• 한국가스학회지
• /
• 제3권2호
• /
• pp.43-52
• /
• 1999

지하에 매설된 도시가스 배관에서의 누출 가스에 대한 확산 거동을 관찰하기 위하여 지중 확산실험조를 제작하여 실험하였다. 실험조는 도시가스 공급위치와 농도의 측정위치를 변화시킬 수 있도록 acryl로 제작하였으며, MOS 센서를 이용하여 도시가스 농도를 측정하였다. 가스의 지하 확산을 측정하기 위한 토질로서 주문진 표준사와 화강풍화토를 이용하였으며, 가스누출 속도 변화에 따른 도시가스 농도 변화를 시간에 따라 측정하였다. 누출점으로부터 센서의 측정위치가 가까울수록 또는 누출 속도가 증가할수록 가스의 감지시간이 감소하였으며, 누출가스 농도의 빠른 증가로 인하여 정상상태시 높은 농도를 나타내었다. 또한, 주문진 표준사보다 다짐에 의해 밀도가 증가한 화강풍화토에서 초기에 농도가 낮게 측정되었으나, 시간이 지남에 따라 농도가 높게 나타났다.

• 한국BIM학회 논문집
• /
• 제10권4호
• /
• pp.50-59
• /
• 2020

Recently, the government has actively promoted the introduction of BIM at the national level to improve the efficiency and productivity of the construction industry, and private interest in the application of BIM has also increased. However, despite the large amount of references and information, not much research has been done in quantitative ways to accurately measure the performance of BIM projects. The purpose of this study is to review performance measurement cases using ROI, investment effect analysis, and queue model analysis using domestic and overseas BIM guideline research and to present standard templates that can quantitatively measure BIM performance records according to domestic conditions based on this. Performance measurement trends and cases according to the application of BIM were analyzed, and nine quantification elements were derived from this, and based on this, a performance measurement data collection template at the BIM life cycle stage was prepared. Detailed items and contents were prepared for the nine quantification elements, and the final template consisted of a total of 43 questions, divided into the entire stage (15), the beginning (8), the middle (8), and the latter (12) areas. It is expected that by using the standard template of railway BIM performance records developed in this study, the BIM design stage will be diagnosed and the deficiencies will be supplemented, which will be the basic data for measuring actual quantitative performance in all life cycle performance of future BIM projects.

• 대한임상전기생리학회지
• /
• 제6권1호
• /
• pp.103-114
• /
• 2008

The purpose of this study is to use standard and downward slope of the keyboards with taping to influence electromyography of upper trapezius. The effect of taping raise a medical criticism, but we do an experiment on two kind of keyboards with taping in order to decrease stress of shoulder. Subjects are in Seonam university whose are twelve healthy adults in their twenties. This experiment used two kind of keyboards. Standard keyboard's degree is $0^{\circ}$ and another keyboard's degree is $-7.5^{\circ}$. Application of Kinesio taping attached belly of upper trapezius tightly. Measurement of electromyography attached posterior of acromion process go by spinous process of 7th cervical vertebra and upper trapezius. Method of analysis used Repeated measure two-way ANOVA. Result of this experiment, both shoulder's muscle activity increased(p<.05) when used standard keyboard and downward keyboard with taping used. We compared muscle activity that used downward keyboard than standard keyboard. Statistically, it dosen't increase in neck and shoulder(p>.05). Therefore, using a keyboard with upper trapezius's taping in order to decrease muscle activity isn't influenced.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.107-114
• /
• 2005

In order to analyze the elastic-plastic fracture behavior of a structure, the fracture resistance curve of the material should be known first. The standard CT specimen was used to obtain the fracture resistance curves of a piping system. However, it is known that the fracture resistance curve by the standard CT specimen is very conservative to evaluate the integrity of a structure. Also the fracture resistance curve is effected by the specimen geometry and the dimensions because of the constraint effect. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the standard CT specimen and to provide an additional safety margin. For these, the fracture tests using a real pipe specimen and the standard CT specimen test were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method was used to measure the crack extension and the length for the pipe test. Also finite element analyses were performed with a CT specimen and a pipe in order to prove the additional safety margin. From the result of tests and analyses of the pipe and the standard CT specimen, it was observed that the fracture analysis with the standard CT specimen is conservative and the additional safety margin was proved.

