• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.60-64
• /
• 2001

We have studied properties of step-edge Junction prepared with crystal orientation of sapphire substrate. The Step on sapphire substrates fabricated by conventional photolithography method and Ar ion milling method. $CeO_2$ buffer layer and in-situ YBCO thin film were deposited on the stepped sapphire substrates by a pulsed laser deposition method with the predetermined optimized condition. The step angle was centre fled low angle of about $25^{\circ}$. The YBCO film thickness was varied to obtain various thickness ratios of the film to the step height in a range from 0.7 to 1.2. I-V curves of junction were showed RSJ-behavior, double junction structure, and hysteresis due to the crystal orientation of substrate.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.790-793
• /
• 2009

In the case of projection type display, it needs to use the screen in order to project the image clearly and wide viewing angle. We have been developing the step in type display system using the smoke screen. However, the image with smoke screen was flickered by gravity and air flow. Then we considered to reduce the flicker of the image and we found that flicker can be reduced and viewing angle becomes more large. This time we report the large viewing angle step in type display system using screen made up with very small particle size smoke and flow controlled nozzle. Hence, at first we considered the most suitable particle for the screen and then the shape of screen and then we constructed the array of flow controlled smoke screen. By the results of experiment we could get considerably high contrast flicker-less image and get the viewing angle more than $60^{\circ}$ by this flow controlled nozzle attached new type smoke screen and make clear the efficiency of this method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.185-191
• /
• 1993

A flexible nanipulator can move in the high speed even with the small driving torque. The dynamic equations of flexible manipulator whichinclude 2 vibrationalmodes are derived using the clamped-free boundarycondition. Simulation results of the 6th order modelare well matched with experimental results. The hub angle of the flexible manipulator can be controlled without vibration of beam by the feedback of both hub angle and strain. The overshoot of the hub angle in the step resonse is reduced without sacrificing the rise time using the cycloidal function instead of the step function as the reference input.

• 한국통신학회논문지
• /
• 제33권9A호
• /
• pp.874-881
• /
• 2008

본 논문에서는 DS-SS 방식의 ISO/IEC 24730-2 RTLS 모뎀을 위한 주파수 동기 알고리즘을 제시한다. 제시하는 주파수 동기 알고리즘은 주파수 동기 획득 모드와 주파수 동기 추적 모드로 구성되며, 주파수 동기 획득 모드는 각도 추정과 검증 과정의 두 단계 과정을 통해 이루어진다. 각도 추정에서는 타이밍 간격에 따라 세 가지 경우로 나누어 각도를 추정하고, 검증 과정에서는 추정된 세 각도간의 이론적인 연계성을 이용하여 각도의 모호성을 제거하여 효과적인 주파수 동기화가 이루어지도록 하였다. 이러한 방식으로 구성된 주파수 동기 알고리즘의 이론적 해석과 시뮬레이션을 통한 성능 분석을 토대로 제시한 주파수 동기 알고리즘의 타당성을 검증하였다.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.497-504
• /
• 2017

This paper proposes a method to measure the airburst height by utilizing a high speed camera. This method might be applied to the test of which flight target is alive after the burst. The proposed method consists of four main steps. The first step is to compute the impact point using the sea surface height. The second step is to compute the height of burst (HOB) by using the distance from the camera to the impact point. This could be different from the real explosion height. That is because the distance from the camera to the burst point is not the same as it from the camera to the impact point. Therefore, the third step is to calculate the approach angle of the flight target with respect to the installed camera. Then, the last step is to compensate the computed height by using the approach angle. The result of the proposed method is compared with it from the triangulation. In this paper, the HOB error is also analyzed regarding the approach angle difference. Based on this analysis, the camera position might be suggested for error reduction.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.69-81
• /
• 2005

