• Spatial Information Research
• /
• 제22권3호
• /
• pp.47-58
• /
• 2014

삼림전용 축소를 통한 온실가스 흡수량의 검증 및 인증(MRV: Measurement, Reporting, Verification)이 REDD의 기회비용 산정과정에서 핵심요건으로 부각되고 있다. 본 연구의 목적은 북한 금강산을 사례지역으로 UN-REDD 기회비용 산정과정에서 위성영상을 활용한 MRV의 잠재력을 파악하고, MRV과정에서 발생할 수 있는 입증책임에 관련된 쟁점들을 사전에 점검하는 데 있다. UN-REDD 기회비용을 산정하는 과정에서, MRV에 필요한 지표를 도출하고 위성영상을 활용하여 역사적 벌채율, 토지이용, 토지피복, 탄소저장량 등에 대한 정보의 수집여부를 평가하였다. 위성영상의 육안판독은 금강산의 MRV 여건(산림면적, 산림의 황폐화 추세 등)을 대, 중, 소 3단계의 분류체계에 의거하여 가시적인 기록으로 제시하였다. 위성영상이 국제사법재판소, UN, UN-REDD 등에서 증거자료로 인정되기 때문에 기회비용 산정과정에서 법적으로 구속력을 가진 증빙자료로 활용될 수 있을 것으로 판단된다. 현지조사와 문헌조사를 활용한 MRV에 대해서도 측정자료 확보에 대한 불확실성과 불안으로 인하여 북한의 REDD에 대한 활발한 투자가 어렵게 되고, 북한의 산림보전에 관련된 정부 기업 개인들과 거래하는 것을 꺼려할 정도로 대안이 없는 것이 아니라는 것이 확인되었다. 본 연구를 통해 도출된 결과는 북한에서 REDD사업을 하려는 남측 기업과 GCF(녹색기후기금, Green Climate Fund)를 비롯한 탄소무역 분야에서 실무를 수행하는 관계자들에게 구체적인 참고자료로 활용될 수 있을 것으로 판단된다.

• 농업과학연구
• /
• 제32권2호
• /
• pp.151-167
• /
• 2005

In this study, certain factors influencing cherry tomato were estimated using system equations. In addition, the amount of influence to income from each factor was estimated from both direct and indirect effects. Based on OLS(Ordinary Least Squares) estimation, path analysis and factor analysis were employed to overcome multicollinearity problems. Data used in this study is interviewed cross sectional data of 65 cherry tomato producing farm in Chungnam-do area. Average age of the producers is 46.5. Average year of the production is 8 years. Average farm size, productivity, and income are 1,123 pyong, 7,439kg/10a, 8,112,000won/10a, respectively. The business performance of the sample farms were above average, in terms of the diagnosis by "Standard Business Diagnosis for Cherry tomato". To identify the factors influencing productivity, 15, 19, and 25 independent variables were selected for the dependent variables of yield, price(quality), and business cost, respectively. Finally, yield, quality, and business cost variables were set as independent variables to explain income as dependent variable. As a result of main factor analysis, 10, 12, 15, and 16 factors were identified as main factors for yield, quality, business cost, and income, respectively.

• 한국건축시공학회지
• /
• 제16권2호
• /
• pp.133-140
• /
• 2016

건설공사에 있어 노무량은 건설공사비 산정을 위한 기준으로 사용되고 있고, 건설산업의 생산성을 파악하는 근거자료로도 활용되고 있다. 하지만 노무량의 기준이라고 하는 표준품셈과 실제투입 노무량과 큰 차이를 보이고 있어 이를 해결할 수 있는 방안이 필요하다. 따라서 본 연구에서는 실제투입 노무량을 좀 더 정확하고 간편하게 입력할 수 있는 시스템을 구축하기 위하여 전통적인 종이와 펜을 이용한 수기방식을 그대로 따르면서 전자문서화에 대한 이중부담이 없는 디지털펜을 이용하는 방안을 제시하고자 한다. 본 연구를 통해 실투입 작업정보를 단순히 저장하는 것뿐만 아니라 웹을 통한 공유 및 활용을 통해서 공사비 산정업무의 생산성 측면에서도 기여할 것으로 사료된다.

