• Journal of applied mathematics & informatics
• /
• 제7권3호
• /
• pp.773-785
• /
• 2000

In this paper an algorithm is presented based on the additive Schwarz method for steady groundwater flow in a porous medium. The subproblems in the algorithm correspond to the problem on a coarse grid and some overlapping subdomains. It will be shown that the rate of convergence is independent of the mesh parameters and discontinuities of the coefficients, and depends on the overlap ratio.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.55-60
• /
• 1997

An unstructured finite volume method is presented for seeking steady and unsteady flow solutions of the two-dimensional incompressible viscous flows. In the present method, SMAC-type algorithm is implemented on unstructured triangular meshes, using second order upwind scheme for the convective fluxes. Validation tests are made for various steady and unsteady incompressible flows. Convergence characteristics are examined and accuracy comparisons are made with some benchmark solutions.

• 대한전기학회논문지
• /
• 제37권4호
• /
• pp.197-204
• /
• 1988

A simple method that estimates the torque fluctuations in induction motor driven by CSI under steady state condition is presented and that uses the phasor diagram from the modified singlephase equivalent circuit. This method is also applied to evaluate the PWM and programmed do link modulation techniques for reducing the torque pulsations. The simplified calculations are compared with the exact digital solutions from machine D-Q equation. It is noted that the torque pulsations in induction motor driven by CSI are dependent upon the load condition unlike VSI.

• 수산해양기술연구
• /
• 제37권1호
• /
• pp.35-44
• /
• 2001

본 논문에서 취급한 계산모델 및 계산조건하에서 얻어진 주요한 결론은 다음과 같다. (1) 다방향 불규칙파중에서 TLP에 작용하는 파강제력 및 정상표류력의 유의치를 구할 수 있는 프로그램을 개발하였다. (2) 한방향파중에서 파강제력 및 정상표류력이 큰 모-드에 대해서는 다방향파의 영향으로 감소하는 경향을 보이고, 한방향파중에서 작은 모-드에 대해서는 다방향파의 영향이 무시할 수 없을 정도로 나타났다. (3) 다방향파의 상호작용에 의해 실해역을 재현할 수 있으며, 다방향파의 영향으로 최대 파강제력 및 정상표류력의 크기가 감소한다는 결과에 따라 다방향파의 영향을 고려하면 보다 현실적인 결과를 얻을 수 있을 것으로 사료된다.

• Journal of Pharmaceutical Investigation
• /
• 제23권3호spc1호
• /
• pp.1-8
• /
• 1993

A simple and quick method based on the transient diffusion theory for predicting the steady state rate of penetration of a drug after transdermal drug administration was proposed. The amount of drug entering the stratum corneum was determined by 20 strippings with an adhesive tape. From the profile of the amount of drug as a function of the number of strippings, the quantity of drug on the surface of stratum corneum was extrapolated. Based on the amounts of drug entering the stratum corneum during two time intervals $(t_1\;and\;t_2)$ within 1 hour after the application, the diffusion and partition coefficient were determined. Once the diffusion coefficient of the drug in the stratum corneum and the partition coefficient (stratum corneum/vehicle) were determined from the present approach, the steady-state flux of penetration across the stratum corneum was calculated. The steady-state rates of penetration of ascorbic acid and estradiol across hairless mouse skin were evaluated from this approach and compared with those obtained from ill vitro penetration experiment using excised hairless mouse skin. The data confirmed that the proposed method can predict the steady-state rate of penetration of these drugs across the stratum corneum.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.150-154
• /
• 2000

Mobilities of electrons ($\mu_p$) and holes ($\mu_p$) in 2, 5, and 10 mol% $TiO_2$-doped yttria stabilized zirconia (TD-YSZ) have been estimated by a non-steady state gas permeation method using models proposed by Weppner and Maruyama. Values of $\mu_n$ and $\mu_p$ were found to be closed to those in non-doped YSZ reported earlier. The concentration of electrons and holes were calculated from $\mu_n$ and $\mu_p$ values and the partial conductivities of electrons and holes measured by a dc-polarization method. The concentration of electrons at unit oxygen partial pressure increased with increasing $TiO_2$concentration, while the hole concentration was almost independent of $TiO_2$concentration.

• 한국정밀공학회지
• /
• 제24권12호
• /
• pp.57-64
• /
• 2007

There have been many researches for optimal controllers in multivariable systems, and they generally use accurate linear models of the plant dynamics. Real systems, however, contain nonlinearities and high-order dynamics that may be difficult to model using conventional techniques. Therefore, it is necessary a PID gain tuning method without explicit modeling for the multivariable plant dynamics. The PID tuning method utilizes the sign of Jacobian and gradient descent techniques to iteratively reduce the error-related objective function. This paper, especially, focuses on the role of I-controller when there is a steady state error. However, it is not easy to tune I-gain unlike P- and D-gain because I-controller is mainly operated in the steady state. Simulations for an overhead crane system with dynamic friction show that the proposed PID-LC algorithm improves controller performance, even in the steady state error.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.205-212
• /
• 2012

This paper proposes the fuzzy logic based variable step-size MPPT (Maximum Power Point Tracking) method for the stability at the steady state and the improvement of the transient response in the wind power system. If the change value of duty ratio is set on stability of the steady state, MPPT control traces to maximum power point slowly. And if the change value is set on improvement of the transient response, the system output oscillates at the maximum power point. By adjusting the step size with fuzzy logic, it can be improved the MPPT response speed and stability at steady state when MPPT control is performed to track the maximum power point. The effectiveness of the proposed method has been verified by simulations and experimental results.

• 대한전기학회논문지
• /
• 제36권3호
• /
• pp.188-196
• /
• 1987

This paper describes a design method for the buck type switching regulator to improve transient and steady state performances. Necessary design considerations on the power stage are given before designing the controller to obtain better trandient responses with less control effort and a feedforward compensation is also given to effectively improve the steady state performance. In the design of the controller, a PIM (proportional-integral-measurable) control method with optimized constant feedback gains is presented to get better tansient and steady state performances without complicating the implementation of controller. Computer simulations and experimental results are given to show the usefulness of the presented technique.

• Journal of Communications and Networks
• /
• 제12권6호
• /
• pp.600-604
• /
• 2010

A method of width adaptation in the radial basis function network (RBFN) using stochastic gradient (SG) algorithm is introduced. Using Taylor's expansion of error signal and differentiating the error with respect to the step-size, the optimal time-varying step-size of the width in RBFN is derived. The proposed approach to adjusting widths in RBFN achieves superior learning speed and the steady-state mean square error (MSE) performance in nonlinear channel environment. The proposed method has shown enhanced steady-state MSE performance by more than 3 dB in both nonlinear channel environments. The results confirm that controlling over step-size of the width in RBFN by the proposed algorithm can be an effective approach to enhancement of convergence speed and the steady-state value of MSE.