• 제목/요약/키워드: Structural and optical properties

검색결과 935건 처리시간 0.028초

Pb1-xCdxI2 단결정의 구조적 광학적 특성 연구 (A Study on Structural and Optical Properties of Pb1-xCdxI2 Single Crystals)

  • 송호준;최성길;김화택
    • 한국재료학회지
    • /
    • 제12권11호
    • /
    • pp.875-879
    • /
    • 2002
  • $Pb_{1-x}$ $Cd_{x}$ $I_2$ (x=0.0, 0.2, 0.5, 0.7, 0.9, 1.0) single crystals were grown by using Bridgman method and their structural and optical properties were investigated from the measurement of X-ray diffraction, optical absorption and photoluminescence. As-grown single crystals have hexagonal closed packed layered structure. The values of lattice constant c decrease with increasing composition x. Direct and indirect transition optical energy band gaps are calculated from optical absorption spectra measured at room temperature. They increase exponentially from 2.3eV to 3.2 eV with increasing composition x. The energies of photoluminescence peak due to donor bound exciton measured at 6K increase with increasing composition . However, the peak energies of donor-acceptor pair (DAP) are independent of the optical energy band gaps of $Pb_{1-x}$/$Cd_{x}$ $I_2$ single crystals.

O2/Ar 혼합 유량비를 변수로 갖는 라디오파 마그네트론 스퍼터링으로 성장된 ZnO 박막의 특성 (Properties of ZnO Thin Films Grown by Radio-frequency Magnetron Sputtering in terms of O2/Ar Mixture Flow Ratio)

  • 조신호
    • 한국전기전자재료학회논문지
    • /
    • 제20권11호
    • /
    • pp.932-938
    • /
    • 2007
  • The structural, optical, and electrical properties of ZnO thin films grown on glass by radio-frequency (rf) magnetron sputtering were investigated. The mixture flow ratio of $O_2$ to Ar, which was operated with sputtering gas, was chosen as a parameter for growing high-qualify ZnO thin films. The structural properties and surface morphologies of the thin films were characterized by the X-ray diffraction and the atomic force microscope, respectively. As for the optical properties of the films, the optical absorbance was measured in the wavelength range of 300-1100 nm by using UV-VIS spectrophotometer. The optical transmittance, absorption coefficient, and optical bandgap energy of ZnO thin films were calculated from the measured data. The crystallinity of the films was improved and the bandgap energy was increased from 3.08 eV to 3.23 eV as the oxygen flow ratio was increased from 0 % to 50 %. Furthermore, The ultraviolet and violet luminescences were observed by using photoluminescence spectroscopy. The hall mobility was decreased with the increase of oxygen flow ratio.

Post Deposition Annealing Effect on the Structural, Electrical and Optical Properties of ZnO/Ag/ZnO Thin Films

  • Kim, Daeil
    • 열처리공학회지
    • /
    • 제25권2호
    • /
    • pp.85-89
    • /
    • 2012
  • Transparent conductive ZnO/Ag/ZnO (ZAZ) multilayer films were deposited by Radio frequency (RF) magnetron sputtering and direct current (DC) magnetron sputtering. The effects of post deposition vacuum annealing temperature on the structural, electrical and optical properties of the ZAZ multilayer films were investigated. The thickness of ZAZ films is kept constant at ZnO 50 nm/Ag 5nm/ZnO 45 nm, while the vacuum annealing temperatures were varied from 200 and $400^{\circ}C$, respectively. As-deposited ZAZ films exhibit a sheet resistance of $6.1{\Omega}/{\Box}$ and optical transmittance of 72.7%. By increasing annealing temperature to $200^{\circ}C$, the resistivity decreased to as low as $5.3{\Omega}/{\Box}$ and optical transmittance also increased to as high as 82.1%. Post-deposition annealing of ZAZ multilayer films lead to considerably lower electrical resistivity and higher optical transparency, simultaneously by increased crystallization of the films.

Effects of annealing temperature on structural and optical properties of CdS Films prepared by RF magnetron sputtering

  • 황동현;안정훈;손영국
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.233-233
    • /
    • 2010
  • CdS thin films were deposited on glass substrates by R.F. magnetron sputtering method and some of the samples were treated by rapid thermal annealing (RTA) process. Effects of thermal annealing on structural and optical properties were investigated at different temperatures ranging from 100 to $600^{\circ}C$. The crystallographic structure of the films and the size of the crystallites in the films were studied by X-ray diffraction. The crystallite sizes were found to increase, and the X-ray diffraction patterns were seen to sharpen by annealing. Optical properties of the films were calculated using the envelope method and the photoluminescence measurements. The optical properties of the films were seen to be dependent on the film thicknesses. The energy gap of the films was found to decrease by annealing. The band edge sharpness of the optical absorption was seen to oscillate by thermal annealing. Annealing over $400^{\circ}C$ was seen to degrade the optical properties of the film. The best annealing temperature for the films was found to be $400^{\circ}C$ from the optical properties. It is observed that the CdS film annealed at $400^{\circ}C$ reveals the strongest UV emission intensity and narrowest full width at half maximum among the temperature ranges studied. The enhanced UV emission from the film annealed at $400^{\circ}C$ is attributed to the improved crystalline quality of CdS thin film due to the effective relaxation of residual compressive stress and achieving maximum grain size. The results show that heat treatments under optimal annealing condition can provide significant improvements in the properties of CdS thin films.

