• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.647-657
• /
• 2006

Probabilistic Risk Assessment considering statistically random variables is performed for the preliminary design of a Cable Stayed Bridge, which is Prestressed Concrete Bridge consisted of cable and plate girders, based on the method of Working Stress Design and Strength Design. Component reliabilities of cables and girders have been evaluated using the response surface of the design variables at the selected critical sections based on the maximum shear, positive and negative moment locations. Response Surface Method (RSM) is successfully applied for reliability analyses for this relatively small probability of failure of the complex structure, which is hard to obtain through Monte-Carlo Simulations. or through First Order Second Moment Method that can not easily calculate the derivative terms of implicit limit state functions. For the analysis of system reliability, parallel resistance system consisting of cables and plate girder is changed into series connection system and the result of system reliability of total structure is presented. As a system reliability, the upper and lower probabilities of failure for the structural system have been evaluated and compared with the suggested prediction method for the combination of failure modes. The suggested prediction method for the combination of failure modes reveals the unexpected combinations of element failures in significantly reduced time and efforts compared with the previous permutation method or system reliability analysis method, which calculates upper and lower bound failure probabilities.

• Journal of Service Research and Studies
• /
• v.13 no.4
• /
• pp.70-96
• /
• 2023

Recently, the high turnover rate of nursing staff and the problems caused by increased job stress have been highlighted as social issues, and the problem of 'Taeoom' in nursing organizations has received increasing attention. Therefore, the purpose of this study is to propose a solution to the Taeoom problem, including bullying in the nursing work environment, as there is an urgent need to find a solution to prevent and overcome this problem. For this purpose, based on the S-O-R framework and previous studies, job stress and turnover intention were derived as outcome variables of Taeoom and communication competence as an antecedent factor, and a research model was constructed with the expectation that mindfulness and social support would serve as moderating variables to help overcome this problem. Data were collected through a survey of 300 nurses who had experienced Taeoom within the past year, and the hypotheses were tested using a structural equation model. The results revealed that the higher the communication competence of nurses, the less they perceived the damage of Taeoom, and that the damage caused by Taeoom leads to turnover intention through high job stress. In addition, mindfulness and social support significantly attenuated the positive effects of burnout on job stress and job stress on turnover intention, respectively. The significance of this study is that it proposed an extended P-S-O-R framework by adding a prevention stage to the existing S-O-R framework, and further tested the moderating effects of mindfulness and social support variables. It is expected that the findings of this study will provide concrete guidelines to prevent and overcome the Taeoom problem that can be applied in practice.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.479-493
• /
• 2023

The need for safety management has arisen due to the increasing number of years of operated underground structures, such as tunnels and utility tunnels, and accidents caused by those aging infrastructures. However, in the case of privately managed underground utility ducts, there is a lack of detailed guidelines for facility safety and maintenance, resulting in inadequate safety management. Furthermore, the absence of basic design information and the limited space for safety assessments make applying currently used non-destructive testing methods challenging. Therefore, this study suggests non-destructive inspection methods using ultrasonic and impact-echo techniques to assess the quality of underground structures. Thickness, presence of rebars, depth of rebars, and the presence and depth of internal defects are assessed to provide fundamental data for the safety assessment of box-type general underground structures. To validate the proposed methodology, different conditions of concrete specimens are designed and cured to simulate actual field conditions. Applying ultrasonic and impact signals and collecting data through multi-channel accelerometers determine the thickness of the simulated specimens, the depth of embedded rebar, and the extent of defects. The predicted results are well agreed upon compared with actual measurements. The proposed methodology is expected to contribute to developing safety diagnostic methods applicable to general underground structures in practical field conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.407-415
• /
• 2010

In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.1
• /
• pp.35-48
• /
• 2010

