• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.196-204
• /
• 2022

Electrostatic discharge (ESD) protection devices of P-type embedded silicon-controlled rectifier (PESCR) structure were analyzed for high-voltage operating input/output (I/O) applications. Conventional PESCR standard device exhibits typical SCR characteristics with very low-snapback holding voltages, resulting in latch-up problems during normal operation. However, the modified device with the counter pocket source (CPS) surrounding N⁺ source region and partially formed P-well (PPW) structures proposed in this study could improve latch-up immunity by indicating high on-resistance and snapback holding voltage.

• Journal of ILASS-Korea
• /
• v.23 no.4
• /
• pp.212-220
• /
• 2018

As increase the number of vehicles, the issue of greenhouse gas that was emitted by them became important. As a result, greenhouse gas (GHG) regulations are being strengthened and efforts are being actively made to reduce greenhouse gas emissions in the automotive industry. In the other hand, regulations for harmful emission of vehicles have been reinforced by step. Especially, the lastly applied step, so called Euro 6, not only decreased NOx limit down to half of Euro 5 but also introduced real driving emission limit for NOx and PN. It is a challenge for manufacturers to meet the recent GHG regulation as well as the latest emission regulation. To overcome these regulations a De-NOx after-treatment system is being applied to diesel vehicles that are known emitting the lowest GHG among conventional internal combustion engines. At the time of the introduction of Euro 6 emission standard in Korea, in the domestic fuel economy certification test, some diesel vehicles emitted more $CH_4$ than Euro 5 vehicles. As a result, it was confirmed that LNT-equipped vehicles emitted a high level $CH_4$ and the level exceeded the US emission standard. In order to determine the reason, various prior literature was investigated. However, it was difficult to find a detailed study on the methane increase with LNT. In this paper, to determine whether the characteristics of vehicles equipped with LNT the affects the above issue and other greenhouse gases, 6 passenger cars were tested on several emission test modes and ambient temperatures with a environment chamber chassis dynamometer. 2 cars of these were equipped with LNT only, other 2 cars had SCR only, and LNT + SCR were applied to remaining 2 cars. The test result shown that the vehicles equipped with LNT emitted more $CH_4$ than the vehicles with SCR only. Also, $CH_4$ tended to increase as the higher acceleration of the test mode. However, as the test temperature decreases, $CH_4$ tended to decreased. $CO_2$ was not affected by kinds of De-NOx device but characteristic of the test modes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.171-178
• /
• 2014

From now on, in order to meet more stringer diesel emission standard, diesel vehicle should be equipped with emission after-treatment devices as NOx reduction catalyst and particulate filters. Urea-SCR is being developed as the most efficient method of reducing NOx emissions in the after-treatment devices of diesel engines, and recent studies have begun to mount the urea-SCR device for diesel passenger cars and light duty vehicles. That is because their operational characteristics are quite different from heavy duty vehicles, urea solution injection should be changed with other conditions. Therefore, the number and diameter of the nozzle, injection directions, mounting positions in front of the catalytic converter are important design factors. In this study, major design parameters concerning urea solution injection in front of SCR are optimized by using a CFD analysis and Taguchi method. The computational prediction of internal flow and spray characteristics in front of SCR was carried out by using STAR-CCM+7.06 code that used to evaluate $NH_3$ uniformity index($NH_3$ UI). The design parameters are optimized by using the $L_{16}$ orthogonal array and small-the-better characteristics of the Taguchi method. As a result, the optimal values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance(ANOVA). The compared maximize $NH_3$ UI and activation time($NH_3$ UI 0.82) are numerically confirmed that the optimal model provides better conversion efficiency of $NH_3$. In addition, we propose a method to minimize wall-wetting around the urea injector in order to prevent injector blocks caused by solid urea loading. Consequently, the thickness reduction of fluid film in front of mixer is numerically confirmed through the mounting mixer and correcting injection direction by using the trial and error method.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.2
• /
• pp.25-34
• /
• 2012

It is expected reasonably that firms are likely to be motivated to engage in cooperate social responsibility(CSR) more effectively and efficiently in order for sustainable growth when partnerships on supply chain are willing to embrace the initiative for CSR actively rather than a firm's effort. Given that this is a SCM(Supply Chain Management) approach to CSR, the SC-CSR(Cooperate Social Responsibility in Supply Chain), which encourage all partners on supply chain to apply it, can provide larger social impact. This study is to verify the effect of SC-SCR on the willingness to initiate CSR in small and medium-sized enterprises. As a result of empirical analysis, the application of SC-SCR has positive effect on the willingness of small and medium-sized enterprises to initiate social responsibility by promoting the situational needs. This results indicates that helping firms observe ISO 26000, the recognized international standard for CSR, the motivation for SCR can be reinforced by making partners on supply chain respect CSR.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1412-1415
• /
• 2012

Return signals of a ground penetrating radar(GPR) for mine detection at various frequencies and soil moisture contents are analyzed in this paper. We first compute the dielectric constant, conductivity and attenuation loss based on clay loam which is Korea standard soil. The mine-detection images of GPR at various frequencies are also obtained using the finite-difference time-domain(FDTD) technique. Then, the signal-to-clutter ratio(SCR) and received power of the radar are studied. It is shown that the variable frequency channels are suitable for a GPR to detect landmines at various soil conditions.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.63-68
• /
• 2014

