• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.547-557
• /
• 2020

In this study, damping control devices were applied to the suspension system of a capsule train, and the effects were investigated to improve the ride comfort. The superconductor electrodynamic suspension (SC-EDS) method is used for the capsule train levitation. This method has advantages such as no gap control and a large gap. However, the SC-EDS method has disadvantages such as large gap variation and small damping characteristics against outer vibration, which causes degradation of the ride comfort. In this study, the damping control devices in the primary and secondary suspension were considered to improve the ride comfort in the capsule train. Damping control devices in the primary and secondary suspension can reduce the vibration transmission from outer disturbances to the bogie and from the bogie to the car body, respectively. Simulations for dynamic characteristics analyses were conducted based on the capsule train dynamic model to investigate the effects of the damping control devices on the ride comfort. As a result, it was confirmed that the ride comfort requirements according to the ISO standard can be satisfied by applying the damping control in the capsule train suspension.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.896-904
• /
• 2004

In this paper, We present an efficient variable rate speech coder for spectral efficiency and packet processing technique for packet loss compensation of a voice codec with 10msec frame in VoIP service. Through disconnecting the users from the spectral resource during silence interval of about 60% period, a variable rate voice coder based on a voice activity detection(VAD) can increase spectral gain by two times. The performance of the method was analyzed by variation of detected voice activity factor and degraded speech frame ratio under various background noise level, and compared those of G.729B of ITU-T 8kbps standard speech codec. A method to compensate lost packets utilized addition of recovery data to a main stream and error concealment scheme for speech quality enhancement, the performance is verified by reconstructed speech quality. The proposed scheme can achieve spectral gain by two times or enhance speech quality by 3dB through reserved bandwidth of VAD. Therefore, the proposed method can enhance a spectral efficiency or speech quality of VoIP.

• Journal of Nutrition and Health
• /
• v.13 no.2
• /
• pp.82-91
• /
• 1980

The aim of this study was to define the range of the menstrual blood loss(MBL), and the upper limit of the MBL associated with iron deficiency anemia in Korean women, For this purpose, healthy unmarried women between the age of 15 to 26 years were selected from July to September, 1979 and results obtained were used for determining baseline MBL and its relationship to iron nutriture. One houndred forteen women were tested for their MBL and hematological and biochemical data such as hemoglobin(Hb) concentration, hematocrit, mean corpuscular hemoglobin concentration(MCHC), and serum iron and ferritin concentration. This study was partly supported by World Health Organization. The results of this study are summarized as follows: 1) The mean values and standard error of mean of MBL were $30.7{\pm}2.19ml$ for total subjects, $30.4{\pm}3.14ml$ for sutjects below 20 years of age and $30.3{\pm}2.49ml$ for subjects aged more than 20 years. No significant variation was noted for amount of MBL between two age groups. 2) The median value and 95th percentile value of MBL were 26.5ml and 69.0ml respectively for total subjects. Maximum number (24.6%) of the subjects fell in group with 10-20ml of MBL while 10.5% showed MBL above 50m1. 3) Mean value of the duration of menstruation for total subjects was 4.34 days. 4) It was observed that mean values of Hb concentration, hematocrit and MCHC were decreased slightly in subjects showing MBL more than 40m1. Serum iron and ferritin levels were markedly decreased in women with MBL above 40m1 and 20-30ml, respectively. 5) In subject population showing MBL above 50ml, the frequency of subjects with hematological and biochemical data below anemia criteria were remarkably increased. 6) Although the number of subjects tested was small and the subject selection was not done by random stratified sampling from a population group, this study suggested that the upper normal limit of MBL of Korean women seems to be in the range of 40-50ml.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.617-626
• /
• 2008

Recently, it has been issued whether the current permission standards for forest land-use conversion is adequate or not. This study was aimed at evaluating the propriety of the current permission standards using the Delphi technique, which is one of survey techniques regarding experts's opinions. The results of the survey indicated that the standards related to the connection development restriction and the height of the first berm were underrated in most of the evaluation factors. The size limit and the altitude restriction of the land-use conversion also have a low propriety or applicability due to their vagueness. In case of average slope, its applicability was rated as significantly low because there is no standardized method for estimating or verifying the average slope. A statistical analysis based on coefficient of variation and one-way ANOVA were conducted to examine whether each group of experts agree with these survey results. It is appeared that the survey using Delphi technique could successfully achieved an agreement from each group of experts. Overall, evaluation factors considered in this study seems to be effective to verify the problems of each standards and to guide to improvement of the standards.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.11
• /
• pp.1598-1604
• /
• 2017