  • PDF

태양전지용 CdS 박막의 구조적 및 광학적 특성에 미치는 반응용액의 pH 영향 (Effects of pH of Reaction Solution on the Structural and Optical Properties of CdS Thin Films for Solar Cell Applications)

  • 이재형
    • 한국전기전자재료학회논문지
    • /
    • 제24권8호
    • /
    • pp.616-621
    • /
    • 2011
  • In this paper, CdS thin films, which were widely used window layer of the CdTe and the Cu(In,Ga)$Se_2$ thin film solar cell, were grown by chemical bath deposition, and effects of pH of reaction solution on the structural and optical properties were investigated. For pH<10.5, as the pH of reaction solution was higher, the deposition rate of CdS films was increased by improving ion-by-ion reaction in the substrate surface and the crystallinity of the films was improved. However, when the pH was higher than 10.5, the deposition rate was decreased because of smaller $Cd^{2+}$ ion concentration in the reaction solution. Also, the crystallinity of the films were deteriorated. The CdS films deposited at lower pH showed poor optical transmittance due to adsorbed colloidal particles, while the transmittance was improved for higher pH.

전자빔 조사에너지에 따른 ITO/ZnO 적층박막의 구조적, 전기적, 광학적 특성 변화 (Effect of Electron Irradiation on the Structural Electrical and Optical Properties of ITO/ZnO Thin Films)

  • 김선경;김대일
    • 열처리공학회지
    • /
    • 제27권5호
    • /
    • pp.225-229
    • /
    • 2014
  • The influence of electron irradiation energy(eV) on the structural, electrical and optical properties of ITO/ZnO bi-layered films prepared with RF magnetron sputtering has been investigated. The ITO/ZnO show the lowest resistivity of $2.8{\times}10^{-4}{\Omega}cm$. The optical transmittance in a visible wave length region also increased with the electron irradiation energy. The film irradiated at 900 eV shows 82---- of optical transmittance in this study. By comparison of figure of merit, it was observed the optical transmittance and electrical resistivity of the films were dependent on the electron irradiation energy and optoelectrical performance of ITO/ZnO film is improved with electron irradiation.

스퍼터 압력에 따른 태양전지용 CdTe 박막의 구조적, 광학적 특성 (Influence of Sputter Pressure on the Structural and Optical Properties of CdTe for Solar Cell Applications)

  • 이재형;최성헌;이동진;이종인;임동건;양계준;이준신
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.101-102
    • /
    • 2005
  • Cadmium telluride (CdTe) films have been prepared on Coming 7059 glass, molybdemium (Mo), and polyimide (PI) substrates by r.f. magnetron sputtering technique. The influence of the sputter pressure on the structural and optical properties of these films was evaluated. In addition, a comparison of the properties of the films deposited on different substrates was performed.

  • PDF

Sputtering 으로 증착된 압력변화에 따른 CdTe 박막특성 (Influence of Sputter Pressure on the Structural and Optical Properties of CdTe Films)

  • 이동진;이재형;이종인;정학기;정동수
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.106-107
    • /
    • 2006
  • Cadmium telluride (CdTe) films have been prepared on Corning 7059 glass, molybdenum (Mo), and polyimide (PI) substrates by r.f. magnetron sputtering technique. The influence of the sputter pressure on the structural and optical properties of these films was evaluated. In addition, a comparison of the properties of the films deposited on fferent substrates was performed.

  • PDF

라디오파 마그네트론 스퍼터링으로 성장한 질소와 알루미늄 도핑된 ZnO 박막의 특성 (Properties of Nitrogen and Aluminum Codoped ZnO Thin Films Grown by Radio-frequency Magnetron Sputtering)

  • 조신호;조선욱
    • 한국표면공학회지
    • /
    • 제41권4호
    • /
    • pp.129-133
    • /
    • 2008
  • Nitrogen and aluminum codoped ZnO(NAZO) thin films were grown on glass substrates with changing the nitrogen flow ratio by radio-frequency magnetron sputtering. The structural, optical, and electrical properties of the NAZO films were investigated. The surface morphologies and the structural properties of the thin films were analyzed by using the X-ray diffraction and scanning electron microscopy. The NAZO thin film, deposited at nitrogen flow ratio of 0%, showed a strongly c-axis preferred orientation and the lowest resistivity of $3.2{\times}10^{-3}{\Omega}cm$. The intensity of ZnO(002) diffraction peak was decreased gradually with increasing the nitrogen flow ratio. The optical properties of the films were measured by UV-VIS spectrophotometer and the optical transmittances for all the samples were found to be an average 90% in the visible range. Based on the transmittance value, the optical bandgap energy for the NAZO thin film deposited at nitrogen flow ratio of 0% was determined to be 3.46 eV. As for the electrical properties, the carrier concentration and the hall mobility were decreased, but the electrical resistivity was increased as the nitrogen flow ratio was increased.