• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.67-73
• /
• 2011

Handover in high speed mobile communication service, in particulary mobile WiMAX is supported efficiency mobility to 120km/h speed. But, in order to accommodate number of user increment in a cell, wireless network is increment to microcell and picocell by allocate bandwidth and by decrease cell size. handover is occurrent and increment connection failure ratio In this result. IEEE 802.16 standard is support seamless connection through handover optimization scheme. But because authentication process is abbreviate, network weakness is exposure. In this paper, we propose handover scheme for support realtime service as VoIP, Picure communication, Streaming Data Service in order to support partially encryption method. In experiment, proposed scheme is proof which process time is increment 20% more than previous scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3176-3183
• /
• 2011

Traffic and congestion control in the wireless sensor network is an important parameter that decides the throughput and QoS (Quality of Service). This paper proposes a transmission rate priority-based traffic control scheme to serve digital contents streaming in wireless sensor networks. In this paper, priority for transmission rate decides on the real-time traffic and non-real-time with burst time and length. This transmission rate-based priority creates low latency and high reliability so that traffic can be efficiently controlled when needed. Traffic control in this paper performs the service differentiation via traffic detection process, traffic notification process and traffic adjustment. The simulation results show that the proposed scheme achieves improved performance in delay rate, packet loss rate and throughput compared with those of other existing CCF and WCA.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.842-854
• /
• 2021

Performing industries in Korea and abroad have been attempting a wide range of artistic experiments utilizing online platforms ever since the Covid-19 pandemic. Accordingly, this study will shed light on the functional characteristics of Zoom, which was used as a creative tool for theater performances. At first, after examining theater performances presented in Korea and abroad using Zoom and their characteristics, the production stage of the Zoom play will be analyzed by dividing it into following stages; a research-based pre-production stage, a scene workshop stage that composes each scene based on the script, a recording stage filming each scene on Zoom, and Streaming stage for presenting the show. Furthermore, the actor's approaches to acting in this production process was presumed to be separation of gaze, re-recognition of space, utilization of expressive gestures, and reaction as an active action. As a result, it proposes the possibility of ongoing development of theatrical work using Zoom and the evolutionary aspect of actor's acting approaches in accordance with theatrical work via Zoom.

• Journal of the Korean Society of Combustion
• /
• v.8 no.2
• /
• pp.41-49
• /
• 2003

Ultrasonic field of 28kHz with sound pressure level 162dB has been employed to agglomerate the fine soot particle produces in a diffusion flame in a chamber. The agglomeration process has been investigated with digital camcorder and analysed in terms of the decrease of number density with exposure time. From the observation of agglomeration process, the initial agglomeration has been carried out during the short time, and it has been dominated by the orthokinetic collision. Thereafter, a slower agglomeration mechanism, driven by acoustic streaming in the chamber takes over and agglomeraters grew to diameters of several millimeters were levitated at the pressure node of the acoustic wave. And, the circular disk shape of large agglomeraters with the rotational and translational motion is observed.

• Journal of Information Technology Applications and Management
• /
• v.9 no.3
• /
• pp.1-12
• /
• 2002

Due to the fast development in computer and communication technologies, a video is now being more widely used than ever in many areas. The current information analyzing systems are originally built to process text-based data. Thus, it has little bits problems when it needs to correctly represent the ambiguity of a video, when it has to process a large amount of comments, or when it lacks the objectivity that the jobs require. We would like to purpose an algorithm that is capable of analyze a large amount of video efficiently. In a video, divided areas use a region growing and region merging techniques. To sample the color, we translate the color from RGB to HSI and use the information that matches with the representative colors. To sample the shape information, we use improved moment invariants(IMI) so that we can solve many problems of histogram intersection caused by current IMI and Jain. Sampled information on characteristics of the streaming media will be used to find similar frames.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.235-240
• /
• 2001

This study presents experimental work on phase change heat transfer, in order to increase heat transfer rate, ultrasonic vibrations were introduced. Solid-liquid phase change occurs in a number of situations of practical interest. This study reveal that ultrasonic vibrations accompany the effects like agitation, acoustic streaming, cavitation, and oscillating fluid motion. Such effects are a prime mechanism in the overall melting process when ultrasonic vibrations are applied. Some common examples include the melting of edible oil, metallurgical process such as casting and welding, and materials science applications such as crystal growth. Therefore, this study presented the effective way to enhance phase change heat transfer.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.529-537
• /
• 2017

