• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1171-1176
• /
• 2005

The latest technical development of steel plate girder railway bridge are developing in ways to maximize its durability of materials in use of high strength steel and efficiency of maintenance and management by the introduction of simplified and standardization ideas. In addition to this, it is also expected to reduce the cost of bridge construction and to simplify the process of bridge manufacturing. Referring to this, composite few plate girder railway bridge is highly recommendable that is very economical with the fine exterior. In this paper, it will analyse the variation of dynamic behavior of existing composite few plate girder railway bridge with ballast caused by modified Slab Track through interpretation of limited enzyme in order to obtain the existing data for improvement of Slab Track system from Ballast Track system. Consequently, it can help maximize economic efficiency and structural capability. As a results, although the natural frequency by modified Slab Track are decreased, it is hardly influencing on the safety of railway bridges. It is also evident in the case of slab deck with a reduced scale in comparison with Ballast Track. Therefore, it is expected to reduce the cost of a railway bridge plan. And, it can expect the synergistic effect of the ensure long term durability of bridge caused by decreased stresses of bottom flange due to reduced dead load. As a result, the analytical study are carried out to investigate the composite few plate girder railway bridge could be the optimal design method for the dynamic safety of a girder section.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.15-25
• /
• 2017

The findings were summarized as follows. The safety check by manufacturer showed that 6 of 13 companies are over the average occurrence of defects. It was expected that there would be a difference between manufacturing technology capability and production system of each manufacturer. Consequently, manufacturers should institutionally improve and strengthen certification items for the upward standardization of safety certification before factory. Second, the safety check by year showed that the results of this study accord with those of previous studies on defect time. Consequently, manufacturers should classify the 3-year-old equipment for vehicle-mounted MEWP into a special check subject to do a nondestructive test according to proven results, and also reflect the test in a safety test system to do regular preventive activities of equipment defects. Third, the safety check by part showed that the boom and outrigger parts of vehicle-mounted MEWP have the most defects. Stress concentration resulted in defects as the boom part was most frequently operated in the structural parts for a real work. To prevent this, it is suitable to improve the hardness of boom materials. The outrigger part needs improvement in safety devices with materials. As an outrigger supports the overturning moment of equipment, it is most affected by its load based on the operating radius, resulting in fatigue crack.

• Journal of Digital Convergence
• /
• v.19 no.10
• /
• pp.75-86
• /
• 2021

Recently, the domestic BIPV market is expected to revitalize with the introduction of the "zero-energy building certification system(2020~)", but it is somewhat stagnant due to the rigidity of definitions in the current domestic BIPV construction standards. Also, since there is delaying revision on definition and standardization of BIPV, the system is so weak that there are cases where it has been approved as BIPV simply by installing a structure on the wall and fixing the module roughly. The damage caused by this can be passed on to consumers, and it can only create a negative perception of BIPV and jeopardize the entire market. The BIPV definition was prepared through a Delphi survey of related experts about market stagnant cause, unreasonable regulation, etc, and a revised plan was derived accordingly.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.61-75
• /
• 2011

A Geographic Information System(GIS) is a system that captures, stores, analyzes, manages and presents data with reference to geographic location data. In the later 1990s and earlier 2000s it was limitedly used in government sectors such as public utility management, urban planning, landscape architecture, and environmental contamination control. However, a growing number of open-source packages running on a range of operating systems enabled many private enterprises to explore the concept of viewing GIS-based sales and customer data over their own computer monitors. K telecommunication company has dominated the Korean telecommunication market by providing diverse services, such as high-speed internet, PSTN(Public Switched Telephone Network), VOLP (Voice Over Internet Protocol), and IPTV(Internet Protocol Television). Even though the telecommunication market in Korea is huge, the competition between major services providers is growing more fierce than ever before. Service providers struggled to acquire as many new customers as possible, attempted to cross sell more products to their regular customers, and made more efforts on retaining the best customers by offering unprecedented benefits. Most service providers including K telecommunication company tried to adopt the concept of customer relationship management(CRM), and analyze customer's demographic and transactional data statistically in order to understand their customer's behavior. However, managing customer information has still remained at the basic level, and the quality and the quantity of customer data were not enough not only to understand the customers but also to design a strategy for marketing and sales. For example, the currently used 3,074 legal regional divisions, which are originally defined by the government, were too broad to calculate sub-regional customer's service subscription and cancellation ratio. Additional external data such as house size, house price, and household demographics are also needed to measure sales potential. Furthermore, making tables and reports were time consuming and they were insufficient to make a clear judgment about the market situation. In 2009, this company needed a dramatic shift in the way marketing and sales activities, and finally developed a dedicated GIS_based market analysis and sales management system. This system made huge improvement in the efficiency with which the company was able to manage and organize all customer and sales related information, and access to those information easily and visually. After the GIS information system was developed, and applied to marketing and sales activities at the corporate level, the company was reported to increase sales and market share substantially. This was due to the fact that by analyzing past market and sales initiatives, creating sales potential, and targeting key markets, the system could make suggestions and enable the company to focus its resources on the demographics most likely to respond to the promotion. This paper reviews subjective and unclear marketing and sales activities that K telecommunication company operated, and introduces the whole process of developing the GIS information system. The process consists of the following 5 modules : (1) Customer profile cleansing and standardization, (2) Internal/External DB enrichment, (3) Segmentation of 3,074 legal regions into 46,590 sub_regions called blocks, (4) GIS data mart design, and (5) GIS system construction. The objective of this case study is to emphasize the need of GIS system and how it works in the private enterprises by reviewing the development process of the K company's market analysis and sales management system. We hope that this paper suggest valuable guideline to companies that consider introducing or constructing a GIS information system.