Today, the fashion market challenged by a maturing retail market needs a new paradigm in the "evolution of brand" to improve their comparative advantages. An important issue in fashion marketing is lifestyle brand extension with a specific aim to meet consumers' specific needs for their changing lifestyle. For fashion brand extensions into lifestyle product categories, Gen Y and Baby Boomer are emerging as "prospects"-Baby Boomers who are renovating their lifestyle, and generation Y experiencing changes in their life stage-with demands for buying new products. Therefore, it is imperative that apparel companies pay special attention to the consumer cohort for brand extension to create and manage their brand equity in a new product category. The purposes of this study are to (a) evaluate brand equity between parent and extension brands; (b) identify consumers' perceived marketing elements for brand extension; and (c) estimate a structural equation model for examining causative relationship between marketing elements and brand equity for brand extensions in lifestyle product category including home fashion items for the selected two groups (e.g., Gen Y, and Baby boomer). For theoretical frameworks, this study focused on the traditional marketing 4P's mix to identify what marketing element is more importantly related to brand extension equity for this study. It is assumed that comparable marketing capability can be critical to establish "brand extension equity", leads to successfully entering the new categories. Drawing from the relevant literature, this study developed research hypotheses incorporating brand equity factors and marketing elements by focusing on the selected consumers (e.g., Gen Y, Baby Boomer). In the context of brand extension in the lifestyle products, constructs of brand equity consist of brand awareness/association, brand perceptions (e.g., perceived quality, emotional value) and brand resonance adapted from CBBE factors (Keller, 2001). It is postulated that the marketing elements create brand extension equity in terms of brand awareness/association, brand perceptions by the brand extension into lifestyle products, which in turn influence brand resonance. For data collection, the sample was comprised of Korean female consumers in Gen Y and Baby Boomer consumer categories who have a high demand for lifestyle products due to changing their lifecycles. A total of 651 usable questionnaires were obtained from female consumers of Gen Y (n=326) and Baby Boomer (n=325) in South Korea. Structural and measurement models using a correlation matrix was estimated using LISREL 8.8. Findings indicated that perceived marketing elements for brand extension consisted of three factors: price/store image, product, and advertising. In the model of Gen Y consumers, price/store image had a positive effect on brand equity factors (e.g., brand awareness/association, perceived quality), while product had positive effect on emotional value in the brand extensions; and the brand awareness/association was likely to increase the perceived quality and emotional value, leading to brand resonance for brand extensions in the lifestyle products. In the model of Baby Boomer consumers, price/store image had a positive effect on perceived quality, which created brand resonance of brand extension; and product had a positive effect on perceived quality and emotional value, which leads to brand resonance for brand extension in the lifestyle products. However, advertising was negatively related to brand equity for both groups. This study provides an insight for fashion marketers in developing a successful brand extension strategy, leading to a sustainable competitive advantage. This study complements and extends prior works in the brand extension through critical factors of marketing efforts that affect brand extension success. Findings support a synergy effect on leveraging of fashion brand extensions (Aaker and Keller, 1990; Tauber, 1988; Shine et al., 2007; Pitta and Katsanis, 1995) in conjunction with marketing actions for entering into the new product category. Thus, it is recommended that marketers targeting both Gen Y and Baby Boomer can reduce marketing cost for entering the new product category (e.g., home furnishings) by standardized marketing efforts; fashion marketers can (a) offer extension lines with premium ranges of price; (b) place an emphasis on upscale features of store image positioning by a retail channel (e.g., specialty department store) in Korea, and (c) combine apparel with lifestyle product assortments including innovative style and designer’s limited editions. With respect to brand equity, a key to successful brand extension is consumers’ brand awareness or association that ensures brand identity with new product category. It is imperative for marketers to have knowledge of what contributes to more concrete associations in a market entry into new product categories. For fashion brands, a second key of brand extension can be a "luxury" lifestyle approach into new product categories, in that higher price or store image had impact on perceived quality that established brand resonance. More importantly, this study increases the theoretical understanding of brand extension and suggests directions for marketers as they establish marketing program at Gen Y and Baby Boomers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.815-826
• /
• 1994

Skew bridges are found frequently in new bridge construction due to geographical conditions when new constructing bridges are put across the existing highways, railroads or rivers. This study is to investigate the static behaviors of the steel deck plates of skew bridges which are increasingly used in bridges due to outstanding quality of structural steels, development of welding techniques, in order to reduce dead loads and period of constructions. The static behaviours of steel deck plates are analyzed using general purpose FE code SAP90 by modeling the skewed deck plates with rigorous finite elements, as the skew angles vary. The results of finite element analysis for the behaviors of steel deck plates and concrete slabs in acute, obtuse corners and center of decks are compared and discussed as the skew angles vary from $90^{\circ}$ to $30^{\circ}$. Two types of decks are treated, as isotropic plates and orthotropic plates, respectively. From the results of finite element analysis, it is found that more moments, reactions, and deflections occur at the obtuse corners than at the center of skewed decks regardless of isotropy or orthotropy. Especially, in case of the skewed deck plates with skew angles less than 45 degrees, significantly large discrepancies for the values of those internal forces are shown between the skewed and right deck plates. This study estimates the characteristics of deck behaviors according to skew angles, and proposes limitations of skew angles and the ciritical regions of decks.

• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2018

It is ten years since the Good Agricultural Practices (GAP) certification system was implemented in Korea, and the government aims to acquire GAP certification up to 25% of the total agricultural areas by 2022. As of the end of 2017, 6.3% of the total cultivated area and 8.1% of the total farm households were certified, which is slower than expected. The purpose of this study was to investigate the causes of the GAP accreditation through the surveys and on site inspections of the GAP certified farmers and to propose the development plans according to the problems analysis of the current system in order to expand the GAP certification. Certified farmers recognized the need for agricultural safety and hygiene, but there were a lot of nonconformities regarding practical practices. This is due to the ambiguity of the certification standards and the wrong ways in the training method for the producers. GAP certification is slow to expand to farmers and low consumer awareness is considered a structural problem of GAP certification system, and improvement measures are needed accordingly. It is necessary to convert the state-led GAP certification system into a state-led private certification system. It is necessary for the government to focus on policy, research and follow-up management. In addition, it is necessary to establish a separate organization in the form of a contribution organization for the certification, education, and public relations. In addition, long-term plan must be established and systematically carried out. It is necessary to integrate too many certification agencies compared to the farming scale of Korea, and it is necessary to realize the application fee for realizing the financial independence of the certification body and correct certification work. In addition, inspector qualification standards should be strengthened and training system should be improved to nurture high quality inspectors. Simplified certification standards based on statutes need to be subdivided into practical action plans. In order to improve the GAP certification system, it is necessary to have a discussion through a committee composed of specialists from industry and academia, and it will be possible to contribute to the safety of the food of the people through the production of safe by drawing concrete development plans.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.217-225
• /
• 2004

This study was performed to provide the basic knowledge about the mushroom cultivation facilities. Classified current status of cultivation facilities in Gyeongnam province was investigated by questionnaire. The structure of Pleurotus eryngii cultivation facilities can be classified into the simple and permanent frame type. The simple frame structures were mostly single-span type, on the other hand, the permanent frame structures were more multi-span than simple structures. And the scale of cultivation facilities was very different regardless of structural type. But as a whole, the length, width and ridge height were prevailing approximately 20.0 m, $6.6\~7.0m$ and $4.6\~5.0m$ range, respectively. The floor area was about $132\~160\;m^2$, and floor was built with concrete to protect mushrooms from various harmful infection. The roof slope of the simple and permanent type showed about $41.5^{\circ}\;and\;18.6\~28.6^{\circ}$, respectively. The width and layer number of growing bed for mushroom cultivation were around $1.2\~1.6m$, 4 layers in common, respectively. Most of year round cultivation facilities were equipped with cooler, heater, humidifier, and ventilating fan. Hot water boiler was the most commonly used heating system, the next was electric heater and then steam boiler. The industrial air conditioner has been widely used for cooling. And humidity was controlled mostly by ultra-wave or centrifuging humidifier. But some farmers has been using nozzle system for auxiliary purpose. More then $90\%$ of the mushroom house had the independent environment control system. The inside temperature was usually controlled by sensor, but humidity and $CO_2$ concentration was controlled by timer for each growing stage. The capacity of medium bottle was generally 850 cc and 1100cc, some farms used 800 cc, 950 co and 1,250 cc. Most of mushroom producted has been usually shipped to both circulating company and joint market.

