• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.289-295
• /
• 2007

A simple electric circuit of an infrared photodiode electrode (IPDE) was utilized to monitor iron using square-wave (SW) anodic stripping voltammetry (SV) and cyclic voltammetry (CV). The optimum analytical conditions were determined and were compared with those of common working electrodes. The comparison showed that CV is more sensitive and convenient to use than the common voltammetry methods. At the optimized conditions, the working ranges of 0.1- to 0.8- and 0.85- to 6.0 mg/L iron was obtained. Relative standard deviation of 15 measurements of iron (0.4 mg/L) was 0.09%. The analytical detection limit was found to be $80{\pm}0.6ug/L$, which was applied to iron in waste water.

• Journal of the Korean Chemical Society
• /
• v.43 no.1
• /
• pp.36-41
• /
• 1999

The adsorptive stripping voltammetric determination method of trace germanium (IV) using mercaptoacetic acid as a ligand was studied. Optimal conditions were found to be 0.25 M NaCl solution (pH 6.0) containing mercaptoacetic acid concentration of $5.0{\times}10^{-6}M$. The peak potential appeared at - 1.402 V vs. Ag/AgCl. Effects of sodium chloride concentration, mercaptoacetic acid concentration, and accumulation time for the complex of Ge(IV)-Mercaptoacetic acid on the peak current were studied. Amberlite IRC-718 chelating resin was applied to the separation of Ge(IV) from other metal ions.

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.119-125
• /
• 1997

A stripping voltammetric procedure for determining ruthenium was developed, based on the adsorptive accumulation of ruthenium in the presence of hydrazine in acidic acetate buffer. After preconcentration of ruthenium compelex and reduction, the ruthenium-catalyzed hydrogen current at -0.84V was measured by differential pulse voltammetry. Optimal experimental conditions were found to be a stirred acetate buffer solution(pH 2.0) containing 0.01M acetate and 0.01M hydrazine, accumulation potential of -0.76V, and a scan rate of 5mV/s. The detection limit was $2{\times}10^{-9}M$ for a 7 min accumulation period. The possible interferences by other platinum group metals were also investigated.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.23-28
• /
• 1995

Differential-pulse cathodic stripping voltammetry was applied to the Sn(II)-cupferron complex in 0.1 M acetate buffer solution (pH 4.20). Effects of solution pH, ligand concentration, accumulation potential, and accumulation time on the reduction peak current for the adsorptive complex of Sn(II)-cupferron were investigated. Interferences by other metal cations that affected on reduction peak current were also discussed. The detection limit was 3.1${\times}$10-9 M (0.37 ppb) of Sn(II) with 60 seconds accumulation time. The relative standard deviation (n=8) for 5${\times}$10-8 M Sn(II) was 3.0%.

• Journal of Electrochemical Science and Technology
• /
• v.4 no.1
• /
• pp.1-18
• /
• 2013

Gallium is an important element in the production of a variety of compound semiconductors for optoelectronic devices. Gallium has a low melting point and is easily oxidized to give oxides of different compositions that depend on the conditions of solutions containing Ga. Gallium electrode reaction is highly irreversible in acidic media at the dropping mercury electrode. The passive film on a gallium surface is formed during anodic oxidation of gallium metal in alkaline media. Besides, some results in published reports have not been consistent and reproducible. An increase in the demand of intermetallic compounds and semiconductors containing gallium gives rise to studies on electrosynthesis of them and an increase of gallium concentration in the environment with various application of gallium causes the development of electroanalysis tools of Ga. It is required to understand the electrochemistry of Ga and to predict the electrochemical behavior of Ga to meet these needs. Any review papers related to the electrochemistry of gallium have not been published since 1978, when the review on the subject was published by Popova et al. In this study, the redox behavior, anodic oxidation, and electrodeposition of gallium, and trace determination of gallium by stripping voltammetries will be reviewed.

