• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2921-2927
• /
• 2011

Modal Shift from road to rail has been adapted in several countries as one of effective ways of reducing $CO_2$ emissions caused by transport. Generally, effect analysis of $CO_2$ reduction toward modal shift is calculated mainly from use stage and less consideration from other stages of life cycle, even though, in some case of modal shift needs that new line construction or new vehicle manufacturing. In this study, modal shift effect analysis is performed with considering construction, manufacturing vehicle and use stage. As a result we can get total $CO_2$ reduction effect using life cycle thinking and check the necessity of including other life cycle stage not only considering use stage. In conclusion, there is no $CO_2$ reduction effect if the reduction amount of $CO_2$ in use stage is not bigger than allocated annual amount of $CO_2$ in construction and manufacturing vehicle stage. According to this fact, analysing $CO_2$ reduction effect of Modal Shift should be considered not only the use stage.

• Progress in Superconductivity
• /
• 제1권2호
• /
• pp.105-109
• /
• 2000

We have designed and fabricated a single-flux-quantum(SFQ) four-stage shift register using YBCO bicrystal Josephson junctions, and tested its operations using a digital measurement set-up. The circuit consists of 4 shift register stages and a read SQUID placed next to each side of the shift register. Each SQUID was inductively coupled to the nearby shift register stage. The major obstacle in testing the circuits was the interference between the two read SQUIDs, and we could get over the problem by determining the correct operation points of the SQUID from the simultaneously measured modulation curves. Loaded data ('1' or '0') were successfully shifted from a stage to the next by a controlled current pulse injected to the bias lines located between the stages, and the corresponding correct data shifts were observed with the two read SQUIDs.

• ETRI Journal
• /
• 제31권3호
• /
• pp.282-291
• /
• 2009

An online mean-shift object tracking algorithm, which consists of a learning stage and an estimation stage, is proposed in this work. The learning stage selects the features for tracking, and the estimation stage composes a likelihood image and applies the mean shift algorithm to it to track an object. The tracking performance depends on the quality of the likelihood image. We propose two schemes to generate and integrate likelihood images: one based on the discrete AdaBoost (DAB) and the other based on the real AdaBoost (RAB). The DAB scheme uses tuned feature values, whereas RAB estimates class probabilities, to select the features and generate the likelihood images. Experiment results show that the proposed algorithm provides more accurate and reliable tracking results than the conventional mean shift tracking algorithms.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.83-86
• /
• 2001

We have fabricated a single flux quantum 4-stage shift register with interface-controlled $Y_1$$Ba_2$$Cu_3$$O_{7-x}$(YBCO) Josephson junction. The YBCO Josephson junctions showed RSJ-like current-voltage(I-V) curves at temperatures 45~80K. We tested load and shift operation of shift register with binary data sequences “1000”, “1010”, “1011”, and “1111” at 58K. For all the binary data sequences, the shift register operated successfully. By operating the circuit with proper current pulses, we observed no errors during at least 12 hours operation for all the data sequences.s.

• Journal of Preventive Medicine and Public Health
• /
• 제33권1호
• /
• pp.25-30
• /
• 2000

Objectives : This study was performed to evaluate the effect of stage shift according to screening of stomach cancer. Methods : Total 840 cases of stomach cancer patients, undergone a surgical operation at Department of Surgery, Kangnam St. Mary's Hospital, The Catholic University of Korea from Jan. 1989 to Dec. 1995, were reviewed by stomach cancer working sheet, and classified as asymptomatic and symptomatic group based on the presence of subjective symptoms on their hospital visit. Their histopathologic stages were analysed. We compared the histopathologic stages of asymptomatic stomach cancer patients with those of symptomatic patients. Results : From the total of 840 patients, asymptomatic patients group comprised 28 cases (3.3%). Proportion of asymptomatic patients tended to increase from 1.9% in 1990, 0.9% in 1991 to 8.6% in 1995. Proportions of asymptomatic patients by stages were 78.6% (stage I), 3.6% (stage III), 17.9% (stage IV) and that of symptomatic patients by stages were 38.2% (stage I), 16.5% (stage II), 24.8% (stage III), 19.1% (stage IV). In less than 40 years old, 50.5% of symptomatic patients were diagnosed as stage I. With increment of ages, proportions of stage I were makedly decreased. It was significantly different between proportion of early gastric cancer in asymptomatic patients (60.1%) and that in symptomatic patients (25.0%). Conclusions : We confirmed stage shift according to screening of stomach cancer. And proportion of early gastric cancer in asymptomatic patients was higher than that in symptomatic patients. This results suggest that screening of gastric cancer be important to reduce mortality and if be indirectly started from 40 years old.

