• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.189-200
• /
• 2023

As urbanization and industrialization increase development in downtown areas, damage due to ground settlement continues to occur. Building collapse in urban has a high risk of leading to large-scale damage to life and property. However, there has rarely been studied on measurement data analysis methods when uneven loads are applied to the excavated ground and no prior knowledge of the ground. Accordingly, it was attempted to analyze the relative settlement behavior and correlation by processing the time-series surface settlement of construction sites in the urban. In this paper, the average index of difference in settlement and average of relative difference in settlement are defined and calculated, then plotted in the coordinate system to analyze the relative settlement behavior over time. In addition, since there was no prior knowledge of the ground, a standard to classify the clusters was needed, and the observation points were classified into using k-means clustering and Dunn Index. As a result of the analysis, it was confirmed that all the clusters moved to the stable region as the settlement amount converges. The clusters were segmented. Based on the analysis results, it was possible to distinguish between the independent displacement area and same behavior area by analyzing the correlation between measurement points. If possible to analyze the relative settlement behavior between the stations and classify the behavior areas, it can be helpful in settlement and stability management, such as uplift of the surrounding area, prediction of ground failure area, and prevention of activity failure.

• Journal of Dairy Science and Biotechnology
• /
• v.41 no.1
• /
• pp.9-25
• /
• 2023

Yogurt fermentation is known to be beneficial because it provides a low pH and harsh environment for foodborne pathogens and improves organoleptic properties. Additionally, organic acids produced through fermentation have a good effect on the viscosity and gelling properties of yogurt. Several potential health benefits of probiotic and generally recognized as safe strains have been suggested. Yogurt is the preferred vehicle for delivering probiotics to health-conscious consumers. Therefore, manufacturers of probiotic beverages must comply with the relevant regulations. The development of probiotic yogurt begins with the selection of strains with safety and functional properties of probiotics. The selected probiotic strain should be technically suitable for viability and improve organoleptic quality while maintaining the number of bacteria above the standard value during processing and storage conditions. In addition, the efficacy of probiotic strains contained in yogurt should be investigated, confirmed, and approved according to well-designed clinical trials. Although various methods are used to detect probiotic strains, the recently widely used next generation sequencing method can be actively utilized. In the future, more research should be conducted with the latest methods to identify probiotic functions and accurately detect probiotic strains.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.3
• /
• pp.117-124
• /
• 2023

Through reorganization in 2008, The ministry of Agriculture, Food and Rural Affairs integrated management of the food industry by transferred functions which was scattered in the Ministry of Health and Welfare, and established comprehensive policies covering the primary, secondary, and tertiary industries. In the agricultural industry sector, new business concepts such as smart farm and food tech have recently emerged alongside the fourth industrial revolution. In order for the Ministry of Agriculture, Food, and Rural Affairs to develop appropriate policies for the fourth industrial revolution, it is necessary to accurately estimate the size of agricultural and livestock-related businesses. In 2017, the Ministry of Agriculture, Food, and Rural Affairs initiated research for the agriculture, livestock and food industry's special classification, which was approved by the National Statistical Office in 2020. The estimation of the agriculture, livestock and food industry's size based on special classification is crucial because it has a substantial impact on the formulation and significance of policies. In this paper, the appropriate rate was derived from samples extracted from the special classification and the Korean standard industrial classification. Proposed are a method for estimating the population of the agricultural and livestock food industry, as well as a method for calculating the appropriate rate that more accurately reflects the population than the method currently in use.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.6
• /
• pp.267-274
• /
• 2023