• 한국측량학회지
• /
• 제31권1호
• /
• pp.79-87
• /
• 2013

본 연구는 대체비용법을 이용하여 수치지형도 갱신사업의 편익을 분석하는 방법을 제안하였다. 대체비용법은 분석하고자 하는 사업의 기능을 기존 시장의 재화 또는 서비스의 기능으로 대체하는데 필요한 최소 비용으로 해당 사업의 편익을 측정하는 방법이다. 따라서 도시군관리계획수립과 같은 지방자치단체의 18개 행정 업무에서 1/5,000 수치지형도의 갱신에 관한 요구를 조사한 후 이들 요구를 현황측량 및 현장조사 용역으로 대체하기 위한 비용 모형을 건설분야 표준품셈과 GIS 기업을 대상으로 수행된 설문 결과를 이용하여 수립하였다. 그 결과 조사대상 지방차지단체에서 갱신사업의 연간 편익은 265,960,999원으로 측정되었다. 또한 0.5년에서 4년까지 갱신주기를 변화하면서 비용편익비를 분석하여 최적 갱신주기를 탐색하였다.

• Journal of Information Processing Systems
• /
• 제17권3호
• /
• pp.473-488
• /
• 2021

The enterprise resource planning (ERP) system is a standardized and advanced business process that many companies are implementing now-a-days through customization. However, it affects the efficiency of operations as these customizations are based on uniqueness. In this study, we analyzed the impact of customized modules and processing time on customer service request (CSR), by utilizing the stacked CSR data during the construction and operation of ERP, focusing on small and medium-sized enterprises (SMEs). As a result, a positive correlation was found between unit companies and the length of ERP implementation; ERP modules and the length of ERP implementation; ERP modules and unit companies; and the type of ERP implementation and ERP module. In terms of CSR, a comparison of CSR processing time of CBO (customized business object) module and STD (standard) module revealed that while the five modules did not display statistically significant differences, one module demonstrated a statistically very significant difference. In sum, the analysis indicates that the CBO-type CSR and its processing cost are higher than those of STD-type CSR. These results indicate that companies planning to implement an ERP system should consider the ERP module and their customization ratio and level. It not only gives the theoretical validity that should be considered as an indicator for decision making when ERP is constructed, but also its implications on the impact of processing time suggesting that the maintenance costs and project scheduling of ERP software must also be considered. This study is the first to present the degree of impact on the operation and maintenance of customized modules based on actual data and can provide a theoretical basis for applying SW change ratio in the cost estimation of ERP system maintenance.

• Journal of Power Electronics
• /
• 제3권3호
• /
• pp.145-150
• /
• 2003

Reliability, availability, and cost have been the major concerns for photovoltaic hybrid systems since their beginning as primary sources for much critical applications like communication units and repeaters. This paper descnbes the performance of two hybrid systems, photovoltaic-battery, wind-turbine coupled with the public-grid (PVBWG) hybrid system and photovoltaic-battery, wind-turbine coupled With the diesel generator (PVBWD) hybrid system The systems are sized to power a typical 300W/48V de telecommunication load continuously throughout the year Such hybrid systems consist of subsystems, which in turn consist of components Failure of anyone of these components may cause failure of the entire system. The reliability and availability basics, and estimation procedure for the two proposals are introduced also in this paper. The PVBWG and PVBWD system configurations are shown with the relevant mean-time-between-faIlure (MTBF) and failure rate (${\lambda}$) of each component. The characteristics equations of the two systems are deduced as a function of operating hours and the percentage of sun and wind availabilities per day. The system probability failure as well as the reliability is estimated based on the fault tree analysis technique. The results show that, by using standard or normal components MTBF, the PVBWG is more reliable and the time of periodic maintenance period is more than one year especially in the rich sites of both sun and wind, but PVBWD competes else Also, in the first five years from the system installation, the system is quit reliable and may not require any maintenance. The results show also, as the sun and wind are available, as the system reliable and available.

