• Journal of Biosystems Engineering
• /
• 제12권1호
• /
• pp.31-38
• /
• 1987

In order to improve the traditional post harvest system in Korea, a model for mechanized rice drying and storage system was developed and introduced as the first part of the study(Park, 1986). As the second part of the study, capital requirement and cost of the model system was analyzed. Also, optimum size of the model system was estimated by comparing with the traditional harvest system. From the study, the following results can be concluded: 1. The capital requirement of the model system decreases as the model size increases. For example, a model system having 500 ton storage capacity requires 439,000 Won/ton. However it requires 313,200 Won/ton only, if the model size increases to 1000 ton. 2. Also, total cost of the model system decreases as the model size increases. For example, total costs of the model system having 500 ton and 1000 ton storage capacity are 101,208 Won/ton and 69,320 Won/ton, respectively. 3. The breakeven point (optimum size) of the model can be estimated around 630 ton storage capacity if the operation rate is assumed as 100%. However, the optimum size of the model is 710 ton, if the operation rate it assumed 80%.

• 한국지진공학회논문집
• /
• 제22권7호
• /
• pp.401-409
• /
• 2018

Performance-based seismic evaluation is usually done by considering simplified models for the liquid storage tanks therefore, it is important to validate those simplified models before conducting such evaluation. The purpose of this study is to compare the seismic response results of the FSI (fluid-structure interaction) model and the simplified models for the cylindrical liquid storage tanks and to verify the applicability of the simplified models for estimating failure probability. Seismic analyses were carried out for two types of storage tanks with different aspect ratios (H/D) of 0.45 and 0.86. FSI model represents detailed 3D fluid-structure interaction model and simplified models are modeled as cantilever mass-spring model, frame type mass-spring model and shell type mass-spring model, considering impulsive and convective components. Seismic analyses were performed with modal analysis followed by time history analysis. Analysis results from all the models were verified by comparing with the results calculated by the code and literature. The results from simplified models show good agreement with the ones from detailed FSI model and calculated results from code and literature, confirming that all three types of simplified models are very valid for conducting failure probability analysis of the cylindrical liquid storage tanks.

• 한국경영과학회지
• /
• 제38권1호
• /
• pp.1-13
• /
• 2013

Some systems such as missiles and ammunitions are used only one time in combat or emergency situation. Predicting correct storage reliability is very important for those systems which are inspected periodically. Many researches have been done for predicting the storage reliability using generally exponential or Weibull failure distribution. However, recent studies show the hazard functions follow various types of failure distributions. So in this paper, we proposed a generalized model that measures the storage reliability regardless of type of failure distributions. And this model reflects inspection error and failures that might be occurred during periodical check and within storage term as well.

• 한국수자원학회논문집
• /
• 제37권5호
• /
• pp.353-361
• /
• 2004

농업용 저수지의 유효저수량은 물수지 분석을 근거고 한 저수지 모의 운영을 통하여 결정하고 있다. 유역은 유출량에 관하여 고유한 특성을 갖고 있으므로 저수지에서 유효저수량의 결정은 유역으로부터의 유출량을 근거로 하는 것이 타당하다. 본 연구에서는 유역의 유출량을 근거로 한 추계학적 선형계획모형을 정립하고 저수지의 유효저수량을 분석하였다. 선형계획모형을 이용한 저수지 분석에 있어서 선형결정법칙은 Chance-constrained model과 함께 된 석년수와 관계없이 제약조건식을 줄이는데 기여한다. 경기도 안성시에 소재하고 있는 금광저수지를 대상저수지고 선정하여 유효저수량을 분석한 결과, 추계학적 선형계획모형에 의한 유효저수량은 물수지 분석에 의한 것 보다 크게 분석되었다. 본 연구에서 제시된 선형계획모형에 의하여 적정한 유효저수량을 결정하고, 저수지 모의운영을 통하여 결정된 유효저수량의 성능을 평가하는 것이 타당한 것으로 판단된다.

• 대한토목학회논문집
• /
• 제26권6B호
• /
• pp.623-631
• /
• 2006

본 연구에서는 하상변화가 존재하는 자연하천에서의 물질거동을 해석하기 위한 주기적저장대모형을 개발하였다. 저장대 구조에 따른 저장효과를 살펴보기 위하여 자연하천의 특성을 고려한 4개의 주기적 여울-소 구조를 갖는 와 흐름에서 소금물과 염료를 이용하여 실험한 모형실험결과를 이용하였다. 염료실험 결과, 물질이동 및 혼합거동은 하상 및 하안의 구조에 영향을 받는 것으로 나타났다. 기존의 저장대분산모형이 주기적으로 변화하는 저장대 구조에 의한 이동 및 질량교환 효과를 정확히 재현하지 못하는 것에 비해서 경계변화에 따른 질량교환 효과를 보다 효과적으로 재현할 수 있는 주기적저장대모형은 모형 실험 결과를 잘 재현하는 것으로 나타났다. 새로운 저장대모형을 미국 텍사스주의 Sabin River에 적용하였으며, 그 결과는 실험을 통해서 수집된 농도분포를 잘 재현하는 것으로 나타났다.

