• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.281-290
• /
• 2020

The purpose of this study was to determine the optimal planting density for Zelokva serrata plantations. The study sites were located in Gyeongsan (GS) and Sunchang (SC), Korea. One-year-old, bare-root seedlings were planted at densities of 3,000; 5,000; 7,000; and 10,000 trees ha^-1 at the end of March 2015. We measured the root collar diameter and height each September from 2015 to 2019, and then calculated the H/D ratio and stem volume. The root collar diameter and height increased with increased planting density, and the stem volume was significantly higher at 10,000 trees ha^-1 than those at the other planting densities. Planting density did not affect the survival rate or H/D ratio. The root collar diameter, height, and stem volume were higher in GS than those in SC five years after planting. This study highlights that early growth performance was improved at increased planting densities at both sites. This study suggests that the initial planting density of 10,000 trees ha^-1 is suitable to improve the early growth performance of Z. serrata plantations, and that the improved growth performance at higher planting densities may be a silvicultural characteristic of Z. serrata.

• Journal of Bio-Environment Control
• /
• v.6 no.1
• /
• pp.15-25
• /
• 1997

Plug seedlings of bell pepper(Capsicum annuum L.) were grown for 50 days in controlled environment chambers under 12 hrs per day photoperiodic condition with sixteen different day and night temperature regimes to investigate the possibility of height control. The seedlings were then transplanted to greenhouse to investigate the growth, flowering, and yield afterward. Plant height and stem length of seedlings were mainly affected by day temperature rather than night temperature. Internode elongation was suppressed by a negative DIF and was enhanced by a positive DIF even with the same average daily temperature (ADT). Leaf unfolding rate was influenced more by ADT than by DIF. Fresh and dry weights increased as ADT increased. Leaf area and stem diameter increased until temperature increased up to 24$^{\circ}C$ day and night temperature and decreased above 24$^{\circ}C$, The position at which the first flower was initiated was lowered as ADT increased. The first flower degeneration was not obvious up to 24$^{\circ}C$ ADT but increased rapidly above 24$^{\circ}C$ ADT. Seedling compactness(Dry weight per plant height :mg.mm$^{-1}$ ) was greater under -DIF than +DIF condition. In conclusion, DIF treatment was an applicable technique to control stem elongation and growth rate such as leaf unfolding rate and position at which first flower was initiated could be controlled by ADT.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.351-354
• /
• 2010

This study was carried out to develop a new sweet sorghum for biomass by using mutagen, gamma-ray. Seeds treated were gained from National Genetic Resource Center, RDA, and these seeds were irradiated with gamma-ray (400Gy) at KAERI. CNUS-M113 and CNUS-M134 among 169 collected accessions were evaluated a promising line for biomass due to increasing of fresh and dry weight. In addition, this line was high in stem height, number of tiller and fresh weight per plant than check, Hwang-gum chal sorghum. Accordingly, this line demanded for leading variety the production test and cultivation adaptability in future years.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.1
• /
• pp.49-53
• /
• 2013

This study was performed to evaluate the adaptability of farm field soil transplanting and habitat growth in inland and seashore areas of Artemisia capillaris in South Korea. In habitat, Artemisia capillaris was distributed both in the inland and seashore area as hemicryptophyte, and it grows individually on the slope of the open sunlight. The inland and seashore soils of habitat was the slightly acid and weakly alkaline, respectively. Plant height was 55.6 cm, and it was higher in inland than that of the seashore area. The stem and branch number was less in inland than that of the seashore area. Flowering period was mid-August, and flower of inland blossomed early 1 ~ 3 days than that of the seashore area. The flowering and fruiting rate was slightly lower in inland than that of the seashore area. After transplanting of Artemisia capillaris, plant height was 71.7 cm, and it was higher 16.1 cm than that of the habitat. The stem and branch number was more than that of the habitat, and flower blossomed early 3 ~ 4 days than that of the habitat. Transplanting survival rate was 85.1%, it was slightly higher in inland than that of the seashore area.

• Korean Journal of Plant Resources
• /
• v.33 no.6
• /
• pp.586-596
• /
• 2020

Chionanthus retusus has been used for landscaping and gardening trees, foods and medicines. This study was carried out to analyze the effect of fertilization on the growth performance of container seedlings (1-year-old) in C. retusus. We used multifeed 19 (MF) as a fertilizer, and measured the height, root collar diameter (RCD), biomass, seedling quality index (SQI) chlorophyll contents and chlorophyll fluorescence of the seedlings. The findings of this paper showed that the height, RCD, H/D ratio, T/R ratio and the fresh and dry weight of seedlings increased after fertilization. The moisture content of the stem and root did not show any significant difference among fertilizations, except in the case of the leaf. Production distribution such as the dry weight ratio of leaves and the stem dry weight ratio of fertilized seedlings had a higher value than that of non-treatment. SQI was the highest in MF 1,000 mg/L and 2,000 mg/L treatment. Chlorophyll contents (SPAD value) also increased with the increase in fertilization concentrations. Chlorophyll fluorescence (F_v/F_m) showed the highest value of 0.8 in MF 2,000 mg/L treatment.

