• Journal of Engineering Education Research
• /
• v.10 no.3
• /
• pp.79-92
• /
• 2007

To enhance the excellence, effectiveness and economical efficiency in the learning process, we implement a hybrid educational system for engineering experiments where web-based virtual laboratory systems and distance education systems are properly integrated. In the first stage, we designed client/server distributed environment and developed web-based virtual laboratory systems for digital systems and electrical/electronic circuit experiments. The proposed virtual laboratory systems are composed of four important sessions and their management system: concept learning session, virtual experiment session, assessment session. With the aid of the management system every session is organically tied up together to achieve maximum learning efficiency. In the second stage, we have implemented efficient and cost-effective distant laboratory systems for practicing electric/electronic circuits, which can be used to eliminate the lack of reality occurred during virtual laboratory session. The use of simple and user-friendly design allows a large number of people to access our distant laboratory systems easily. Thus, self-guided advanced training is available even if a lot of expensive equipment will not be provided in the on-campus laboratories. The proposed virtual/distant laboratory systems can be used in stand-alone fashion, but to enhance learning efficiency we integrated them and developed a hybrid educational system for engineering experiments. Our hybrid education system provides the learners with interactive learning environment and a new approach for the delivery of engineering experiments.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.341-344
• /
• 2005

This research was performed for developing of biological treatment process of odor gas such as MEK, $H_2S$, and toluene, which was generated from the food waste recycling process. To establish the operational conditions of odor gas removal by small-scale biofiltration equipment, it was continuously operated by using toluene as a treating odor object. When the odor treating microorganisms were adhered to fibril form biofilter, high removal efficiency over $93\%$ was obtained by biofilm formation. At 400 ppm of inlet odor gas concentration and 10 sec of retention time, the removal efficiency was $76\%$ and $93\%$ in 1 st stage reactor and End stage reactor, respectively. However, the removal efficiency remained over $97\%$ at the operational conditions above 15 sec of retention time.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.1
• /
• pp.149-153
• /
• 2003

This study was conducted to survey the utilization possibility of composting system of small scale static pile with animal manure produced from cattle shed and the effect of addition of microorganism on the maturity of compost. Microorganisms added in composting substrate were bacteria+lactobacillus(BL)+photo.(BLP). The composting practiced was a windrow system without aeration equipment and turning was practiced periodically. The water content of substrate mixed with cow manure, rice husk, and sawdust was about 60%. The temperature during the composting process was increased at over $60^{\circ}C$ within 3 days after composting starting. Increase of temperature at the early stage of composting was fasten in BLP and BL than Control. Because the pH of the raw material was high, the changes of pH during composting was little and stabilized in weak alkaline condition. EC value was high for accumulation of manure and urine excreted continuously by animal and the changes of those during composting occurred in 5~10% increase. Reduction rates of C/N ratio were the largest as the 22.7% in BLP and 19.2and 17.5% in BL and Control respectively. In the evaluation of phytotoxicity, there was stabilized within the short time in BLP and not the difference between BL and Control. Treatment of animal manure produced from small scale cattle shed was possible by using the small scale static pile composting system with reasonable water content and turning and the addition of microorganism in composting substrate was effected on the temperature increase at the early stage of composting and reduction of plant toxicity compounds but little on the maturity of compost.

• The Journal of Korean Academy of Sensory Integration
• /
• v.15 no.2
• /
• pp.1-21
• /
• 2017

Objective : The aims of the this study is to identify job characteristics, to generate job description, and additionally to investigate duty task of the job for Korean pediatric occupational therapist focused on sensory integration intervention. Methods : In the first stage, job analysis of pediatric occupational therapist focused on sensory integration intervention was performed by an advisory committee consist of the DACUM panel. Through the job analysis, job description with definition was established. In the second stage, a survey was performed for 141 pediatric occupational therapist using a questionnaire based on the job description in order to investigate importance, frequency and difficulty of duty task and task elements of the job. This process was done from May to September 2017. Results : The job definition drew from this study was 'Pediatric occupational therapist provides occupational therapy services to children and adolescents to support occupational performance and social participation including daily activities and play". Through the job description established in this study, 9 duties (consulting, evaluation, intervention plan, intervention, document, education, self-development, management, and administration), 28 tasks and 169 task elements were drew. In the survey, among the duty tasks and task elements, 'ensure physical safety' and 'perform a session' were selected as the most important task, and 'ensure safety of children, sensory integrative equipment and environment' and 'prepare a safe environment' were selected as the most important element. Conclusion : This study defined job demands and characteristics of pediatric occupational therapist who performs sensory integration intervention. It is expected that this study can be used a resource to develop and/or improve educational program related.

