• 한국산림과학회지
• /
• 제34권1호
• /
• pp.21-30
• /
• 1977

일본잎갈나무는 우리나라의 주요조림수종(主要造林樹種)으로 전국각지(全國各地)에 많은 조림지(造林地)와 임분(林分)이 있다. 이 수종(樹種)의 임분밀도관리(林分密度管理)의 지침(指針)을 마련하여 생산력예측(生產力豫則), 간벌계획(間伐計劃)과 수확량(收穫量) 사정(査定)을 용이하게 하는 일은 임업기술(林業技術)의 계량적(計量的), 생태적(生態的) 및 경제적(經濟的) 관점(觀點)에 대단(大端)이 의의있는 일로 생각 되었다. 이 연구(硏究)를 위해 정상적(正常的)으로 관리(管理)되고 있든 비정상적(非正常的)으로 관리(管理)되고 있든 최근(最近)에 간벌(間伐)한 흔적이 없는 임분(林分)에서 165개(個)의 표본(標本)을 조사(調査)하여 평균수고(平均樹高), 평균직경(平均直徑) 우세목수고(優勢木樹高), ha당(當) 본수(本數)와 1평균목(平均木)의 간재적(幹材積)을 산출(算出) 하였다. 이 연구(硏究)에 특(特)히 세장도이론(細長度理論)을 새로 도입(導入) 하였다. 이 이론(理論)에 대(對)한 실험적(實驗的) 검토(檢討)는 마(馬)와 Wardle, Shantz, Harms & Colline의 밀도시험결과(密度試驗結果)를 인용(引用)하여 증명한 바 있다. 임목(林木)의 상대생장(相對生長)은 일반적(一般的)인 logistic cnrve를 인용(引用)하고 공식(公式)은 모두 $Y=a{\times}b$를 대입(代入) 하였다. 각측정인자간(各測定因子間)의 관계(關係)는 아래와 같았다. 1. 세장도별(細長度別) 수고(樹高)와 밀고(密度)와의 관계(關係)-표(表) 1과 그림2 2. 세장도별(細長度別) 직경(直徑)과 밀도(密度)와의 관계(關係)-표(表) 1과 그림3 3. 세장도별(細長度別) 수고(樹高)와 단목간재적(單木幹材積)과의 관계(關係)-표(表) 3과 그림4 4. $D^2H$와 단목(單木) 간재적(幹材積)-$Log_eV=0.9569\;Log_eD^2H-9.8431$ 5. 밀도(密度)와 간재적(幹材積)-$Log_eV=9.5026-1.6800\;Log_eD$ 6. 밀도(密度)와 간재적(幹材積)-$Log_eV_{ha}=9.4911-0.6784\;Log_eD$ 7. 세장도별(細長度別) 수고계급(首告階級)에 응대(應對)한 간재적(幹材積)-표(表) 5 8. 세장도별(細長度別) 수고계급(首告階級)에 응대(應對)한 Ha당(當) 본수(本數)-표(表) 6 9. 세장도별(細長度別) 수고계급(首告階級)에 응대(應對)한 Ha당(當) 간재적(幹材積)-표(表) 7 이상(以上)의 과정(過程)을 거쳐 일본잎갈나무 임분밀도관리도표(林分密度管理圖表)를 제작(製作)하였다(그림 9). 이 관리표(管理表)의 정확도(正確度)를 검정하기 위하여 실측치(實測値)와 추정치(推定値)와의 관계(關係)를 보니 표(表) 8의 내용과 같이 오차(誤差)가 낮은편이었다. 이 도표(圖表)는 일본잎갈나무 임분(林分)의 밀도관리(密度管理)의 지침(指針)이 되리라 생각 된다.

• 한국산림과학회지
• /
• 제99권6호
• /
• pp.914-921
• /
• 2010

본 연구는 충남지역에서 소나무림 분포가 가장 넓은 청양군과 보령시 국유림 내의 소나무임분을 대상으로 지상부와 지하부 바이오매스, 순생산량, 줄기밀도, 바이오매스 확장계수 등을 조사 분석하였다. 청양지역과 보령지역 소나무림의 임목 전체 건중량과 단위면적당 지상부 건중량은 각각 122.36 kg, 137.68 kg으로 나타났고, 72.23 Mg/ha, 143.27 Mg/ha으로 나타났으며, 지하부를 포함한 임목전체 건중량은 91.77 Mg/ha, 178.98 Mg/ha으로 나타났다. 또한 청양지역의 지상부 순생산량은 8.69 Mg/ha로 임목전체에서는 10.03 Mg/ha으로 나타난 반면에, 보령지역은 16.00 Mg/ha와 18.66 Mg/ha으로 나타났다. 두 지역의 바이오매스와 순생산량의 차이는 임분밀도와 지위의 차이에 의한 것으로 판단되었다. 줄기밀도(g/$cm^3$)는 각각 0.457, 0.421로 나타났고, 바이오매스 확장계수는 지상부와 지하부를 포함하여 각각 1.394~1.662, 1.324~1.639의 범위로 나타났다. 따라서 본 연구 결과로 얻어진 줄기밀도와 바이오매스 확장계수 값들은 충남지역 소나무림의 바이오매스 및 탄소흡수량을 추정하는데 기초적인 정보를 제공할 것으로 사료된다.

