• Journal of the Korean Society of Food Culture
• /
• v.3 no.4
• /
• pp.391-396
• /
• 1988

The method for the measurement of texture hardening phenomena, which is the limiting factor of shelf-life of Yaksik in the market, was established. The changes in the hardening rate by the processing conditions and the storage temperature and time were examined. The standard sample made by traditional method could be kept at room temperature$(20{\circ}C)$ for 3 days and the multipuncture force measured at the end of marketable quality was 700g. The hardening rate increased rapidly by storing at $5^{\circ}C$ and the ratio of hardening rate constants between room temperature and $5^{\circ}C$ storage reached to $1.3{\sim}3.3$ depending on the processing condition. The largest ratio was observed by the sample made from pressure cooker. The addition of corn syrup retarded the hardening rate. The pressure cooking resulted in making too soft product, which diminished the panel preference, but it extend the shelf-life when products were stored at $5^{\circ}C$ microwave cooking resulted in making too hard texture which was not acceptable. The overall quality preference of Yaksik was decided by the textural preference and the latter showed significant inverse correlation with the maximum force of multipuncture test. Therefore, it was concluded that multipuncture test was useful for the measurement of the quality of Yaksik.

• Conservation Science in Museum
• /
• v.25
• /
• pp.1-8
• /
• 2021

This study investigated White Porcelain Water Dropper with Openwork Lotus Scroll Design and Eight Trigram Design in Cobalt-blue Underglaze (hereinafter, the "water dropper") in the collection of the National Museum of Korea using computed tomography (CT). A replica was produced to examine both the structure and its original production method. The CT scanning identified no joint lines or pores in the clay, which suggests that the body (the lower part of the water dropper) was shaped in a single piece using a mold and was then matched with a mold-formed lid (the upper part of the water dropper). The inner container of the body portion was roughly trimmed with a bamboo knife so that its upper surface could be securely attached to the bottom of the lid and prevent any leakage in the joined surface. It appears that the inner container for storing water was made first in a cylindrical shape that met the unit of quantity used at the time and could be easily formed by molding. It was transformed into a trapezoid shape during the process of combining it with the lid. A cylindrical inner container was reproduced using silicon 3D printing to compare its capacity with that of the original inner container. The comparison revealed that the reproduced container had a capacity of 152.5㎖, whereas the original container holds approximately 168.6㎖, a figure similar to three hop (around 174㎖) in Joseon-period units of quantity. Since the capacity of the cylindrical inner container corresponds to a known measure from the late Joseon dynasty, it is likely that the water dropper was originally produced to contain a cylindrical inner container.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.9
• /
• pp.283-290
• /
• 2023

With the recent steady development of IoT technology, it is widely used in medical systems and smart TV watches. 66% of software development is developed through language C, which is vulnerable to memory attacks, and acts as a threat to IoT devices using language C. A stack-smashing overflow attack inserts a value larger than the user-defined buffer size, overwriting the area where the return address is stored, preventing the program from operating normally. IoT devices with low memory capacity are vulnerable to stack smashing overflow attacks. In addition, if the existing vaccine program is applied as it is, the IoT device will not operate normally. In order to defend against stack smashing overflow attacks on IoT devices, we used canaries among several detection methods to set conditions with random values, checksum, and DSLR (random storage locations), respectively. Two canaries were placed within the buffer, one in front of the return address, which is the end of the buffer, and the other was stored in a random location in-buffer. This makes it difficult for an attacker to guess the location of a canary stored in a fixed location by storing the canary in a random location because it is easy for an attacker to predict its location. After executing the detection program, after a stack smashing overflow attack occurs, if each condition is satisfied, the program is terminated. The set conditions were combined to create a number of eight cases and tested. Through this, it was found that it is more efficient to use a detection method using DSLR than a detection method using multiple conditions for IoT devices.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.1027-1034
• /
• 2016

One of the most important purpose of multi-purpose reservoir is storing a large amount of water for utilization in a dry season. However, multi-purpose reservoirs that were constructed according to the limited hydrologic information available at the time of construction may encounter problems such as decreased water inflow due to climate change and an inability to cope with a water shortage. To solve these problems, in 2015, the Ministry of Land, Infrastructure and Transport suggested a revised water supply standard in case of water shortage for reservoirs. However, the revised standard has not been sufficiently discussed to determine its effectiveness. In addition, multi-purpose reservoirs in South Korea have secured and stored water for emergencies, but there is currently no way to utilize the stored water. Determining how to utilize the stored water effectively may be a useful method for preparing drought. Therefore, this article discusses the revised water supply standard as it relates to a water shortage in reservoirs and a method of utilizing the water stored for emergencies in multi-purpose reservoirs. The options for utilizing the water storage were evaluated using a water shortage safety degree index, and the results showed that the options may slightly and limitedly increase the water supply capacity. However, the evaluation also showed that a complex application of two options may overcome the exisiting problem and to supply water more effectively.

• Journal of KIISE:Software and Applications
• /
• v.31 no.11
• /
• pp.1439-1454
• /
• 2004

Recently, Levels of Information Systems Interoperability (LISI) that are used for assessing the information systems interoperability are defined according to the importance of interoperability among information systems. At that time, it is necessary to the construction of an assessment information repository to store and retrieve the interoperability assessment data efficiently. An LISI repository constructed for storing and retrieving an assessment information should support assessment systems that are developed in various Platforms and provide its functions by a standardized way. Business logics of LISI repository should be developed as distributed components, and we need to modify existing software design methods to show characteristics of LISI repository in addition to the standardized LISI data expression. Also a concrete method to recognize various implementation technologies and to apply them to implementation of LISI repository is needed. This paper provides a design method for developing an LISI repository that is considering the characteristics of LISI repository by three concerns, and an implementation scheme that can apply to the integration of the various repository implementation technologies systematically, as the LISI repository development framework for constructing the LISI repository. These help developers to construct the LISI repository effectively by providing concrete guidelines for considerations and appliable methods to construct the LISI repository.