Membrane filtration process is an advanced water treatment technology that has excellently removes turbidity and microorganisms. However, it is known that it has problems such as low economic efficiency and the operating stability. Therefore, this study was to evaluate on the economical feasibility and operational stability comparison of membrane and sand filtration process in Im-sil drinking water treatment plant. For the economic analysis of each process, the electricity cost and chemical consumption were compared. In the case of electric power consumption, electricity cost is $68.67KRW/m^3$ for sand filtration and $79.98KRW/m^3$ for membrane filtration, respectively. Therefore, membrane filtration process was about 16% higher than sand filtration process of electricity cost. While, the coagulant usage in the membrane filtration process was 43% lower than the sand filtration process. Thus, comparing the operation costs of the two processes, there is no significant difference in the operating cost of the membrane filtration process and the sand filtration process as $85.94KRW/m^3$ and $79.71KRW/m^3$ respectively (the sum of electricity and chemical cost). As a result of operating the membrane filtration process for 3 years including the winter season and the high turbidity period, the filtrated water turbidity was stable to less than 0.025 NTU irrespective of changes in the turbidity of raw water. And the CIP(Clean In Place) cycle turned out to be more than 1 year. Based on the results of this study, the membrane filtration process showed high performance of water quality, and it was also determined to have the economics and operation stability.

• Journal of Arbitration Studies
• /
• v.27 no.2
• /
• pp.59-81
• /
• 2017

The purpose of this study is to find a solution to disputes in the process of producing digital music sources. At present, the center of the world music market including the domestic market has been completely transformed from the tangible musical record market to the intangible sound source market. Due to these environmental changes, the music production process becomes industrialized and specialized, causing conflicts of interest among the individuals in the process. First of all, this study examined changes in the music market which is the background of the dispute, identified the problems of the process and suggested solutions while summarizing the meaning and role of each process of producing a sound source that may arise during the sound production process. This study covers plagiarism between producers, copyright infringement of the creator against assistant creator caused by the industrialization and division of the production environment, issues related to the rights of sound engineers whose role and importance become bigger as acoustic technology develops and music genres become more diverse, and vertical hierarchy due to the formation of oligopoly by several distributors with huge capital. As a result of the study, it was concluded that Alternative Dispute Resolution (ADR) system is suitable for solving these problems. Specific methods of using ADR include activation of the dispute settlement system of the Korea Copyright Commission, active use of the arbitration clause specified in the standard contract, and recalculation of labor costs and earnings from copyright through mutual negotiations. This paper can be differentiated from previous studies in that it studied overall problems that might arise in the process of digital music source production and suggested ADR utilization as the solution.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.4
• /
• pp.195-204
• /
• 2010

Due to improved wireless communication technologies, it is possible to provide multimedia streaming service for mobile device clients like PDAs and cellphones. Wireless networks are serviced on low bandwidth channels and mobile devices work on limited hardware specifications. In these conditions, transcoding technologies are needed to adapt the media for streaming services to given mobile environments. To transcode from the source media to the target media for corresponding grades, transcoding servers perform transcoding jobs as exhausting their resources. Since various transcoding loads occur according to the target transconding grades, an effective transcoding load balancing policy is required among transcoding servers. In addition to transcoding process, servers should maintain QoS streams for mobile clients for total serviced times. It requires real-time requirements to support QoS for various mobile clients. In this paper, a new transcoding load distribution method is proposed. The proposed method can be driven for fair load balance between distributed transcoding servers. Based on estimated transcoding time, movie information and target transcoding bit-rate, it provides fair transcoding load distribution and also performs admission control to support QoS streams for mobile clients.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1478-1490
• /
• 2011

Recently, multi-core processors have been drawing significant interest from the embedded systems research and industry communities due mainly to their potential for achieving high performance and fault-tolerance at low cost in such products as automobiles and cell phones. To process multimedia data, a scheduling algorithm is required to meet timing constraints of periodic tasks in the system. Though Pfair scheduling algorithm can meet all the timing constraints while achieving 100% utilization on multi-core based system theoretically, however, the algorithm incurs high scheduling overheads including frequent core migrations and system-wide synchronizations. To mitigate the problems, we propose a real-time scheduling algorithm for multi-core based system so that system-wide scheduling is performed only when it is absolutely necessary. Otherwise the proposed algorithm performs scheduling within each core independently. The experimental results by extensive simulations show that the proposed algorithm dramatically reduces the scheduling overheads up to as negligible one when the utilization is under 80%.