• 한국자원식물학회지
• /
• 제7권2호
• /
• pp.143-147
• /
• 1994

The experiment was carried out to study the influence of planting densities and on some agronomic characters and yield of rresh weight in Agastache rugoso. The results obtained are summarized as fol-lows; stem length was long in dense planing and short in spacious Planting. Stem diameter was thickIn spacious planting, and was thin in dense planting. Yield was higher in dense planting densities (20x20cm : 2spiants/m, 30$\times$20cm : 17plants/m).

• Journal of Biosystems Engineering
• /
• 제21권3호
• /
• pp.315-324
• /
• 1996

This study was one of a series of studies on application of machine vision and image processing to extract the geometrical features of plants and to analyze plant growth. Several algorithms were developed to measure morphological properties of plants and describing the growth development of in-situ lettuce(Lactuca sativa L.). Canopy, centroid, leaf density and fractal dimension of plant were measured from a top viewed binary image. It was capable of identifying plants by a thinning top viewed image. Overlapping the thinning side viewed image with a side viewed binary image of plant was very effective to auto-detect meaningful nodes associated with canopy components such as stem, branch, petiole and leaf. And, plant height, stem diameter, number and angle of branches, and internode length and so on were analyzed by using meaningful nodes extracted from overlapped side viewed images. Canopy, leaf density and fractal dimension showed high relation with fresh weight or growth pattern of in-situ lettuces. It was concluded that machine vision system and image processing techniques are very useful in extracting geometrical features and monitoring plant growth, although interactive methods, for some applications, were required.

• 한국식품영양과학회지
• /
• 제20권2호
• /
• pp.167-172
• /
• 1991

The contents of dietary fiber and its physical properties of vegetables were determined. The samples selected in this study were soybean sprouts (Glycine max MERILL sprouts) butterber (Petasites japonicus MIQ), taro stem(Colcasia antiquorum SCHOTT stem), bracken (Pteridium aquilinum KUHN)and dried Korean cabbage leaves(Brassica compestris L.leaves). The contents of dietary fiber were 20.96~50.62% of neutral detergent figer, 10.60-38.19% of acid detergent fiber, 1.74-10.88% of lignin, 5.79~33.29% of hemicellulose and 5.79-33.29% of cellulose. Butterber had the highest dietary fiber content. Mean waterholding capacity of samples was 5.65-12.26g.water/g.acetone dried powder and butterber and dried Korean cabbage leaves had higher water holding capacity value than the others. Densities were 140-250mg/ml of direct density and 385-417 mg/ml of bulk density.

• BMB Reports
• /
• 제47권8호
• /
• pp.439-444
• /
• 2014

Inhibition of an increase of osteoclasts has become the most important treatment for osteoporosis. The CXCR4 antagonist, AMD3100, plays an important role in the mobilization of osteoclast precursors within bone marrow (BM). However, the actual therapeutic impact of AMD3100 in osteoporosis has not yet been ascertained. Here we demonstrate the therapeutic effect of AMD3100 in the treatment of ovariectomy-induced osteoporosis in mice. We found that treatment with AMD3100 resulted in direct induction of release of SDF-1 from BM to blood and mobilization of hematopoietic stem/progenitor cells (HSPCs) in an osteoporosis model. AMD3100 prevented bone density loss after ovariectomy by mobilization of HSPCs, suggesting a therapeutic strategy to reduce the number of osteoclasts on bone surfaces. These findings support the hypothesis that treatment with AMD3100 can result in efficient mobilization of HSPCs into blood through direct blockade of the SDF-1/CXCR4 interaction in BM and can be considered as a potential new therapeutic intervention for osteoporosis.

• Journal of Yeungnam Medical Science
• /
• 제37권1호
• /
• pp.40-46
• /
• 2020

Background: Postoperative pain occurring after hip arthroplasty has become common since the expanded use of cementless femoral stems. The characteristic pain develop in the anterolateral thigh area. This study aimed to predict anterior thigh pain based on the measurements of postoperative anteroposterior (AP) and lateral (Lat) radiographs of the hip joint. Methods: The present study included 26 patients (29 hips) who underwent total hip replacement or bipolar hemiarthroplasty between March 2010 and May 2016, whose complete clinical information was available. AP and Lat radiographs of the affected hip were taken on the day of surgery and 1 and 6 months postoperatively. Patients with improper radiographs were excluded. The distance from the femoral stem to the nearest cortical bone in the distal region of the stem was measured. The patient group with a visual analog scale (VAS) score of ≥6 points was designated as patients with anterior thigh pain. Results: Sex, age, weight, height, body mass index, and bone mineral density in the lumbar spine and femur did not have a significant effect on postoperative VAS scores (p>0.05). Presence of contact between the femoral stem and cortical bone was associated with postoperative anterior thigh pain. Conclusion: Hip AP and Lat radiographs are usually taken to confirm fixation and alignment of the femoral stem after hip arthroplasty. The measurement method introduced in this study can be utilized for predicting anterior thigh pain after hip arthroplasty.

