• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1125-1130
• /
• 2015

In this paper, a method to identify components per unit task system is expressed with node, module, and interface. We define security subject per unit task system and explain node, module, and interface per component. According to the defined security standard in design phase, we also perform to design and elaborate security attributes for node and module as identified security subjects in their defined tables. And then we describe the composition standard for security attribute design with some examples, after classifying it into security subject, access subject, access control area, identification or verification area, and encryption.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.67-76
• /
• 2007

Data used for the SFP module are stored in A0 and A2 memory area based on the SFP-MSA standard. In this paper the auto set-up program for SFP module has been designed and implemented. In order to make the Digital Diagnostic Monitoring Interface, the specific value has been written into the designated register via RS232 communication channel in the LD Driver IC. The Agilent VEE is used as a programming language for factory automation, and optical characteristics of SFP module and SFP-MSA standard are main structure of the implementation. The implemented program has been applied to the manufacturing field and the system gains a higher effect than the result of 6-Sigma.

• Journal of the Korean Society of Visualization
• /
• v.20 no.3
• /
• pp.102-108
• /
• 2022

In the fan module of the intercooling refrigerator, a drain hole structure was designed for stable drainage of defrost water. However, the airflow passing through the drain hole can disturb flow features around the evaporator. Since this backflow leads to an increase in flow loss, the accurate experimental and numerical analyses are important to understand the flow characteristics around the fan module. Considering the complex geometry around the fan module, three different turbulence models (Standard k-ε model, SST k-ω model, Reynolds stress model) were used in computational fluid dynamics (CFD) analysis. According to the quantitative and qualitative comparison results, the Standard k-ε model was most suitable for the research object. High-accuracy results well match with the experiment result and overcome the limitation of the experiment setup. The method used in this study can be applied to a similar research object with an orifice outflow driven by a rotating blade.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.846-858
• /
• 2014

The purpose of this study is to help domestic aquaculture farm by improved evaluation method. First, We analyzed evaluation method of domestic aquaculture certification, the greater retailer's supplier and global standard. Next, By using Analytic Hierarchy Process (AHP), We found priority and importance between criteria of SQF(Safety Quality Food) standard which is appled to alternative model for aquaculture evaluation. As a result is presented as follows: regarding pairwise comparison between System Element module and Good Aquaculture Practice(GAP) module, GAP is recognized to be more important than System Element. The highest priority criteria is presented 'Purchase and Use of Medications, Aquaculture Feeds and Aquaculture Chemicals.' Next, 'Management commitment', 'Attaining Food Safety', 'Location and Layout of Structures and Vessels', 'Stock Identification and Traceability are recognized high position. This study has major implications for research into development of evaluation method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.117-118
• /
• 2012

As the technical standard of hydrographic data was transferred from S-57 to S-101, a standard system was set up for producing the next generation ENCs but also various maritime safety information. ECDIS that display a S-57 ENC and include a navigation support function, should be developed considering new standard. S-10X data and e-Nav information can be used in this system. In this study, an implementation mechanism of S-100 standard was analyzed for design of navigation support system based on S-100. From the results, it was designed as loading module of S-10X data, display module of SENC, navigation supporting module. Also, this study considered a next generation ENC, a bathymetric grid data, an electronic nautical publication as an input information.

• Journal of Distribution Science
• /
• v.21 no.2
• /
• pp.45-52
• /
• 2023

Purpose: The Malaysia Education Blueprint is primarily concerned with the transformation of students' minds through the curriculum offered at the school level (2013-2025). Diversity in the application of teaching and learning methods is one means of achieving the transformation of students' minds through the Secondary School Standard Curriculum. Consequently, the production of ExSheetLink's Module for Accounting Education is the primary outcome of this study, which had three objectives: the need for ExSheetLink's Module in the process of producing financial statements for Accounting Students in secondary school to the Accounting Teacher; and the design of ExSheetLink's Module that meets the entire process in the production of financial statements for Accounting Students in secondary school based on the Documents Curriculum and the Accounting Students' needs. Research design, data and methodology: This study outlines the research framework for module development in accordance with the Design and Development Research Method, which combines multiple research techniques (Mixed Method). Results: The development of ExSheetLink's Module is completed and can be used for the level of effectiveness purposes. Conclusion: The transformation of Accounting Students' minds is a success thanks to the ExSheetLink Module. Researchers also suggested that all Malaysian Secondary School accounting students test the ExSheetLink Module.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.119-120
• /
• 2012