• Toxicological Research
• /
• v.29 no.3
• /
• pp.211-215
• /
• 2013

The trace toxic metal copper was assayed using mercury immobilized on a carbon nanotube electrode (MCW), with a graphite counter and a reference electrode. In this study, a macro-scale convection motor was interfaced with a MCW three-electrode system, in which a handmade MCW was optimized using cyclic- and square-wave stripping voltammetry. An analytical electrolyte for tap water was used instead of an expensive acid or base ionic solution. Under these conditions, optimum parameters were 0.09 V amplitude, 40 Hz frequency, 0.01 V incremental potential, and a 60-s accumulation time. A diagnostic working curve was obtained from 50.0 to 350 ${\mu}g/L$. At a constant Cu(II) concentration of 10.0 ${\mu}g/L$, the statistical relative standard deviation was 1.78% (RSD, n = 15), the analytical accumulation time was only 60 s, and the analytical detection limit approached 4.6 ${\mu}g/L$ (signal/noise = 3). The results were applied to non-treated drinking water. The content of the analyzed copper using 9.0 and 4.0 ${\mu}g/L$ standards were 8.68 ${\mu}g/L$ and 3.96 ${\mu}g/L$; statistical values $R^2$ = 0.9987 and $R^2$ = 0.9534, respectively. This method is applicable to biological diagnostics or food surveys.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.2
• /
• pp.121-126
• /
• 2010

An amperometric ascorbic acid selective sensor utilizing the transfer reaction of proton liberated from the dissociation of ascorbic acid in aqueous solution across an elliptic micro-hole water/organic gel interface is demonstrated. This redox inactive sensing platform offers an alternative way for the detection of ascorbic acid to avoid a fouling effect which is one of the major concerns in redox based sensing systems. The detection principle is simply measuring the current change with respect to the assisted transfer of protons by a proton selective ionophore (e.g., ETH 1778) across the micro-hole interface between the water and the polyvinylchloride-2-nitrophenyloctylether gel phase. The assisted transfer reaction of protons generated from ascorbic acid across the polarized micro-hole interface was first characterized using cyclic voltammetry. An improved sensitivity for the quantitative analysis of ascorbic acid was achieved using differential pulse stripping voltammetry with a linear response ranging from 1 to $100\;{\mu}M$ concentrations of ascorbic acid. As a demonstration, the developed sensor was applied for analyzing the content of vitamin-C in different types of commercial pharmaceutical tablets and syrups, and a satisfactory recovery from these samples were also obtained.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.9
• /
• pp.1742-1746
• /
• 2008

Catechol and caffeine were simultaneously analyzed with a bismuth-immobilized carbon nanotube paste electrode (BPE) using square wave (SW) stripping voltammetry. Optimum analytical conditions were determined. Simultaneous working ranges of 100-1,500 $mgL^{-1}$ for caffeine and 5-75 $mgL^{-1}$ for catechol were obtained. In the separated cell systems, a working range of 0.1-2.1 $mgL^{-1}$ catechol with a correlation coefficient of 0.9935, and a working range of 10-210 $mgL^{-1}$ caffeine with a correlation coefficient of 0.9921 were obtained. A detection limit (S/N) of 0.15 $mgL^{-1}$ (7.7 ${\times}$ $10^{-7}$ M) and a detection limit of 0.02 $mgL^{-1}$ (1.82 ${\times}$ $10^{-7}$ M), respectively, manifested for catechol and caffeine. It was found that three macro-type electrode systems could be implanted in fish and rat neuro cells. For both ions, the ion currents were observed. The physiological impulse conditions and the neuronal thinking current were also obtained.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.198-205
• /
• 2003

The ammonium salt of nitrosophenylhydroxylamine, called cupferron, has been used not only as the ligand but also as an oxidizing agent for adsorptive catalytic stripping voltammetry (AdCtSV). Cyclic voltammetry was used for elucidating the electrochemical behavior of Os-cupferron complex in 1 mM phosphate buffer. The optimal conditions for osmium analysis were found to be 1 mM phosphate buffer solution (pH 6.0) containing 0.1 mM cupferron at scan rate of 100 mV/s. By using the plot of reduction peak currents of linear scan voltammograms vs. osmium concentration, the detection limit was $1.0{\times}10^{-7}M$.

• Toxicological Research
• /
• v.30 no.4
• /
• pp.311-316
• /
• 2014

For the detection of trace copper to be used in medical diagnosis, a sensitive handmade carbon nanotube paste electrode (PE) was developed using voltammetry. Analytical optimized conditions were found at 0.05 V anodic peak current. In the same conditions, various common electrodes were compared using stripping voltammetry, and the PE was found to be more sharply sensitive than other common electrodes. At optimum conditions, the working ranges of $3{\sim}19{\mu}gL^{-1}$ were obtained. The relative standard deviation of $70.0{\mu}gL^{-1}$ was determined to be 0.117% (n = 15), and the detection limit (S/N) was found to be $0.6{\mu}gL^{-1}$ ($9.4{\times}10^{-9}M$). The results were applied in detecting copper traces in the kidney and the brain cells of fish.