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.26-33
• /
• 1990

To study the wood quality factors of Populus nigra $\times$ maxmowiczii known a rapidly growing species, the variations of green moisture contents, bulk density, wood fibre dimensions, microfibril angles, and number of leaf knot in stem wood were investigated. The heartwood contained a higher moisture content than the corresponding sapwood. Bulk density in radial patterns variations decrease outward from the pith, then increase toward the bark. The wood-fiber length and diameters had somewhat smaller values than on Populus alba $\times$ glandulosa or Populus euramericana. The microfibril angles decreased rapidly toward the outside, and their mean values were about 16 degree. The grain angles run nearly parallel to the cell axies. Number of leaf knot showed a fluctural change above ground level to a point near the base of the crown and then increased rapidly to the top of tree and average number of leaf knot varied exclusively from tree to tree.

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.178-183
• /
• 2014

The objective of this study is to find out the effect of yeast on hair loss treatment and the role of hair follicle stem cell activator, which is important in hair growth. The authors have recently produced a substance, which has no disgusting odor, does not precipitates and does not easily corrupt, to use instead of yeast acquired from raw rice wine(Makgeolli). The substance is named Yeast Constituent Extract(YCE). In this research, the Produced YCE was applied on the hair loss area of 10 Androgenic alopecia patients, twice every day for 6 months, in order to test the effect of hair loss treatment and the role of stem cell activator. As a result, all of the patients showed a significant growth of hair after 3 months of test, and showed much more growing, thickening and strengthening of hair after 6 months. As a result of measuring the number of hair strings in the same scalp region of the patients after 6 months, it is found that the density of hair has increased, indicating that the hair loss treatment was effective. Also the hair follicle stem cell was isolated from the patients and the contents of growth factors (IGF, VEGF, FGF, HGF) derived from hair follicle stem cell were measured with ELISA. As result, the amount is found to be about 10 times greater than before the test. The hair follicle stem cell contains many growth factors that affect growth of hair, so it takes a highly important role in hair loss treatment. The YCE that the authors have produced was found to be effective in increasing the contents of growth factors that are derived from hair follicle stem cell. Thus it can be inferred that the YCE plays a role as a stem cell activator that activates the hair follicle stem cells. In conclusion, the YCE is considered to be highly effective for hair loss treatment and to have a role as a stem cell activator.

• 한국산림과학회지
• /
• 제109권4호
• /
• pp.390-399
• /
• 2020

본 연구는 조림목 묘령과 식재밀도가 느티나무 조림목의 초기 생육 특성에 미치는 영향을 알아보고자 수행되었다. 2017년 3월말에 온대 남부지역인 영덕지역 2 ha 면적에 묘령[용기묘(1-0), 용기묘(2-0)] × 식재밀도(3,000본 ha-1, 5,000본 ha-1) 4가지 조합으로 느티나무 묘목을 식재하였다. 각 처리별 3개의 조사구를 설치하였고, 조림목의 근원경과 수고 생장을 매년 9월마다 3년 동안(2017-2019년) 측정하여 수간 재적을 계산하였다. 느티나무의 초기생존율은 처리간에 차이를 나타내지 않았다. 수고는 묘령(1-0)과 묘령(2-0)에서 밀식처리의 효과가 나타나지 않았으나, 근원경과 H/D율은 묘령(2-0)에서 식재 후 3년차에 밀식처리 효과가 나타났다. 개체목당 수간재적은 묘령(2-0) 5,000본 ha-1 처리구에서 가장 높았으며, 묘령(1-0) 3,000본 ha-1 처리구에서 가장 낮았다. 수간재적은 묘령과 식재밀도 간에 상호작용 효과는 없었고, 묘령과 식재밀도가 높을수록 높은 수간재적을 보였다. 단위면적당 수간 재적은 용기묘(1-0) 3,000본 ha-1 대비 용기묘(1-0) 5,000본 ha-1는 85%, 용기묘(2-0) 3,000본 ha-1와 5,000본 ha-1는 각각 약 68%, 300% 향상되었다. 본 연구는 식재밀도가 묘령에 따라 생장에 다르게 영향을 미친다는 것을 보여주며, 용기묘(2-0)의 초기 생장을 향상시키는데 5,000본 ha-1 처리가 적합하다는 것을 제안한다.