Electrostatic Discharge(ESD) protection performance of PPS(PMOS pass structure) embedded N-type silicon controlled rectifier(NSCR_PPS) device with different partial p-well(PPW) structure was discussed for high voltage I/O applications. A conventional NSCR_PPS standard device shows typical SCR-like characteristics with low on-resistance, low snapback holding voltage and low thermal breakdown voltage, which may cause latch-up problem during normal operation. However, our proposed NSCR_PPS devices with modified PPW demonstrate the stable ESD protection performance with high latch-up immunity.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.61-66
• /
• 2009

Purpose: Glomerular filtration rate (GFR) is considered as the best overall index for the level of renal function, diagnosis of doubtful kidney disease, progress observation from chronic kidney disease and is measured with the various methods. In this study, We measured standard GFR by Gates method and attempted to compare the result with serum creatinin-based, Cockcroft-Gault(C-G) formula and Modification of Diet in Renal Disease (MDRD) formula. Materials and methods: 217 patients (127 men, 90 women, mean age $51.3{\pm}16.9$) with various renal function were examined. we compared the GFR using $^{99m}Tc$-DTPA (Gates), C-G formula and MDRD formula. Results: Significant correlations were noted between 2 different GFR estimates (from C-G formula: r=0.864, p<0.0001, MDRD formula: r=0.831, p<0.0001) and $^{99m}Tc$-DTPA (Gates) GFR. Average of serum creatinine (Scr) was measured with $3.0{\pm}3.1\;mg/dL$, In patients with normal renal function (Scr<1.5 mg/dL), $^{99m}Tc$-DTPA (Gates) GFR was statistically significant to C-G formula (p<0.0001) and MDRD formula (p<0.0001). In patients with mild to moderate renal insufficiency (1.5$^{99m}Tc$-DTPA (Gates) GFR was not statistically significant to C-G formula (p=0.181) and MDRD formula (p=0.127). In patients with severe renal insufficiency (Scr>4.0mg/dL), $^{99m}Tc$-DTPA (Gates) GFR was statistically significant to C-G formula and MDRD formula (p<0.0001). Conclusions: Glomerular filtration rate using Gates method was closly correlated to C-G formula and MDRD formula. In patients with normal renal function, $^{99m}Tc$-DTPA (Gates) GFR was significantly lower than C-G formula and MDRD formula. In patients with mild to moderate renal insufficiency, $^{99m}Tc$-DTPA (Gates) GFR was simmilar with C-G formula and MDRD formula. In patients with severe renal insufficiency, $^{99m}Tc$-DTPA (Gates) GFR was significantly higher than C-G formula and MDRD formula. None of the three different methods was clearly superior to the others.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.384-390
• /
• 2020

The reverberation effect on the sound when producing movies or VR contents is a very important factor in the realism and liveliness. The reverberation time depending the space is recommended in a standard called RT60(Reverberation Time 60 dB). In this paper, we propose a scene recognition technique for automatic reverberation editing. To this end, we devised a classification model that independently trains color images and predicted depth images in the same model. Indoor scene classification is limited only by training color information because of the similarity of internal structure. Deep learning based depth information extraction technology is used to use spatial depth information. Based on RT60, 10 scene classes were constructed and model training and evaluation were conducted. Finally, the proposed SCR + DNet (Scene Classification for Reverb + Depth Net) classifier achieves higher performance than conventional CNN classifiers with 92.4% accuracy.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.272-279
• /
• 2016

In this paper, a new structure for an advanced high holding voltage silicon controlled rectifier (AHHVSCR) is proposed. The proposed new structure specifically for an AHHVSCR-based electrostatic discharge (ESD) protection circuit can protect integrated circuits from ESD stress. The new structure involves the insertion of a PMOS into an AHHVSCR so as to prevent a state of latch-up from occurring due to a low holding voltage. We use a TACD simulation to conduct a comparative analysis of three types of circuit - (i) an AHHVSCR-based ESD protection circuit having the proposed new structure (that is, a PMOS inserted into the AHHVSCR), (ii) a standard AHHVSCR-based ESD protection circuit, and (iii) a standard HHVSCR-based ESD protection circuit. A circuit having the proposed new structure is fabricated using $0.18{\mu}m$ Bipolar-CMOS-DMOS technology. The fabricated circuit is also evaluated using Transmission-Line Pulse measurements to confirm its electrical characteristics, and human-body model and machine model tests are used to confirm its robustness. The fabricated circuit has a holding voltage of 18.78 V and a second breakdown current of more than 8 A.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.92-97
• /
• 2000

An AMR(Adaptive Multi-Rate) speech coding algorithm has been adopted as a standard speech codec for IMT-2000. It is based on the algebraic CELP, and consists of eight speech coding modes having the bit rate from 4.75 kbit/s to 12.2 kbit/s. It also contains the VAD(Voice Activity Detector), SCR (Source Controlled Rate) operation, and error concealment scheme for robustness in a radio channel. The bit rate of AMR is changed on a frame basis depending on the channel condition. In this paper, we introduced AMR speech coding algorithm and performed the real-time implementation using TMS320C6201, i.e., a Texas Instrument's fixed-point DSP. With the ANSI C source code released from ETSI and 3GPP, we convert and optimize the program to make it run in real time using the C compiler and assembly language. It is verified that the decoded result of the implemented speech codec on the DSP is identical with the PC simulation result using ANSI C code for test sequences. Also, actual sound input/output test using microphone and speaker demonstrates its proper real-time operation without distortions or delays.