• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.41-48
• /
• 2012

A numerical analysis of thermal stratification in the upper plenum of the MONJU fast breeder reactor was performed. Calculations were performed for a 1/6 simplified model of the MONJU reactor using the commercial code, CFX-13. To better resolve the geometrically complex upper core structure of the MONJU reactor, the porous media approach was adopted for the simulation. First, a steady state solution was obtained and the transient solutions were then obtained for the turbine trip test conducted in December 1995. The time dependent inlet conditions for the mass flow rate and temperature were provided by JAEA. Good agreement with the experimental data was observed for steady state solution. The numerical solution of the transient analysis shows the formation of thermal stratification within the upper plenum of the reactor vessel during the turbine trip test. The temporal variations of temperature were predicted accurately by the present method in the initial rapid coastdown period (~300 seconds). However, transient numerical solutions show a faster thermal mixing than that observed in the experiment after the initial coastdown period. A nearly homogenization of the temperature field in the upper plenum is predicted after about 900 seconds, which is a much shorter-term thermal stratification than the experimental data indicates. This discrepancy is due to the shortcoming of the turbulence models available in the CFX-13 code for a natural convection flow with thermal stratification.

• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.221-237
• /
• 1997

This paper presents a new uniaxial material model for rate-sensitive analysis addressing both the transient and steady-state responses. The new model adopts visco-plastic theory for the rate-sensitive response, and employs a three-parameter representation of the overstress as a function of the strain-rate. The third parameter is introduced in the new model to control its transient response characteristics, and to provide flexibility in fitting test data on the variation of overstress with strain-rate. Since the governing visco-plastic differential equation cannot be integrated analytically due to its inherent nonlinearity, a new single-step numerical integration procedure is proposed, which leads to high levels of accuracy almost independent of the size of the integration time-step. The new model is implemented within the nonlinear analysis program ADAPTIC, which is used to provide several verification examples and comparison with other experimental and numerical results. The companion paper extends the three-parameter model to trilinear static stress-strain relationships for steel and concrete, and presents application examples of the proposed models.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.997-999
• /
• 1997

This Paper presents a relay modeling technique to deal with the relay transient characteristics. Existing relay models are based on steady-state concepts. The ninth-order state space mathematical model of the Mho distance relay has been constructed. Computer modeling of a typical distance relay is done within the Transient Analysis of Control System(TACS) subsection of the ElectroMagnetic Transient Program(EMTP).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.59-60
• /
• 2015

In this study, stress-strain, thermal expansion strain, total strain and high temperature creep strain of ultra-high-strength concrete with compressive strengths of 80, 130, and 180MPa were experimentally evaluated considering elevated temperature and loading condition. Also, transient creep strain has been calculated by using the results of experiment. Experimental coefficient K was proposed with application of non-steady state creep model. It is considered that the experimental results of this study could be baseline data for deformation behavior analysis of ultra-high-strength concrete.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1109-1118
• /
• 2021

The construction of STELLA-2 facility is on-going to demonstrate the safety system of PGSFR and to provide comprehensive understanding of transient behavior under DBEs. Considering that most events are single-phase natural circulation flow with slow transient, STELLA-2 was designed with reduced-height of 1/5 length scale. The ratio of volume to surface area in the vessel can relatively increase resulting in excessive heat transfer. Therefore, a steady-state thermal-hydraulic analysis was performed and the effect of design change to reduce the heat transfer through redan was investigated. The heat transfer through single wall redan in STELLA-2 was 3% of the core power, comparable to 1% of the core power in PGSFR. By applying the insulated redan, about 70% of decrease effect was observed. The effect on transient behavior was also evaluated. The conclusion of this study was directly applied to the STELLA-2 design and the modified version is under construction.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.31-37
• /
• 1994

BEASY is a soft-ware tool which may be used to solve problems in heat transfer(linear and non-linear, steady state and transient) and linear elastic stress analysis. It is based on the boundary element method. The central part is the analysis module, called BEASY. For pre- and post-processing the BEASY Interactive Modeling System BEASY-IMS can be used. Three examples are devoted to show the capability of BEASY.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.36-43
• /
• 2018

The availability of the weapon system can be analyzed through state modeling and simulation using the Markov process. In this paper, show how to analyze the availability of the weapon system and can use the Markov process to analyze the system's steady state as well as the RAM at a transient state in time. As a result of the availability analysis of tracked vehicles, the inherent availability was 2.6% and the operational availability was 1.2% The validity criterion was defined as the case where the difference was within 3%, and thus it was judged to be valid. We have identified the faulty items through graphs of the number of visits per state among the results obtained through the MPS and can use them to provide design alternatives.

• Journal of Aerospace System Engineering
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2010

As the rocket KSLV-1 called NARO was launched lately, development of domestic rocket technology has been accelerated elastically. Since the rocket technology needs a lot of empirical data, a variety of experiments should be done and lots of time have to be spent for accumulating the foundation of technology. However using a computer can be the solution to close a gap of technique because the simulation can be executed in short time against real experiments and calculate a multiplicity of cases easily. In this research, the transient analysis of turbopump-fed liquid rocket system was worked by the one dimensional modeling. The rocket system consists of the modulized components that are engine, turbopump and so on. For 70 ton class system, the rocket transient process of starting was studied and the performance analysis in steady condition was achieved. In addition, the estimation of nozzle internal flow was investigated by using a nozzle coefficient.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.245-249
• /
• 1989

From the careful analysis of the transformed dq system equations of a PWM Voltage Source Converter ( PWM - VSC ), a novel voltage control is proposed which is based on the derivative of in-phase current component of line currents and the relation between dc-link voltage and in-phase current component. A simple logical algorithm to implement the proposed scheme is also presented at transient state. The sinusoidal PWM is adopted at steady state. The simulation results show good transient characteristics.

• Tribology and Lubricants
• /
• v.19 no.2
• /
• pp.65-71
• /
• 2003

An elastohydrodynamic lubrication analysis was performed on the contacting teeth surfaces of involute spur gears. Kinematics of the gear and the pinion were taken into account to get accurate geometric clearances around the elastohydrodynamic lubrication region of the contacting teeth. Pressure and film thickness distribution for the whole contacting faces in lubricated condition at several time steps were obtained through the analysis. Besides the pressure spike at the outlet region, a representative phenomenon in elastohydrodynamic lubrication regime, the pressure at the inlet region was slightly higher than that of the center region. The film thickness of transient condition was thicker than that of steady condition.