased with increasing total dose. Irradiation of asphalts at a total dose of 5.8$\times$10$^{8}$ rad showed no evidence of volume and caused no swelling. The functional groups of blown asphalt by infrared spectra are also identified.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.105-111
• /
• 2021

⁸⁹Zr is a positron-emitting radioisotope, which has known as well-suited radioisotope for use in a monoclonal antibody-based imaging agent for immuno-PET. The purpose of this study was to quantitatively evaluate the diagnostic ability of general trastuzumab and thio-trastuzumab as HER2 positive receptors based on Df hexadentate iron chelator. Desferrioxamine-p-SCN (Df-Bz-NCS) and desferroixamine-maleimide (Df-Mal) were purchased from Macrocyclics (Dallas, TX, USA). The trastuzumab was purchased from Roche (Schweiz), and thio-trastuzumab was obtained from professor Hyo-Jeong Hong group (Kangwon National University). The radioisotope ⁸⁹Zr was produced by domestic purification system and KIRAMS using medical cyclotron (50 MeV, Scantronix). The conjugates of Df-trastuzumab and Df-thio-trastuzumab were prepared with Df-Bz-NCS and Df-Mal under basic aqueous solution (pH 8-9) at room temperature, respectively. The conjugates purified by PD-10 column were mixed with dried ⁸⁹Zr chloride. ⁸⁹Zr-labeled conjugates were purified and concentrated by Amicon ultra centrifugal filter. The preparation step and time of ⁸⁹Zr-labeled conjugates was shorted as 4 steps within 2 hours. ⁸⁹Zr-labeled conjugates showed the highly radiochemical purity of over 98%, and were very stable until 7 days by the analysis of radio-ITLC method. Each radio-labeled conjugates were also exhibited the highly stability in both PBS buffer and mouse serum. Immuno-PET imaging of ⁸⁹Zr-labeled conjugates in mice bearing gastric cancer xenograft tumors with HER2 expression showed high tumor uptake in the NCI-N87 HER2-expressing. However, ⁸⁹Zr-Df-Mal-thio-trastuzumab showed a relatively lower tumor-to-background ratio than ⁸⁹Zr-Df-Bz-trastuzumab, as well as whole-body distribution. In the results, ⁸⁹Zr-Df-Bz-trastuzumab was evaluated to have a relatively higher HER2 diagnostic ability than ⁸⁹Zr-Df-Mal-thio-trastuzumab.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.119-128
• /
• 2023

This study was examined for investigating the quality changes of spring kimchi cabbage under various treatments (pre-drying/pre-cooling, packaging types, and stacking and loading in container and pallete in the storage room) during cold storage. The results showed that control (upward stacking without pre-drying/pre-cooling and HDPE or PVC film cover) was increased significantly in weight loss and trimming loss, compared to other treatments such as DPDH (downard stacking + pre-drying + HDPE), DPDP (downard stacking + pre-drying + PVC), DPCH (downnard stacking + pre-cooling + HDPE), and UPCH (upward stacking + pre-cooling +HDPE) during storage for three months. In Sensory evaluation, judging from marketable properties, the desirable appearance of spring kimchi cabbage with the modified pallet-unit MA packed, PE, and PVC film wrapping could be maintained until 9 weeks after pre-drying/pre-cooling. Meanwhile, the control without any treatments after 6 weeks, the sensory score was declined, significantly. In general, the low temperature (10℃ and 2℃) of pre-treatment with combination of plastic film packaging in spring kimchi cabbage storage could inhibit the physiological activity and reduce the direct exposure of environmental cold air in the storage. Therefore, these two variables were the key points for extending the shelf-life of spring kimchi cabbage.

• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.79-85
• /
• 2022

Recently, a smartphone manufactured on a flexible substrate has been released as an electronic device, and research on a stretchable electronic device is in progress. In this paper, a silicon-based stretchable material is made and used as a substrate to implement and evaluate an optical sensor device using oxide semiconductor. To this end, a substrate that stretches well at room temperature was made using a silicone-based solution rubber, and the elongation of 350% of the material was confirmed, and optical properties such as reflectivity, transmittance, and absorbance were measured. Next, since the surface of these materials is hydrophobic, oxygen-based plasma surface treatment was performed to clean the surface and change the surface to hydrophilicity. After depositing an AZO-based oxide film with vacuum equipment, an Ag electrode was formed using a cotton swab or a metal mast to complete the photosensor. The optoelectronic device analyzed the change in current according to the voltage when light was irradiated and when it was not, and the photocurrent caused by light was observed. In addition, the effect of the optical sensor according to the folding was additionally tested using a bending machine. In the future, we plan to intensively study folding (bending) and stretching optical devices by forming stretchable semiconductor materials and electrodes on stretchable substrates.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.725-733
• /
• 2023

The evaluation of functional active ingredients and dyeing effect on cotton fabric using 16 types of natural products water extracts and 50% ethanol extracts, there were differences in color intensity, but 6 types of red, 5 types of yellow, 2 types of orange, and 3 types of green were observed. In general, the color of the 50% ethanol extract was high and clear. As a result of dyeing by immersing cotton gauze in water extracts and 50% ethanol extracts of these natural products for 2 days, the dyeing effect was generally good, and it was observed that there was little fading decrease in color even after drying at room temperature and opening and storing. The pH of the water extracts of 16 natural products ranged from neutral to slightly acidic, with no side effects on the skin. For DPPH free radical inhibition antioxidant effect, the effect of 50% ethanol extract for each sample was better than that of water extract. As for the polyphenol content, the content of the 50% ethanol extract tended to be higher than that of the water extract. Therefore, the purpose of this study was to investigate the correlation between the antioxidant activity of 16 natural extracts and the prevention of female vaginitis.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.285-290
• /
• 2023

Poly-lactic acid (PLA) is the most promising polymer in additive manufacturing as an alternative to acrylonitrile butadiene styrene (ABS). Since it is produced from renewable resources such as corn starch and sugar beets, it is also biocompatible and biodegradable. However, PLA has a couple of issues that limit its use. First, it has a comparatively low glass transition temperature of around 60 ℃, such that it exhibits low thermal resistance. Second, PLA has low impact strength because it is brittle. Due to these problems, scientists have found methods to improve the crystallinity and ductility of PLA. Polyethylene glycol (PEG) is one of the most studied plasticizers for PLA to give it chain mobility. However, the blend of PLA and PEG becomes unstable, and phase separation occurs even at room temperature as PEG is self-crystallized. Thus, it is necessary to investigate the optimal mixing ratio of PLA-PEG at the molecular scale. In this study, molecular dynamics will be conducted with various ratios of L-type PLA (PLLA) or DL-type PLA-PEG (PDLA-PEG) systems by using BIOVIA Materials Studio.