• 대한토목학회논문집
• /
• 제43권2호
• /
• pp.267-275
• /
• 2023

최근 30년 이상 노후화된 국내 인프라의 증가로 한정된 예산 내에서 인프라 유지관리를 위한 정확한 유지관리 비용산출과 그에 따른 적절한 예산분배의 중요성이 증대되고 있다. 이에 본 연구에서는 콘크리트 교량의 대표적인 결함과 이에 대한 보수보강 공법들을 매칭하고 유지보수에 필요한 비용을 산정하였다. 표준품셈과 BMS (Bridge Management System) 데이터 분석을 통해 교량의 보수보강 공법을 분류하였으며, 결함의 위치와 종류, 크기에 따라 결함-공법을 매칭하였다. 그리고 표준품셈을 기준으로 단위당 작업량과 물량을 계산하여 노무비, 경비, 재료비를 구분하여 산출하였다. 서울시 교량 유지보수 내역서와 비교를 통해 평균 예측 정확도가 85.1 %가 나왔으며, 결함의 간단한 조건을 통해 유지보수 비용을 파악할 수 있다. 향후 현장 조건을 고려한 장비 및 야간작업 여부를 추가하여 더 높은 유지보수 비용을 파악할 수 있을 것으로 기대된다.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.485-490
• /
• 2010

Sensorless control methods are generally used in motor control for home-appliances because of the material cost and manufactureing standard restrictions. The current model-based control algorithm is mainly used for PMSM sensorless control in the home-appliance industry. In this control method, the rotor position is estimated by using the d-axis and q-axis current errors between the real system and a motor model of the position estimator. As a result, the accuracy of the motor model parameters are critical in this control method. A mismatch of the PMSM parameters affects the speed and torque in low speed, steadystate responses. Rotor position errors are mainly caused by a mismatch of the stator resistance. In this paper, a stator resistance compensation algorithm is proposed to improve sensorless control performance. This algorithm is easy to implement and does not require a modification of the motor model or any special interruptions of the controller. The effectiveness of the proposed algorithm is verified through experimental results.

• 대한설비공학회지:설비저널
• /
• 제10권4호
• /
• pp.297-303
• /
• 1981

Optimal design of shell and tube heat exchanger system with the working fluids which may condense outside the tubes has been carried out under specified inlet and outlet conditions. Independent variables such as number of parallel series, tube diameter, distribution pitch, tube side pressure loss, baffle cut and shell side pressure loss as well as dependent variables such as shell diameter, number of tubes, number of serial series and number of baffles were all characterized according to the standard. Exhaustive search method was used to construct a computer program together with the calculation of heat transfer rate by LMTD method. stress analysis of maj or parts was made to examine their dimensions satisfying heat transfer and pressure loss requirements. Cost estimation based on the installation, operation and maintenance was also made, A few representative variables, heat transfer area, shell diameter and pressure loss, were used to express cost function, finally giving the optimal selection of all tentative solutions.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.130-142
• /
• 2016

BIM library, as a systematic collection of BIM objects where the building information is stored, is a vital factor to construct the BIM based work environment. However, construction business is faced the problems relating BIM library such as the absence of the standard for establishing BIM library, the discontinuity of BIM library's compatibility and the lack of practice applicable BIM library. These problems cause the decreasing work efficiency and the recreating BIM model, by delivering inefficient information required in each stage and application field. The purpose of this study is to suggest the integrated management system for property information of BIM library in order to minimize the reworking and to manage information of each stage and application field when exchanging and sharing information. To achieve this, the BIM information classification, the criteria of property requirements for information exchange in BIM application field and the BIM library management system are developed. This study could contributes to ensuring the reliability and accuracy of results of BIM based analysis and to enhancing the speed of business process with sharing and exchanging building information utilizing a single BIM model.