In this study using two-dimensional system of the analysis of image, when normal males in their twenties who have normal foot and step with heel first are walking and running, they who are wearing running shoes or barefoot are testing and comparing the exchange factors of heel control. There are following results of this test by verifying them with T-Test. 1) When they are running, there are two big different gap which is $6.05^{\circ}$ between barefoot and wearing the running shoes. The former is $174.79^{\circ}{\pm}6.31$ and the latter is $180.84^{\circ}{\pm}4.69$. But it is not statistically significant. The angle of first step with heel is $100.42^{\circ}{\pm}3.95$ with barefoot and $93.97^{\circ}{\pm}094$ with wearing the running shoes. In this case, it is statistically significant(p<.01) 2) When they are running, the angle of the Achilles' tendon has different gap which is $5.24^{\circ}$ between barefoot and wearing the running shoes. The former is $179.70^{\circ}{\pm}4.23$ and the latter is $184.94^{\circ}{\pm}4.09$. It is not statistically significant. The angle of minimal step with heel is $96.30^{\circ}{\pm}3.07$ with barefoot and $90.84^{\circ}{\pm}0.44$ with wearing the running shoes. In this case, it is statistically significant(p<.01). 3) In the angle of the Achilles' tendon and the angle of first step with heel, when they are walking, the angle of the Achilles' tendon has different gap which is $1.81^{\circ}$ between barefoot and wearing the running shoes. The former is $6.39^{\circ}{\pm}0.83$ and the latter is $8.20^{\circ}{\pm}1.85$. It is not statistically significant. The angle of first step with heel is $2.32^{\circ}{\pm}0.51$ with barefoot and $3.22^{\circ}{\pm}1.44$ with wearing the running shoes. It is not statistically significant. 4) In the angle of the take-off of Achilles' tendon, when they are walking, the angle of the take-off of Achilles' tendon has different gap which is $3.88^{\circ}$ between barefoot and wearing the running shoes. The former is $177.62^{\circ}{\pm}8.78$ and the latter is $173.74^{\circ}{\pm}16.31$. It is statistically significant(p<.05). Therefore, they are running, the angle of the take-off of Achilles' tendon is $178.37^{\circ}{\pm}19.28$ with barefoot and $171.26^{\circ}{\pm}12.18$ with wearing the running shoes. It is statistically significant(p<.05).

• 대한정형도수물리치료학회지
• /
• 제18권2호
• /
• pp.41-47
• /
• 2012

Background: This study was designed to investigate the correlation between electromyography (EMG) activities in the vastus medialis oblique (VMO) vs vastus lateralis (VL) activity ratio and the valgus collapse knee position while stepping down. Methods: Twenty healthy women volunteered to participate in this study. We measured the frontal-plane projections of the knee valgus angle, knee valgus distance, and hip adduction angle by using a digital camcorder. After 3 repetitions of the step down (dominant side) exercise, the findings of the static and dynamic phases were analyzed. EMG activities data of the VMO:VL activity ratio were recorded during the step down exercise and were normalized to the maximal voluntary isometric contraction (MVIC) of the quadriceps. A paired t-test was used to compare the findings of the static and dynamic phases. We analyzed the Spearman's rank order correlation coefficient between the and VMO:VL ratio. Results: Hip adduction angle, knee valgus angle, VMO activity, VL activity, VMO:VL activity ratio were statistically higher in the dynamic phase than in the static phase (p<.05). Frontal-plane projections of knee valgus angle were significantly correlated with hip adduction angle (r=.459, p<.05) and knee valgus distance (r=.505, p<.05). However, the EMG activity ratio of the VMO and the VL did not show a significant change during step down exercise with respect to hip adduction angle (p=.875), knee valgus angle (p=.618), and knee valgus distance (p=.701). Conclusion: The results from this study indicate that frontal-plane projections of knee valgus angle were associated with hip adduction angle and knee valgus distance. On the basis of these results, the knee valgus distance may be used to determine the valgus collapse knee position while stepping down.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.147-151
• /
• 1999