• 산업경영시스템학회지
• /
• 제29권4호
• /
• pp.83-90
• /
• 2006

It has lately been difficult to share the research outcomes information due to the information system not being compatible with one another. To solve this problem, it is believed that a meta data standard needs to be developed for all the institutions to follow. This paper shows how to make the research outcome of Science and Technology R&D project a standard metadata. We first classified all the research outcome into the following seven groups: Report, Journal article, Presentation material, Book, Dissertation, Industrial rights, and Technology development. We then identified three components that constitute a standard metadata. We employed the Dublin Core Metadata Set and CERIF(Common European Research Information Format) for worldwide interoperability. This Standard can be applied in the following areas: 1) Developing a standard architecture to manage research result within the organization. 2) Designing a conceptual/logical database to measure and evaluate the research outcome. 3) Developing a metadata system for research outcome as a subsystem of an Industrial Technology MDR (Metadata Registry) System.

• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.72-80
• /
• 1996

In this paper, variable windowing mean filter to remove speckle noise and a measure to detect thin edge in ultrasonic images are proposed. Because ultrasonic images are corrupted by speckle noise showing a granular appearance, good edge detection is difficult. As a result, noise removing filter is needed in preprocessing stage. The speckle noise removing filter is based on mean filter whose window size is changed by the ratio of standard deviation to mean for image signal and noise signal in local area. And the measure expressed the difference of means between tow windows is used for detecting thin edge in filtered image. Results show that variable windowing mean filter removes speckle noise effectively, and proposed measure is useful in detecting thin edge.

• 한국수학사학회지
• /
• 제17권2호
• /
• pp.85-96
• /
• 2004

본 연구에서 카오스 모형을 직접적으로 검정하기 위한 표준적인 기법 중의 하나인 R/S 분석(resealed range statistical analysis)과 허스트 지수를 'sinusoid' 패턴 평가하는 데 적용하였다. 이는 다소 잡음이 섞여 있으면서 동시에 준주기 성향을 갖는 시계열자료에 대해서 허스트 지수가 이를 간접적으로 평가 할 수 있는 측도(measure)로 활용될 수 있음을 논하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.284-287
• /
• 2009

In order to plan and manage public facilities effectively and efficiently, it is necessary to diagnose the current status of facilities and decide the objective features. Performance measurement is to provide managers with the information they need to measure competitive advantages. This paper discusses public facility performance in order to establish the conceptual framework for performance measurement for public facilities. In order to develop the measurement of public facility performance, a pilot study was conducted with facilities managers of facilities management corporation of public districts in Seoul. We investigated how public facilities management teams have assessed their performance and collected data regarding financial aspects, service aspects, community aspects, and building aspects. There is no standard format to measure facility performance since building sizes, programs, community needs widely differ. However, it is necessary to have a more consistent system to measure facility performance. In addition, each public municipal district needs to empower each district facilities management corporation to participate in managerial decisions and budget control.

• 한국전자거래학회지
• /
• 제8권4호
• /
• pp.1-16
• /
• 2003

ERP implementations are known to be unusually difficult, even when compared to other large-scale systems developing in a firm level, because it requires a substantial investment of time, money, and internal resources. Moreover, medium and small-sized enterprises that are increasingly adopting ERP feel much difficult due to the lack of resources. To promote the spread of ERP in medium and small-sized enterprises, "ERP template standardization methodology" led by government has been used for constructing ERP system in Korea. In this study, we present a study to measure fitness between ERP standard templates and business processes of 10 small enterprises in 5 industries. Also, we define a fitness measure suitable for this purpose. We car find that ERP template standardization methodology is partly adequate to establish ERP systems and it is required to add to templates which support the differences of business process.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제20권4호
• /
• pp.287-298
• /
• 2013

A standard deviation has been a starting point for a mathematical definition of risk. As a remedy for drawbacks such as subadditivity property discouraging the diversification, coherent and convex risk measures are introduced in an axiomatic approach. Choquet expectation and g-expectations, which generalize mathematical expectations, are widely used in hedging and pricing contingent claims in incomplete markets. The each risk measure or expectation give rise to its own pricing rules. In this paper we investigate relationships among dynamic risk measures, Choquet expectation and dynamic g-expectations in the framework of the continuous-time asset pricing.