In this paper, a method for estimating the illuminant chromaticity of a scene for an input image is proposed. The illuminant chromaticity is estimated using the illuminant reference region. The conventional method uses a certain number of reference lighting information. By comparing the chromaticity distribution of pixels from the input image with the chromaticity set prepared in advance for the reference illuminant, the reference illuminant with the largest overlapping area is regarded as the scene illuminant for the corresponding input image. In the process of calculating the overlapping area, the weights for each reference light were applied in the form of a Gaussian distribution, but a clear standard for the variance value could not be presented. The proposed method extracts an independent reference chromaticity region from a given reference illuminant, calculates the characteristic values in the r-g chromaticity plane of the RGB color coordinate system for all pixels of the input image, and then calculates the independent chromaticity region and features from the input image. The similarity is evaluated and the illuminant with the highest similarity was estimated as the illuminant chromaticity component of the image. The performance of the proposed method was evaluated using the database image and showed an average of about 60% improvement compared to the conventional basic method and showed an improvement performance of around 53% compared to the conventional Gaussian weight of 0.1.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.685-690
• /
• 2023

It was analyzed that the volume of deep excavation works adjacent to existing underground structures is increasing according to the population growth and density of cities. Currently, many underground structures and tracks are damaged by external factors, and the cause is analyzed based on the measurement results in the tunnel, and measurements are being made for post-processing, not for prevention. The purpose of this study is to analyze the effect on the deformation of the structure due to the excavation work adjacent to the urban railway track in use. In addition, the safety of structures is evaluated through machine learning techniques for displacement of structures before damage and destruction of underground structures and tracks due to external factors. As a result of the analysis, it was analyzed that the model suitable for predicting the structure management standard value time in the analyzed dataset was a polynomial regression machine. Since it may be limited to the data applied in this study, future research is needed to increase the diversity of structural conditions and the amount of data.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.3
• /
• pp.119-126
• /
• 2023

Sarcopenia is not well known enough to be classified as a disease in 2021 in Korea, but it is recognized as a social problem in developed countries that have entered an aging society. The diagnosis of sarcopenia follows the international standard guidelines presented by the European Working Group for Sarcopenia in Older People (EWGSOP) and the d Asian Working Group for Sarcopenia (AWGS). Recently, it is recommended to evaluate muscle function by using physical performance evaluation, walking speed measurement, and standing test in addition to absolute muscle mass as a diagnostic method. As a representative method for measuring muscle mass, the body composition analysis method using DEXA has been formally implemented in clinical practice. In addition, various studies for measuring muscle mass using abdominal images of MRI or CT are being actively conducted. In this paper, we develop an AI image segmentation model based on abdominal images of CT with a relatively short imaging time for the diagnosis of sarcopenia and describe the multicenter validation. We developed an artificial intelligence model using U-Net that can automatically segment muscle, subcutaneous fat, and visceral fat by selecting the L3 region from the CT image. Also, to evaluate the performance of the model, internal verification was performed by calculating the intersection over union (IOU) of the partitioned area, and the results of external verification using data from other hospitals are shown. Based on the verification results, we tried to review and supplement the problems and solutions.

• Journal of Korean Elementary Science Education
• /
• v.42 no.1
• /
• pp.178-193
• /
• 2023

The aim of this study was to investigate differences in the achievement standards from the 2015 to the 2022 revised national science curriculum and to present the implications for science teaching under the revised curriculum. Achievement standards relevant to primary science education were therefore extracted from the national curriculum documents; conceptual domains in the two curricula were analyzed for differences; various kinds of centrality were computed; and the Louvain algorithm was used to identify clusters. These methods revealed that, in the revised compared with the preceding curriculum, the total number of nodes and links had increased, while the number of achievement standards had decreased by 10 percent. In the revised curriculum, keywords relevant to procedural skills and behavior received more emphasis and were connected to collaborative learning and digital literacy. Observation, survey, and explanation remained important, but varied in application across the fields of science. Clustering revealed that the number of categories in each field of science remained mostly unchanged in the revised compared with the previous curriculum, but that each category highlighted different skills or behaviors. Based on those findings, some implications for science instruction in the classroom are discussed.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.445-451
• /
• 2021