• Journal of Korean Society of Forest Science
• /
• v.3 no.1
• /
• pp.28-31
• /
• 1963

Recognizing shortcomings and unreasonable points of the usual methods of measurement of the standing-tree volume, author contrived measurement formula of standing-tree volume which is based on stem-curve equation, $y^2=2px$, resulted from the analysises and experiments on stem-curve by differentiation & integration. The results of this study are as follows ; (1) The following is the formula. $V=1/2g_{1.2}$(h+1.2) V=volume of tree $g_{1.2}$ = sectional area at breast heigh h = height of tree (2) So plain is the form of this formula that this formula is more convenient than usual formulas in measuring. (3) The percentage error of this formula is negative and it is remarkably superior to usual formulas except Pressler's formula, in other words, the higher the tree that is measured is, the more inaccurate become pressler's formula, and the percentage error of the breast-height form factor method is direct proportion to the grossness of the tree that is measured, but the higher the tree that is measured, the lower become percentage error of this formula in geometrical progression.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.68-74
• /
• 2003

Kenaf(Hibiscus cannabinus L.) cultivar, Tainung 2, had been grown for 152 days at the experimental farm of Jinju National University, Gajoa-dong, Jinju-si, Kyongnam, Korea. The planting, growth rate, fertilization and structural characteristics as well as the cultivation and growth characteristics of kenaf, and the product usage were investigated. The narrowest diameter at kenaf bottom was 10 mm, the widest 42 mm and the average about 28 mm, and the shortest height 150 cm, the tallest 480 cm and the average about 350 cm. The weight of a core fraction was 68.1％ and a bast fraction 31.9％. The weight ratio of core material to bast fiber was 2.31. The weight ratio of dry stem was 73.5％ and that of leaves 26.5％. The weight of dry plant produced in 1 $m^2$ was 1,467 g, and about 1,052 g of stem could be used for the commercial purpose, The application of fertilizers resulted in the increase of the growth rate of the diameter at plant bottom and the height. Bast fiber, phloem ray and cortex parenchyma cell were observed in bast, and vessel, wood fiber and ray in core.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.237-251
• /
• 2021

The main purpose of this study is to investigate the performance of the proposed hybrid teaching-learning based optimization algorithm on the optimum design of reinforced concrete (RC) cantilever retaining walls. For this purpose, three different design examples are optimized with 100 independent runs considering continuous and discrete variables. In order to determine the algorithm performance, the optimization results were compared with the outcomes of the nine powerful meta-heuristic algorithms applied to this problem, previously: the big bang-big crunch (BB-BC), the biogeography based optimization (BBO), the flower pollination (FPA), the grey wolf optimization (GWO), the harmony search (HS), the particle swarm optimization (PSO), the teaching-learning based optimization (TLBO), the jaya (JA), and Rao-3 algorithms. Moreover, Rao-1 and Rao-2 algorithms are applied to this design problem for the first time. The objective function is defined as minimizing the total material and labor costs including concrete, steel, and formwork per unit length of the cantilever retaining walls subjected to the requirements of the American Concrete Institute (ACI 318-05). Furthermore, the effects of peak ground acceleration value on minimum total cost is investigated using various stem height, surcharge loads, and backfill slope angle. Finally, the most robust results were obtained by HTLBO with 50 populations. Consequently the optimization results show that, depending on the increase in PGA value, the optimum cost of RC cantilever retaining walls increases smoothly with the stem height but increases rapidly with the surcharge loads and backfill slope angle.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.357-363
• /
• 2019

This study was conducted to develop a stem volume table for Quercus acutissima in Korea by using Kozak's stem taper equation. In total, 2700 tree samples were collected around the country, and growth performance was investigated through compiling data on diameters by stem height and stem analysis. In order to test the stem taper equation's fitness, the fitness index (FI), bias, and mean absolute deviation (MAD) were analyzed. The fitness of the equation was estimated at 97%, bias as 0.017, and MAD turned out to be 1.118, respectively. Furthermore, there was a statistically significant volume difference between the current volume table and the new volume table (p = 0.0008, <0.005). The result indicates that using the new volume table that reflects the actual forest will reduce the loss when assessing wood resources and will improve the accuracy of forest statistics for national and local governments. A stem volume table, the main result of this research, which is utilized in the estimated stem taper equation, will provide growth information for Quercus acutissima, one of the main broadleaf species in Korea, and will function as a management indicator for rational forest management.

• Journal of Ecology and Environment
• /
• v.37 no.4
• /
• pp.177-184
• /
• 2014

This study was conducted to develop allometric equations and to determine the stem density and biomass expansion factor (BEF) for the estimation of the aboveground and belowground biomass of Cryptomeria japonica in Jeju Island, Korea. A total of 18 trees were harvested from the 40-year-old C. japonica stands in Hannam experimental forest, Jeju Island. The mean biomass of the C. japonica was $50.4Mg\;ha^{-1}$ in stem wood, $23.1Mg\;ha^{-1}$ in root, $9.6Mg\;ha^{-1}$ in branch, $4.6Mg\;ha^{-1}$ in needle and $4.3Mg\;ha^{-1}$ in stem bark. The diameter at breast height (DBH) was selected as independent variable for the development of allometric equations. To evaluate the performance of these equations, coefficient of determination ($R^2$) and root mean square error (RMSE) were used and results of the evaluation showed that $R^2$ ranged from 71% (root biomass equation) to 96% (aboveground biomass equation) and the RMSE ranged from 0.10 (aboveground biomass equation) to 0.33 (root biomass equation). The mean stem density of C. japonica was $0.37g\;cm^{-3}$ and the mean aboveground BEF was $1.28g\;g^{-1}$. Furthermore, the ratio of the root biomass to aboveground biomass was 0.32.