• Journal of KIBIM
• /
• v.10 no.1
• /
• pp.9-22
• /
• 2020

Recently, BIM has been extended to infrastructures such as roads and bridges, and the demand for BIM standard development for ports is increasing internationally. Due to the low level of utilization of classification system and drawing standards compared to other infrastructures, and the closed nature of national security facilities, ports have insufficient level of connection and sharing environment among external systems or users. In addition, since the standardization of data for port facilities is not made, it is still necessary to establish an independent DB for each system and to ensure interoperability of data between these systems since it does not have a shared environment among similar data. Therefore, the purpose of this study is to develop and verify IFC, the international standard for BIM, in order to cope with the BIM environment and to be commonly used in the design, construction, and maintenance of port facilities. To this end, we build a standard schema with port-specific Express Notation according to buildingSMART International's standard development methodology. First, domestic and international reference model standards were analyzed to derive components such as space and facilities of port facilities. Based on this, the components of the port facility were derived through the codification, categorization, and normalization process developed by the research team. This was extended based on the port BIM object classification system developed by the research team. Normalization results were verified by designers and associations. Then, IFC schema construction was based on Express-G data modeling based on IFC 4 * 2 Candidate, which is a bridge candidate standard based on IFC4 (ISO16739), and IFC 4 * 3 Draft, which is developed by buildingSMART International. The final schema was validated using the commercialized validation tool. In addition, in order to verify the structural verification of the port IFC schema, the transformation process was verified by converting the caisson model into a Part21 file. In the future, this result will not only be used as a delivery standard for port BIM products, but will also be applied as a linkage standard between systems and a common data format for port BIM platforms when BIM is used in the maintenance phase. In particular, it is expected to be used as a core standard for data exchange in the port maintenance stage.

• Spatial Information Research
• /
• v.5 no.2
• /
• pp.133-146
• /
• 1997

While occasional disasters have occurred recently in urban facilities such as bridges, buildings, subways, roads and others, the systematic safety management of urban facilities is greatly needed to prevent the disaster or to minimize the damages. This study proposes the way of setting-up and managing an building disaster information system so that this experience can be applied to other urban facilities to minimize trials and errors. With such a purpose, this study presents a building safety management information system and utilizes it for the building disasten information system. This study includes research agendas as follows : building maintenance and management infonnation system, setting-up and utilization the building safety management infonnation system, building disaster infonnation system using GIS. The results suggest that the building safety management infonnation system which can be related to the urban disaster infonnation system should be constructed in advance in order to utilize the building disaster infonnation system, and that, under this condition, it proved to be easily connected to the related database, especially GIS. And, to utilize such an infonnation system, the application programs such as safety evaluation program, cost estimation program and documents management program should be readily available. In addition, other functional programs related with maintenance and management should be designed and established. The schemes or devices for practical usage should be supplemented through a standardization and a pilot project in central government or Seoul Metropolitan Government level in order to set up and utilize the building safety management infonnation system, and the related laws or regulations should be prepared or amended to support the system.

• Journal of the Korean Society of Costume
• /
• v.55 no.4 s.94
• /
• pp.62-78
• /
• 2005