• Journal of Distribution Research
• /
• v.17 no.3
• /
• pp.59-92
• /
• 2012

With accumulated research evidence, there is little doubt that leadership behavior is related to a wide variety of positive individual and organizational outcomes. Indeed, leadership behavior has been empirically linked to increased employee satisfaction, organizational commitment, extra effort, turnover intention, organizational citizenship behavior, and overall employee performance. Although leadership behavior has been linked to a number of positive organizational outcomes, research regarding the antecedents of such behavior is limited. Especially there is little research dealing with the antecedents of inter-organizational leadership behavior. This study interests in inter-organizational ethical leadership among marketing channel members. In both the mass media and the academic association, there has been a surge in interest in the ethical and unethical behavior of leaders. Although the corporate scandals in recent years may explain much of the mass media and popular focus, academics' interest has been limited by evidence that ethical leadership behavior is associated with both positive and negative inter-organizational processes and performances. This study tried to contribute to this body of knowledge by examining antecedents of ethical leadership. Ethical leadership is defined "the demonstration of normatively appropriate conduct through personal actions and interpersonal relationships, and the promotion of such conduct to followers through two-way communication, reinforcement, and decision-making." Ethical leaders not only inform individuals of the behefits of ethical behavior and the cost of inappropriate behavior, such leaders also set clear standards and use rewards and fair and balanced punishment to hold followers accountable for their ethical conduct. Despite the assume importance and prominence of ethical leadership among organizations, there are still many questions relating to its antecedents and consequences. One is whether the likelihood of an leading organization being perceived as an ethical leader among other following organizations in marketing channels can be predicted using its characteristics and inter-organizational relationship maintenance skills. Identifying trait and skill antecedents will aid in the development of strategies for selecting and developing ethical leaders and determining the best means to reinforce ethical behaviors. The purpose of this study is to investigate the effects of three categorized variables on ethical leadership of channel leader. To be concrete, this study develops a model of the antecedents of three conceptually distinct forms of channel leader characteristics, such as organizational traits, inter-organizational relationship maintenance strategies, and supplier management strategies, and tests the hypothesized differential effects on ethical leadership of marketing channel leaders. The reason why this study deals with discount store channel is that there is very strong inter-dependence between a discount store and its suppliers. Their strong inter-dependence makes their relationship as the relationship between a leader and suppliers and creates an atmosphere that leadership occur without difficulty. The research model is as follows. For the purpose of empirical testing, 295 respondents of suppliers of discount store channel in Korea were surveyed. The procedures included scale reliability, and discriminant and convergent validity were used to validate measures. Also, the reliability measurements traditionally employed, such as the Cronbach's alpha, were used. All the reliabilities were greater than .70. This study conducted confirmatory factor analyses to assess the validity of our measurements. All items loaded significantly on their respective constructs(with the lowest t-value being 15.2), providing support for convergent validity. We then examined composite reliability and average variance extracted(AVE). The composite reliability of each construct was greater than .70. The AVE of each construct was greater than .50. This study tested research model using Partial Least Square(PLS). The estimation of the structural equation model revealed an acceptable fit of the model to the data($r^2$=.851). Thus, This study concluded that the model fit was considered acceptable. The results of PLS are as follows. The results indicated that conscientiousness, openness, conflict management, social networks, training, fair reward had positive effects on ethical leadership of channel leaders. On the other hand, emotional insecure had negative effect and agreeableness, assurance, and inter-organizational communication had no significant effect on supply chain leadership.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.651-660
• /
• 2007

Acid drainage has been recognized as an environmental concern in abandoned mine sites for long time. Recently, the environmental and structural damage by acid drainage is a current issue in construction sites in Korea. Here, the author introduces the type of damages by acid drainage in construction sites and emphasizes the importance of geoscience discipline in solving the problem. Metasedimentary rock of Okcheon group, coal bed of Pyeongan group, Mesozoic volcanic rock. and Tertiary sedimentary and volcanic rocks are the major rock types with a high potential for acid drainage upon excavation in Korea. The acid drainage causes the acidification and heavy metal contamination of soil, surface water and groundwater, the reduction of slope stability, the corrosion of slope structure, the damage on plant growth, the damage on landscape and the deterioration of concrete and asphalt pavement. The countermeasure for acid drainage is the treatment of acid drainage and the prevention of acid drainage. The treatment of acid drainage can be classified into active and passive treatments depending on the degree of natural process in the treatment. Removal of oxidants, reduction of oxidant generation and encapsulation of sulfide are employed for the prevention of acid drainage generation.