• Journal of Sericultural and Entomological Science
• /
• v.53 no.1
• /
• pp.50-54
• /
• 2015

Mulberry fruit is common to keep a frozen storage because of the very high water content. Because freezing-storing cost is generated before the processing or sales, farmers of mulberry fruit production are weighted in financial burden. In addition, mulberry fruit has difficulty in expanding consumption by made in the simple processed products like the mulberry jam, mulberry juice, mulberry enzyme, alcohol, etc. Recent, frozen fruits including frozen blueberries, frozen strawberries, frozen mango, frozen rich, frozen mulberry fruit has been started to sell in the large discount stores and convenience stores. However, there is restricted sales in only special place that have the frozen distribution facilities. So, for the income improvement and consumption promotion of mulberry farmers facing these difficult situations, we developed the processing method of semi-dried mulberry fruit using the vacuum freezing dryer. The frozen mulberry fruit which was stored below $-40^{\circ}C$ is to dry in a vacuum freeze dryer, at $30{\sim}35^{\circ}C$, 23 ~ 24 hours. Semi-dried mulberry fruit seperated respectively. It had soft texture, and maintained shape, size and flavor. In particular, semi-dried mulberry fruit can be stored at room temperature.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.437-442
• /
• 2015

Recently, the size of point cloud is increasing rapidly with the high advancement of 3D terrestrial laser scanners. The study aimed for improving a file-referring octree, introduced in the preceding study, which had been intended to generate an octree and to query points from a large point cloud, gathered by 3D terrestrial laser scanners. To the end, every leaf node of the octree was designed to store only one file-pointer of its first point. Also, the point cloud file was re-constructed to store points sequentially, which belongs to a same leaf node. An octree was generated from a point cloud, composed of about 300 million points, while time was measured during querying proximate points within a given distance with series of points. Consequently, the present method performed better than the preceding one from every aspect of generating, storing and restoring octree, so as querying points and memorizing usage. In fact, the query speed increased by 2 times, and the memory efficiency by 4 times. Therefore, this method has explicitly improved from the preceding one. It also can be concluded in that an octree can be generated, as points can be queried from a huge point cloud, of which larger than the main memory.

• Tunnel and Underground Space
• /
• v.24 no.2
• /
• pp.155-165
• /
• 2014

Multiple thermal energy storage (TES) caverns can be used for storing thermal energy on a large scale and for a high-aspect-ratio heat storage design to provide good thermal performance. It may also be necessary to consider the use of multiple caverns with a reduced length when a single, long tunnel-shaped cavern is not suitable for connection to aboveground heat production and injection equipments. When using multiple TES caverns, the separation distance between the caverns is one of the significant factors that should be considered in the design of storage space, and the optimal separation distance should be determined based on a quantitative stability criterion. In this paper, we described a numerical approach for determining the optimal separation distance between multiple caverns for large-scale TES utilization. For reliable stability evaluation of multiple caverns, we employed a probabilistic method which can quantitatively take into account the uncertainty of input parameters by probability distributions, unlike conventional deterministic approaches. The present approach was applied to the design of a conceptual TES model to store hot water for district heating. The probabilistic stability results of this application demonstrated that the approach in our work can be effectively used as a decision-making tool to determine the optimal separation distance between multiple caverns. In addition, the probabilistic results were compared to those obtained through a deterministic analysis, and the comparison results suggested that care should taken in selecting the acceptable level of stability when using deterministic approaches.

• Clean Technology
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2020

According to the Korean Renewable Energy 3020 Implementation Plan, the installation capacity of renewable energy is expected to increase whereas technology for storing excess electricity and stabilizing the power supply of renewable energy sources is extremely required. Power-to-Gas is one of energy storage technologies where electricity is converted into gas fuel such as hydrogen and methane. Basically, Power-to-Gas system could be effectively utilized to store excess electricity generated by an imbalance between supply and demand. In this study, the economic feasibility analysis of Power-to-Gas reflecting the domestic situation was carried out. Total revenue requirement method was utilized to estimate the levelized cost of hydrogen. Validation on the economic analysis method in this study was conducted by comparison of the result, which is published by the International Energy Agency. The levelized cost of hydrogen of a 100-MW Power-to-Gas system reflecting the current economic status in Korea is 8,344 won kg^-1. The sensitivity analysis was carried out, applying the main analysis economic factors such as electricity cost, electrolyser cost, and operating year. Based on the sensitivity analysis, the conditions for economic feasibility were suggested by comparing the cost of producing hydrogen using renewable energy with the cost of producing natural gas reformed hydrogen with carbon capture and storage.

• Journal of Intelligence and Information Systems
• /
• v.14 no.4
• /
• pp.31-46
• /
• 2008

A stacking yard of a container terminal is a space for temporarily storing the containers that are carried in or imported until they are carried out or exported. If the containers are stacked in an inappropriate way, the efficiency of operation at the time of loading decreases significantly due to the rehandlings. The remarshaling is the task of rearranging containers during the idle time of transfer crane for the effective loading operations. This paper proposes a method of planning for remarshaling in a yard block of an automated container terminal. Our method conducts a search in two stages. In the first stage, the target stacking configuration is determined in such a way that the throughput of loading is maximized. In the second stage, the crane schedule is determined so that the remarshaling task can be completed as fast as possible in moving the containers from the source configuration to the target configuration. Simulation experiments have been conducted to compare the efficiency of loading operations before and after remarshaling. The results show that our remarshaling plan is really effective in increasing the efficiency of loading operation.