Objective: The present study investigated the litter performance of multiparous sows fed 3% and 6% densified diets at farrowing to weaning during summer with mean maximum room temperature of $30.5^{\circ}C$. Methods: A total of 60 crossbred multiparous sows were allotted to one of three treatments based on body weight according to a completely randomized design. Three different nutrient levels based on NRC were applied as standard diet (ST; metabolizable energy, 3,300 kcal/kg), high nutrient level 1 (HE1; ST+3% higher energy and 16.59% protein) and high nutrient level 2 (HE2; ST+6% higher energy and 17.04% protein). Results: There was no variation in the body weight change. However, backfat thickness change tended to reduce in HE1 in comparison to ST treatment. Dietary treatments had no effects on feed intake, daily energy intake and weaning-to-estrus interval in lactating sows. Litter size, litter weight at weaning and average daily gain of piglets were significantly greater in sows in HE1 compared with ST, however, no difference was observed between HE2 and ST. Increasing the nutrient levels had no effects on the blood urea nitrogen, glucose, triglyceride, and creatinine at post-farrowing and weaning time. The concentration of follicle stimulating hormone, cortisol and insulin were not affected by dietary treatments either in post-farrowing or weaning time. The concentration of blood luteinizing hormone of sows in ST treatment was numerically less than sows in HE2 treatment at weaning. Milk and colostrum compositions such as protein, fat and lactose were not affected by the treatments. Conclusion: An energy level of 3,400 kcal/kg (14.23 MJ/kg) with 166 g/kg crude protein is suggested as the optimal level of dietary nutrients for heat stressed lactating sows with significant beneficial effects on litter size.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.519-535
• /
• 2012

In order to establish a rainfall-runoff model, calibration of hydrological parameters for the model is very important. Especially, Curve Number(CN), estimated by NRCS method, is a main factor to apply unit hydrograph theory to calculation of peak discharge. For using NRCS method, it is needed selecting AMC because CN is strongly connected with that. In this study, we focus our concern on finding a applicable standard for selecting AMC for CN. For this, three dams which are Boryeong, Habchon, Namgang are selected as target basins to use observed data including rainfall and dam inflow. As a result of this research, it is found that CN must be included as a calibrated parameter to calculate effective rainfall for the rainfall-runoff model. Also, it is preferred to use PWRMSE of HEC-HMS program as a objective function for optimizing hydrological parameters. From the analyzing result of variation of AMC for peak discharge, it is recommended to apply AMC-III to estimation of CN for calculating effective rainfall of design hydrograph.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.156-165
• /
• 2006

In this paper, a new intelligent moving target tracking and surveillance system basing on the pan/tilt-embedded stereo camera system is suggested and implemented. In the proposed system, once the face area of a target is detected from the input stereo image by using a YCbCr color model and phase-type correlation scheme and then, using this data as well as the geometric information of the tracking system, the distance and 3D information of the target are effectively extracted in real-time. Basing on these extracted data the pan/tilted-imbedded stereo camera system is adaptively controlled and as a result, the proposed system can track the target adaptively under the various circumstance of the target. From some experiments using 480 frames of the test input stereo image, it is analyzed that a standard variation between the measured and computed the estimated target's height and an error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 1.03 and 1.18$\%$ on average, respectively. From these good experimental results a possibility of implementing a new real-time intelligent stereo target tracking and surveillance system using the proposed scheme is finally suggested.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• Journal of Korean Society of Forest Science
• /
• v.62 no.1
• /
• pp.1-18
• /
• 1983

Sum of daily mean temperature, sum of daily mean relative humidity and sum of daily mean duration of sunshine during the growing season (March-October), and daily mean temperature, daily mean relative humidity and daily mean minimum temperature during the dormant season (November-February) were obtained respectively from the climactic data recorded at 26 different standard stations for 30 years from 1951 to 1980, to provide a method for proper selection of tree species suitable to a certain site. They were also marked on the map of Korea. The whole country was divided into 6 regions by trend of temperature variation and the regression equations for each region were produced to estimate the sum of daily mean temperature of the growing season and the sum of daily mean minimum temperature of the dormant season in a certain site where tree plantings are planned. The natural range of distribution of each species was expressed by the sum of daily mean temperature and daily mean minimum temperature on the basis of "Horizontal and vertical distribution of the Korean woody plants" reported by Chung and Lee (1965).

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.284-294
• /
• 2010

In this study, river water-based reference materials (RMs), NIER-I08RW and NIER-I09, for trace metal analysis were prepared and certified for Pb, Cd, Cr and Cu with evaluation of uncertainties. The RMs were confirmed to be homogeneous enough to be used as proficiency testing materials since within-bottle homogenieties of the RMs were lower than 0.3 times of targeted standard deviation of proficiency testing. The RMs were distributed to environmental testing laboratories for the proficiency testing and the variation of Z scores of the proficiency testing results were compared for different assigned values. The relative bias, $B_{relative}$, deviations between reference values and consensus values, were lower than ${\pm}$1 except for cadmium of NIERI08RW. The results showed both values were in a good agreement and only 2.9% of Z scores changed by using a different assigned values such as consensus and reference values.