The modern period was the time that the most radical and extensive social and mental changes were occurring throughout the history, and modernism was prevailing as a general cognition system of people. Modernism, which carries principles of progress, belief in application of scientific technology, worship of reason, ideal of liberty as a col-e value of civilization, was plated as a leading ideology in the realm of society, culture and art In the early 20th century. In this study, the formative characteristics of modernism seen in architecture and fashion are analogized and analyzed in four ways ell the basis of the theory of p. Greenhalgh. First, 'Standardization for mass-production', which is analogized which P. Greenhalgh's 'Decompart-mentalisation', 'Social Morality', and' Technology'. Standardization for mass-production in architecture focuses on the development of a design prototype in order to mass produce; the development of ready-made clothes is actively done ill the fashion area for the same purpose as well. Second, 'Rational functionality' coming from P. Greenhalgh's 'The total work of art' and 'Function'. While rational functionality in architecture puts an emphasis on the rational operation of all the functions in regard to the relation between each part and the whole, rational functionality in fashion call be mainly seen in a dramatic increase in physical activity which could be hardly found before the modernism period. Namely, all the fashion design elements are developed for a certain rational and functional design on each part as well as on the whole in order to greatly increase physical activity. Third, 'the pursuit for genuineness of objects and universality of beauty' is on the analogy of P Greenhalgh's 'Truth', 'Anti-historicism', 'Abstraction', 'Internationalism/Universality'. This idea is adopted in architecture in the form of design of geometrical abstraction. In the same way, design using geometrical abstraction comes to have a significant meaning in fashion of the modernism period. So to speak, modernism architecture and fashion can be reborn to become an inter·national style by giving up the decorative and regional design prevailing before modernism and by expressing universal aesthetics in the form of simplicity and abstraction instead. Fourth, 'Expression of progress through a change in a viewpoint' stems from P. Greenhalgh's 'Progress', 'Transformation of Consciousness', 'Theology'. In architecture, this concept appears by using new construction materials and methods and by representing new aesthetical idea. As a result, it makes it possible for people to make progress for better lives. Like in architecture, new attempts for material application and processing are made in fashion. This gives rise to a general change in a viewpoint related to fashion, so that a flew fashion design which there has never been before can come out.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.770-777
• /
• 2017

Building information modeling (BIM) has been receiving attention as an integrated information model instead of CAD since the 2000s. BIM technology was first used in the architectural field and was later introduced to the civil engineering field. However, the government announced a plan for the application of BIM to 20% of all SOC projects from 2020, so the adoption of BIM technology is expected to accelerate. In order to successfully adopt BIM, a systematic structure should be supported for integrated design information and implementation technology. Also, it is important to establish the relationship between information systems because many complicated factors are intertwined in the construction industry. In this study, we propose a framework for constructing integrated information through identifying the information relations for introducing BIM in the civil engineering industry. We applied this framework to a bridge project to confirm its effectiveness. This study can be applied to the integrated management of the construction process and costs by introduction of a work breakdown structure (WBS) to BIM. In addition, this study is expected to contribute to the adoption of BIM in the civil engineering field through the proposal of information system standardization in this field.

• Korean Security Journal
• /
• no.23
• /
• pp.21-39
• /
• 2010

The dangerous impact on the traffic flows of cars is caused by no only the construction on the street but diverse construction sites. This in turn substantially influence on the citizens and pedestrians, thereby bring about the possibility of giant incidents. As the countermeasure for the problem in advanced countries, particularly in Japan "traffic inducement security system" has been implemented. It is analyzed that the death toll from traffic accidents has considerably declined. In the case of South Korea the system has not been administered but restrictively executed at some construction sites; however proceeding it with the lack of professionalism. The introduction of traffic inducement security system would be the opportunity for South Korea to make a progress in the safety culture such as traffic security and traffic jam. This study thus aims at analyzing the advanced countries' cases, conducting comparative analysis with Korea's scheme, and establishing the plan to adopt the traffic inducement security system. Through the output of this study followings were proposed as plans of introducing the traffic inducement security system. First of all, legal assessments regarding traffic inducement operation, for example adding the operation of the system into the category of security service, need to be preceded prior to its introduction secondly, the traffic inducement security is the institution which can contribute to the improvement of traffic safety, and also internalizing social cost. therefore, it needs to be equipped with the new qualification such as the instruction with the standardized traffic safety map, instruction system, curriculum and the publication of teaching materials. thirdly, the education for the guard should be proceeded with dividing academic and technical ones with specific curriculum. At the fourth, the securement of the venue for the driving training, the determination on technical instruction contents and the training professional instructor needs for the method of administration. In addition, the efforts on the overal standardization of traffic inducement security is necessary, and it also requires constant collaboration among private security industry, academia, professionals, relavant research institutes, etc. At the last but the least, henceforth it is prerequisite that the networking system with a diverse array of associated entities due to its social ripple effect and job creation effect.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.23-32
• /
• 2010

Water mains underground facilities are essential components to make up urban infrastructure. In order to manage these water mains underground facilities systematically and scientifically, GIS (Geographic Information System) had been constructed. For the sake of construction of GIS for water mains underground facilities, an exact underground detection and the construction of DB (Data Base) for buried water mains underground facilities should be preceded. In this study, in order to find out the ways to improve exact detection rate of data, the statistical analysis for the causes of detection raw degradation was done, and standardization methods of detection through a case study were suggested, When water mains underground facilities were measured, the detection of non-metallic water pipes was not carried out. The reason was that the results of detection was uncertain and detection was difficult because the assessment of public measurements was vulnerable. Moreover, due to the absence of standardized operating regulations for detection, systematic surveys weren't conducted. In this study, methods to standardize works over the detection of water mains underground facilities were presented so that we can improve the detection rate when we are doing that. As the proposals to improve detection rate, effective performance assessment over non-metallic pipes were presented, and related issues to supplement work regulations of public survey were described systematically.