The International Hydrographic Organization (IHO) developed S-100 standards as a framework for a variety of data and service for hydrography and a standard research is in process, including a next-generation electronic chart standard, for products and services based on this.The need for standard storage and utilization of navigation routes generated by ECDIS and navigation system using navigation planning features has emerged and a standard research based on S-100 standard has been performed. Route information standard is needed for interoperability among route information generated by a variety of navigation system and requires an examination for the possibility of applicability. In this research, route generation tools and standard-based generation and result of route information using these tools in order to examine the application of route information standards have been executed.In details, first, as a module capable of generating route information, a module that can store values in memory based on route information standards of S-100, second, a module that can store route information in the memory in XML form, third, it includes loading module for route information stored as XML.In this research, we verified normal generation of route information, storage of generated route information and loading functions through developing three modules.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.742-745
• /
• 2004

If a personal robot is popularized like a personal computer in the future, many kinds of robots will appear and the number of manufacturers will increase as a matter of course. In such circumstances, it can be inefficient, in case each manufacturer makes a whole platform individually. The solutions for this problem are to modularize a robot component (hardware and software) functionally and to standardize each module. Each module is developed and sold by each special maker and a consumer purchases desired modules and integrates them. The standardization of a module includes the unification of electrical and mechanical interface. In this paper, the standard interfaces of modules are proposed and CMR(Component Modularized Robot)-P2 made with the modules(brain, sensor, mobile, arm) is introduced. In order to simplify and to make the modules light, a frame is used for supporting a robot and communication/power lines. The name of a method and the way to use that are defined dependently on the standard interfaces in order to use a module in other modules. Each module consists of a distributed object and that can be implemented in the random language and platform. The sensor, mobile and arm modules are developed on Pentium or ARM CPU and embedded Linux OS using the C programming language. The brain module is developed on Pentium CPU and Windows OS using the C, C++ and RPL(Robot Programming Language). Also tasks like pass planning, localization, moving, object perception and face perception are developed. In our test, modules got into gear and CMR-P2 executed various scenarios like guidance, errand and guarding completely.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.4
• /
• pp.214-221
• /
• 2003

This paper shows an implementation of video codec (coder/decoder) on an embedded system. The video codec supports both H.261 and H.263 standards. For efficient real-time processing, the video codec is partitioned into a software module and a hardware module. Both modules are codesigned on an embedded system. The software module is processed on a real-time operating system and a RISC processor. It cooperates with the hardware module to compress and decompress images in real time. AMBA (Advanced Microcontroller Bus Architecture) AHB (Advanced High-performance Bus) is used as the system bus. The hardware module works both as AHB masters and as AHB slaves. The encoder part of the hardware module operates in a pipelines mode to compress images in real time. The video codec compresses 15 CIF frames and simultaneously decompresses 15 CIF frames in a second according to H.261 or H.263 standard at 33 MHz frequency.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.4
• /
• pp.79-91
• /
• 2008

Modern society as an information society, a lot of information is communicated in on-line. Specially, mobile environment based on radio communication has a characteristic of flexibility compared with wire communication and is developed rapidly. However, the more mobile technology is developed the more security for sensitive information is needed. Therefore, MTM(Mobile Trusted Module) is developed and promoted by TCG(Trusted Computing Group), which is an industry standard body to enhance the security level in the mobile computing environment. MTM, hardware security module for mobile environment, offers user's privacy protection, platform integrity verification, and individual platform attestation. On the other hand, secure migration scheme is required in case secret data or key is transferred from one platform to the other platform. In this paper, we analyze migration schemes which were described in TCG standard and other papers and then propose security maintenance scheme for secret data using USIM(Universal Subscriber Identity Module).