• 한국물환경학회지
• /
• 제26권6호
• /
• pp.1040-1048
• /
• 2010

An infiltration storage can be installed as a method of reducing runoff from catchment and increasing stream flow during the dry period by recharging groundwater. However, there is no proper model and method that can be used to design storage capacity of an infiltration storage in Korea. The purpose of the study is to evaluate capacities of infiltration storages planned on Jeju-do in Korea by modifying Storm Water Management Model (SWMM). The basic equations for the infiltration storage are same as those of the infiltration trench used in MIDUSS. Infiltration rates of the infiltration storages were first measured by double ring infiltrometers, and then the modified model was applied to evaluate adequacy for the capacities of three infiltration storages planned on Jeju-do in Korea. The application results show that the two infiltration storages with higher infiltration rates have adequate capacities to infiltrate the total water inflow to the storages. However, the other infiltration storage with lower infiltration rates has not sufficient capacity to infiltrate the total water inflow to the storage and release occurs to the downstream region. The simulation model and method applied can be used for capacity evaluation of future infiltration storages on highly pervious areas in Jeju-do.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.639-645
• /
• 2013

The aim of the study is to investigate the method to estimate a storage life of propelling charge on the decrease of muzzle velocity by stochastic gamma process model. It is required to establish criterion for state failure to estimate the storage life and it is defined in this paper as a muzzle velocity difference between reference value and maximum allowable standard deviation multiplied by 6. The relationship between storage time and muzzle velocity is investigated by nonlinear regression analysis. The stochastic gamma process model is used to estimated the state distribution and the life distribution for storage time for 155mm propelling charge KM4A2 because the regression analysis is a deterministic method and it can't describe the distribution of life for storage time.

• Journal of Information Processing Systems
• /
• 제5권1호
• /
• pp.11-18
• /
• 2009

As well as providing various APIs for the development of inference engines and storage models, Jena is widely used in the development of systems or tools related with Web ontology management. However, Jena still has several problems with regard to the development of real applications, one of the most important being that its query processing performance is unacceptable. This paper proposes a storage model to improve the query processing performance of the original Jena storage. The proposed storage model semantically classifies OWL elements, and stores an ontology in separately classified tables according to the classification. In particular, the hierarchical knowledge is managed, which can make the processing performance of inferable queries enhanced and stores information. It enhances the query processing performance by using hierarchical knowledge. For this paper an experimental evaluation was conducted, the results of which showed that the proposed storage model provides a improved performance compared with Jena.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.579-589
• /
• 1998

Full turnover-based storage policy (FULL) is often used to minimize the travel time needed to perform storage/retrieval operations in automated storage/retrieval systems (AS/RSs). This paper presents an approach for determining the required storage capacity for a unit load AS/RS under the FULL. An analytic model is formulated such that the total cost related to storage space and space shortage is minimized while satisfying a desired service level. To solve the model, some analytic properties are derived and based on them, an iterative search algorithm which always generates optimal solutions is developed. To illustrate the validity of the approach, an application is provided when the standard economic-order-quantity inventory model is used.

• 한국농공학회지
• /
• 제38권2호
• /
• pp.75-86
• /
• 1996

The formulas for estimating the constants of storage function model including K and TL for runoff analysis and a distributed storage function model are discussed in this study. First, the relations between parameters of the storage function model and the kinematic runoff model are theoretically examined, and then optimum constants of storage function model are obtained by the Standardized Davidson-Fletcher-Powell (SDFP) method. Through this analysis, theoretical formulas were obtained as $K = 0.63 {\alpha} KsB{^0.6}$ and $T_{L}=0.11 {\alpha} KsB{^0.6} r{^0.4} {_e}$, which are difficult to use practically because of the unclarified definition of shape factors. From a practical point of view, empirical formula were derived as $K=15.6{^0.3} {_m}$ and $T_{L}=2.1B{^0.36} {_m} {_e}/r{^0.4} {_e}$ for applied watersheds. The proposed formulas are verified for several recoded floods at a few points of watersheds. It is also found that the distributed storage function. can be applied to flood runoff analysis using the new formulas aboved mentioned.