YBCO step-edge Josephson junction were fabricated on sapphire substrates. The steps were formed on R-plane sapphire substrates by using Ar ion milling with PR masks. The step angle was controlled in the wide range from 25$^{\circ}$ to 50$^{\circ}$ by adjusting both the Ar ion incident angle and the photoresist mask rotation angle relative to the incident Ar ion beam. CeO$_2$ buffer layer and in-situ YBa$_2Cu_3O_{7-{\delta}}$ (YBCO) thin films was deposited on the stepped R-plane sapphire substrates by pulsed laser deposition method. The YBCO film thickness was varied to obtain the ratio of film thickness to step height in the range from 0.5 to 1. The step edge junction exhibited RSJ-like behaviors with I$_cR_n$ product of 100 ${\sim}$ 300 ${\mu}$V, critical current density of 10$^3$ ${\sim}$ 10$^5$ A/ cm$^2$ at 77 K.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.150-150
• /
• 2010

질화물 기반의 LED의 경우 c-plane 사파이어에 GaN을 성장 하는 방법이 많이 연구되어 왔다. 그러나 c-plane 위에 성장시킨 LED는 분극현상이 발생하여 양자효율의 저하와 발광파장의 적색 편이를 야기한다[1]. 이런 문제를 해결하기 위하여 a-plane (11-20), m-plane (10-10) 등의 비극성면을 갖는 GaN을 성장을 통해 분극문제를 해결하고자 하는 방법이 제안되었다 [2] 하지만, 현재 비극성 면을 갖는 고품질의 박막을 성장시키기 어렵다는 단점이 존재한다. 고품질의 박막을 성장시키는 방법으로는 ELO와 다중 버퍼층의 사용처럼 여러가지 방법이 연구되고 있다. 하지만 사파이어의 tilt와 열처리에 따른 표면 개질에 대한 연구는 많이 진행되어지고 있지 않다. 본 연구에서는 사파이어에 열처리를 통하여 표면의 특성 변화를 관찰하고 이를 이용하여 고품위 GaN 박막의 품질을 높이려 하였다. r-plane 사파이어에 유기금속화학증착법(MOCVD)을 이용하여 a-plane GaN을 성장하였다. 이 공정에서 사용한 pre-treatment는off-axis angle을 가진 기판의 표면 열처리이다A-plane GaN 성장전에 m-direction으로 off-axis angle을 가진 r-plane 사파이어 기판을 1300도로 가열한 후 각각의 다른 시간에서 열처리를 진행하였다. Off-axis angle을 가진 사파이어는 표면에 step구조를 가지고 있으며, 이 step의 width를 비롯한 표면의 morphology는 off-axis angle에 따라 달라진다. Off-axis angle을 변화시킨 사파이어를 1300도에서 1시간, 3시간, 5시간 annealing하여 표면을 AFM을 사용하여 관측한 결과 step width가 증가하고 step의 형태가 뚜렷해지며 rms-roughness가 변화한 것을 관찰할 수 있었다. 그리고 이 각각의 기판을 동일한 조건으로 a-plane GaN을 성장하여 박막의 특성을 측정하였다. 본 발표에서는 사파이어 기판의 표면 처리에 따른 비극성 GaN의 특성 변화에 대한 분석 결과를 논의할 것이다.

• Progress in Superconductivity
• /
• 제2권2호
• /
• pp.81-85
• /
• 2001

Uniformity of critical currents of YBa$_2$Cu$_3$O$_{7}$ step-edge Josephson junctions on SrTiO$_3$(100) substrates have been studied at various step-line angles. 15 identical junctions were made in series on each substrate that has a long straight step-edge line. Step-line angles studied were 0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$, and 45$^{\circ}$with respect to the crystal major axes of the substrate. Scattering of junction critical currents among the junctions on the same substrate increased with the step-line angle. Current-voltage curves showed standard resistively-shunted-junction (RSJ) characteristics in most of the 0$^{\circ}$junctions. However, the number of junctions showing RSJ behavior decreased with increasing step-line angle. Variations of detailed microstructure of the step-edge among junctions, which are coupled with the d-wave symmetry of YBa$_2$Cu$_3$O$_{7}$, are believed to be the main cause for the nonuniformity in the critical current.ent.