• 대한전자공학회논문지TC
• /
• 제47권11호
• /
• pp.97-104
• /
• 2010

본 논문은 고성능32비트 AES구조를 제시한다. 재배열 구조는 5단 파이프라인을 사용한다. 그 안에 ShiftRows/InvShiftRows 모듈은 4단 파이프라인을 사용하고 MixColumn/InvMixColumn 모듈은 1단 파이프라인을 사용한다. Shift rows와 inverse shift rows 같은 구조를 사용한다. Mix column 과 inverse mix column 도 같은 구조를 사용한다. 그리고 RCON구조를 단순화 하여 사이즈를 줄였다. 제안된 구조는 verilogHDL 을 이용하여 구현 하였다. 이 회로의 처리량은 415Mbits/s 이고 크기는 0.18um CMOS 공정에서 13,764 게이트 이다. 재배열 구조는 무선 네트워크 라우터에서 사용할 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.156.2-156.2
• /
• 2011

본 연구에서는 일단 수성가스전이반응 (Single stage water gas shift reaction)을 위해 높은 활성을 가진 백금 담지 촉매를 함침법 (Incipient wetness impregnation method)으로 제조하여 높은 공간 속도 (Gas hourly space velocity) $45,515h^{-1}$에서 담체에 따른 촉매 활성을 평가하였다. 담체는 $CeO_2$, $ZrO_2$, MgO, MgO-$Al_2O_3$ (MgO = 30 wt%) 그리고 $Al_2O_3$를 사용하였으며 백금의 담지량은 1 wt%로 고정하였다. BET, XRD, TPR, CO-chemisorption 분석을 통하여 담체의 구조적 특성이 촉매 활성에 미치는 영향에 대하여 조사하였다.

• Journal of Information Display
• /
• 제12권1호
• /
• pp.61-67
• /
• 2011

A single-clock-driven shift register and a two-stage buffer are proposed, using p-type, low-temperature polycrystalline silicon thin-film transistors. To eliminate the clock skew problems and to reduce the burden of the interface, only one clock signal was adopted to the shift register circuit, without additional reference voltages. A two-stage, p-type buffer was proposed to drive the gate line load and shows a full-swing output without threshold voltage loss. The shift register and buffer were designed for the 3.31" WVGA ($800{\times}480$) LCD panel, and the fabricated circuits were verified via simulations and measurements.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.751-770
• /
• 2016

Purpose: Two-stage ${\bar{X}}$ chart is a useful tool for process control when a surrogate variable may be used together with a performance variable. This paper extends the two-stage ${\bar{X}}$ chart to a three stage version by decomposing the first stage into the preliminary stage and the main stage. Methods: The expected cost function is derived using Markov-chain approach. The optimal designs are found for numerical examples using a genetic algorithm combined with a pattern search algorithm and compared to those of the two-stage ${\bar{X}}$ chart. Sensitivity analysis is performed to see the parameter effects. Results: The proposed design outperforms the optimal design of the two-stage ${\bar{X}}$ chart in terms of the expected cost per unit time unless the correlation between the performance and surrogate variables is modest and the shift in process mean is smallish. Conclusion: Three-stage ${\bar{X}}$ chart may be a useful alternative to the two-stage ${\bar{X}}$ chart especially when the correlation between the performance and surrogate variables is relatively high and the shift in process mean is on the small side.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.225-232
• /
• 2007

This work intends to investigate the effects of shift characteristics on the propulsion performance of a manual wheelchair with an automatic transmission. A planetary gear train is employed to generate a two-stage shift automatically, based on the distance traveled from rest. Motion analysis has been performed for measuring kinematic properties of the arm and then the inverse dynamics has been applied for estimating joint forces/torques. Then, a parametric study has been performed to find a set of the shift ratios and the shift intervals for optimizing propulsion performance. Results show that the propulsion performance is closely related to the shift condition. It is found that a short shift interval is desirable for a short distance propulsion. However, an optimum shift interval for a long distance propulsion is inversely proportional to the shift ratio approximately. Consequently, the automatic transmission can greatly lower the joint loadings by the speed reduction, which eventually contribute to prevent joint injuries of wheelchair users.