• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.606-611
• /
• 2014

Recently, LED lighting fixtures for crosswalk become popular in order to recognize the pedestrians at crosswalk, which can enhance the safety of the pedestrian at crosswalk. However, there are several problems related to the LED lighting fixtures for crosswalk, such as a lot of energy consumption due to a constant illumination during night and glaring of pedestrians at the opposite side of crosswalk. In this study, in order to overcome these problems, we have investigated a novel LED lighting fixture for crosswalk, which has two modules with different angles ($60^{\circ}$, $120^{\circ}$). Illuminance of min and max at four-line city street crosswalk shown 50 Lux, 125 Lux, respectively. Illuminance of min and max at eight-line city street crosswalk shown 150 Lux, 200 Lux, respectively. Simulation investigation was optimized design using optical program. Prototype was verified measurement by goniometer system.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.3
• /
• pp.61-67
• /
• 2011

This study examined the P Church in the Large chapel and S Church in the midium chapel were Analyzed to the installed stage broadcast lighting system. As a result of the installation of lighting equipment of LED class in P Church in the Large chapel, it provided clearer image and did not have shadow. While tungsten halogen illumination was very hot and heated to be preaching, LED was not heated so the pastor was very comfortable for preaching. S Church in the Midium chapel due to low ceiling height using LED lighting musical, theater and possibly were directed. If a similar structure of Dae-Hak Street theater to replace the existing fixtures by LED lighting, rendering effective and energy saving effect is thought to have much effect.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.51-58
• /
• 2011

The uniformity of lighting distribution on the roadway is essential factor for drivers and pedestrians's safety during nighttime in urban streets. Also, the importance of roadside trees is one of the growing concern for better citizens' health and mitigating environmental impact on the urban street. But roadway lightings and roadside trees have different design or planting standards and they are not integrated in the systemic viewpoint for better safety of users during nighttime. The purpose of this study is to propose a simulation approach which assesses lighting quality in the view of illumination uniformity distribution of roadway lighting from design step and consider the layout of roadside trees. For improving lighting quality of roadway, simulation approach is needed for assessing the impact of diverse planting situation of trees and encouraged from beginning of design step for roadway construction.

• Journal of the Korean Institute of Rural Architecture
• /
• v.11 no.3
• /
• pp.11-18
• /
• 2009

The purpose of this paper is to find out the investigation of overseas case in Street Furnitures of Public Design. Thus this research regions select among the waterfront cities; Tokyo/Yokohama(Japan), Nies/Cannes(France), Shanghai(China), Vancouver(Canada), in addition to the city of art and romance; Paris. Above all, it is necessary to study concept of public design and definition of street furnitures. The survey data collected from forenamed cities and the items of street furnitures are various installments such as kiosk, bench, bollard, litter-bin, sign board, toilet, bus/taxi station, fence, shelter, lighting column, fountain, telephone-booth, clock-tower, automaton, bicycle stand, playing object etc. In this study street spaces are analysed that is related to regional surroundings and pedestrian's culture. Consequently, design trend of street furniture in foreign case analysis are going into thoroughly modern image as well as checking of form, color, material and maintenance system. According to the above findings, this paper will provide basic data for establishing of the street furniture and improving of public design to the regional citizen, local government officials and regional experts.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.17-23
• /
• 2008

In this paper, we used "Double Photometric System for Road Lighting" and measured roadway lighting of the metropolitan area by a measurement of illuminance and luminance. As a result, so many roads were dissatisfied with the permitted range of roadway lighting because of the road shape, lighting method, trees lining a street and obstacles.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.273-280
• /
• 2017

In this paper, a freeform reflector is designed for low road lighting. In the case of low road lighting, which requires light distribution over a wide lane compared to the height, it is difficult to match uniformity, compared to existing road lighting. To satisfy road lighting grade M3, the reflector was divided into nine parts, and the inclination of the reflecting surface was changed to have the desired light distribution. The fitted curves were drawn based on each point, following the formula that was derived. Through the Street Light Simulation of LightTools, we confirmed that it meets the M3 road lighting standard; we then made it directly and satisfied the lighting grade on an actual road, proving the validity of the design result.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.314-321
• /
• 2024

Low road lighting is a lighting device that complements the shortcomings of existing pillar-type street lights. It is a lighting device that emits light from the side of the road surface and adjusts the luminance of the road surface like a light carpet. In this paper, to achieve full commercialization, we analyzed the luminance of the installed road surface and studied whether lighting could replace existing road lighting. In this study, the LMK (Luminance Measurement Camera) LABSOFT program was used to measure and analyze the surface luminance of road lighting, and the RELUX program was used to evaluate and analyze the simulation performance to determine light-based lighting conditions. A study was conducted to determine whether replacing pillar-type road lighting with low-level road lighting in a real environment would ensure comfortable and safe night vision for drivers at night.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.18-27
• /
• 2011

LED lighting because of high efficiency, long life, friendly environment, as a general lighting of the next generation, has been substituted for incandescent bulb and fluorescent lamp. The proposed system for use of solar battery is the intelligent controller for LED street lights which is improved the method of battery charging and charging efficiency in winter to extend battery life cycle, controlled lighting current according to SoC and in steps. Also, it is implemented emotional lighting which is controlled with the surrounding environment, by using colorful sub LED to take up 10[%] of a source of total light, white LED. As a lab results, the proposed system was implemented functions to adapt to the environmental changes, and improved the charging efficiency and battery life cycle.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.142-147
• /
• 2009

Conventional HP(high pressure) sodium or Metal-halide lamps have a life span of around one year requiring at least annual replacement and maintenance. High Power LED lights require no regular maintenance further increasing savings on replacement bulbs, access equipment and labour costs. New installations benefit from a substantial reduction in the cost of expensive heavy duty cable required for sodium lighting. Especially, LED light can achieve variable color temperature, high functional performance in the field of street light. There are two main method to achieve variable color temperature function of the street light. one method is using RGB multi-chip LED, the other is using Orange-White LED method. In this paper, it was compare RGB Multi-chip LED with white-orange LED for there characteristics performance.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.113-118
• /
• 2010

In this paper, We proposed remote dimming control system for Light Emitting Diode(LED) street light using Power Line Communication(PLC). LED will be used widly by indoor or outdoor lighting because of semi-permanent life and environment restriction. For energy saving of street light, the dimming control system is very necessary and the PLC is a very efficient technique. Thus, in this paper we proposed the remote dimming control system for LED street light using PLC. A performance of the proposed system was validated by experimental results.