In this study, we described the production of an antibody to living modified organisms (LMOs) containing the gene encoding for 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) from Agrobacterium tumefaciens strain CP4 EPSPS provides resistance to the herbicide glyphosate (N- (phosphonomethyl) glycine). These LMOs were approved and have recently been used in the feed, food production, and processing industries in South Korea. Highly efficient monoclonal antibody (mAb) production is crucial for developing assays that enable the proper detection and quantification of the CP4 EPSPS protein in LMOs. This study describes the purification and characterization of recombinant CP4 EPSPS protein in E. coli BL21 (DE3) based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and matrixassisted laser desorption/ionization time-of-flight mass spectrometry. The production of mAbs was undertaken based on the standard operating procedure of Abclon, Inc.(South Korea), and the purity of the mAbs was assessed using SDS-PAGE. The following five mAb clones were produced: 2F2, 4B9, 6C11, 10A9, and 10G9. To verify the efficiency and specificity of the five developed mAbs, we performed Western blotting analysis using the LM (living modified) cotton crude extracts. All mAbs could detect the CP4 EPSPS protein in the LM cotton traits MON1445 and MON88913 with high specificity, but not in any other LM cottons or non-LM cottons. These data indicate that these five mAbs to CP4 EPSPS could be successfully used for the further development of antibody-based detection methods to target CP4 EPSPS protein in LMOs.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.217-228
• /
• 2009

Data analysis applications typically aggregate data across many dimensions looking for unusual patterns in data. Even though such applications are usually possible with standard structured query language (SQL) queries, the queries may become very complex. A complex query may result in many scans of the base table, leading to poor performance. Because online analytical processing (OLAP) queries are usually complex, it is desired to define a new operator for aggregation, called the data cube or simply cube. Data cube supports OLAP tasks like aggregation and sub-totals. Many aggregate functions can be used to construct a data cube. Those functions can be classified into three categories, the distributive, the algebraic, and the holistic. It has been thought that the distributive functions such as SUM, COUNT, MAX, and MIN can be used to construct a data cube, and also the algebraic function such as AVG can be used if the function is replaced to an intermediate function. It is believed that even though AVG is not distributive, but the intermediate function (SUM, COUNT) is distributive, and AVG can certainly be computed from (SUM, COUNT). In this paper, however, it is found that the intermediate function (SUM COUNT) cannot be applied to OLAP cubes, and consequently the function leads to erroneous conclusions and decisions. The objective of this study is to identify some problems in applying aggregate function AVG to OLAP cubes, and to design a process for solving these problems.

• Journal of Technologic Dentistry
• /
• v.45 no.2
• /
• pp.31-38
• /
• 2023

Purpose: This in vitro study aimed to compare the trueness of 3-unit fixed dental provisional prostheses (FDPs) fabricated by three different additive manufacturing and subtractive manufacturing procedures. Methods: A reference model with a maxillary left second premolar and the second molar prepped and the first molar missing was scanned for the fabrication of 3-unit FDPs. An anatomically shaped 3-unit FDP was designed on computer-aided design software. 10 FDPs were fabricated by subtractive (MI group) and additive manufacturing (stereolithography: SL group, digital light processing: DL group, liquid crystal displays: LC group) methods, respectively (N=40). All FDPs were scanned and exported to the standard triangulated language file. A three-dimensional analysis program measured the discrepancy of the internal, margin, and pontic base area. As for the comparison among manufacturing procedures, the Kruskal-Wallis test and the Mann-Whitney test with Bonferroni correction were evaluated statistically. Results: Regarding the internal area, the root mean square (RMS) value of the 3-unit FDPs was the lowest in the MI group (31.79±6.39 ㎛) and the highest in the SL group (69.34±29.88 ㎛; p=0.001). In the marginal area, those of the 3-unit FDPs were the lowest in the LC group (25.39±4.36 ㎛) and the highest in the SL group (48.94±18.98 ㎛; p=0.001). In the pontic base area, those of the 3-unit FDPs were the lowest in the LC group (8.72±2.74 ㎛) and the highest in the DL group (20.75±2.03 ㎛; p=0.001). Conclusion: A statistically significant difference was observed in the RMS mean values of all the groups. However, in comparison to the subtractive manufacturing method, all measurement areas of 3-unit FDPs fabricated by three different additive manufacturing methods are within a clinically acceptable range.