• Applied Microscopy
• /
• v.36 no.1
• /
• pp.7-16
• /
• 2006

A new remote access system for a 1.3 MV high voltage electron microscope has been developed. Almost all essential functions for HVEM operation, huck as stage control, specimen tilting, TV camera selection and image recording, are successfully embedded into this prototype of the remote system. Particularly, this system permits perfect and precise operation of the goniometer and also controls the high resolution digital camera via simple Web browsers. Transmission of control signals and communication with the microscope is accomplished via the global ring network for advanced applications development (GLORIAD). This fact makes it possible to realize virtual laboratory to carry out practical national and international HVEM collaboration by using the present system

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.77-85
• /
• 2014

The helical pile has become popular with some constructional advantages because relatively compact equipment is needed for installing helical piles. However, field loading tests for estimating the bearing capacity of helical piles have drawbacks that the required dead load should be as much as the operation load, and reaction piles or anchors are required. In this paper, the bi-directional load test without necessity of reaction piles and loading frames was applied to the helical pile, and the load-settlement curves of the helical piles were measured. The bi-directional load test was performed in two separate stages with the aid of a special hydraulic cylinder whose diameter is equal to that of the pile shaft. In the first stage, the hydraulic cylinder is assembled immediately above the bottom helix plate, and the end bearing capacity of the helical pile is measured. In the second stage, the hydraulic cylinder is assembled above the top helix plate, and the skin friction of the helical pile is measured. The pile loading-test program was carried out for the two different helical piles with the shaft diameter of 89 mm and 114 mm, respectively. However, the configuration of helix plates is identical with three helix plates of 450-, 350-, 200- mm diameter. Results of the bi-directional load test were verified by the conventional static pile loading test. As a result, the bearing capacity estimated by the bi-directional load test is in good agreement with the result of the conventional pile loading test.

• Korean Journal of Acupuncture
• /
• v.38 no.1
• /
• pp.16-31
• /
• 2021

Objectives : The purpose of this study was to investigate the current status of clinical practice for gout in Korean Medicine (KM). Methods : On-line survey was adopted for this study, targeted at KM Doctors who were registered in the Association of Korean Medicine. The questionnaire included the general status of treatment, pattern identification and treatment method according to three stages given: acute, chronic and asymptomatic hyperuricemia stage. Results : Data from a total of 384 respondents was analyzed. Participants who responded most were in their 40s, working in KM clinics located in Seoul. Acupuncture and herbal medicines were the top priority treatments in preparing recommendations in clinical practice guidelines for gout, and where clinical trials were considered essential. As of the past year, the average number of first visits per month was 86.7%, and the average treatment duration was less than 1 month, accounting for 72.9%. As for the diagnostic method used for gout patients, the "diagnosed by clinical pattern" response was the highest, and the "blood and urine test" response was the highest as the diagnostic equipment used. As for the evaluation scale being used, the "VAS/NRS" response was the highest. Regardless of the gout stage, acupuncture was the most commonly used treatment method for gout patients, and bee venom pharmacopuncture was the highest for the pharmacopuncture used. In the case of herbal medicine, it was found that a wider variety of herbal medication uninsured in health insurance and herbal prescription were used for the staged treatment of gout than herbal medication in national health insurance coverage. In clinical practice, "acupuncture treatment three times a week" was the most common, and the "acupoints in the limb" were the most frequently used; LR3 and SP3 were the most frequently used acupoints. Conclusions : It is suggested that this survey should be helpful to develop clinical practice guideline for gout that reflects actual clinical practice.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.2
• /
• pp.1-6
• /
• 2006

The pressure regulator which is used for controlling the reducing pressure in the piezoelectrically driven pneumatic valve has been studied. The pneumatic valve of this study object is 2-stage type and consists of a piezoelectric actuator, a controller, a poppet valve and a pressure regulator. Nominal flow of 50 lpm, maximum operating pressure of 0.9MPa and frequency characteristic of 10Hz and over are required in this pneumatic valve, but the pressure regulator is needed because piezoelectric actuator has no ability to control the pressure of 0.9MPa directly. In this study, bimorph type PZT actuator of $25.2mm(L){\times}7.2mm(W){\times}0.5mm(H)$ with constant of $-220{\times}10-12$ CN-1 was proposed and investigated. Maximum operating force of 0.052 N and maximum displacement of $63{\mu}m$ were gotten from the fabricated PZT actuator. From the analysis results, the orifice diameter of 0.6mm for a piezoelectric actuator was derived and then the pressure regulator which can be operated under 0.15 MPa easily was designed and manufactured. Performance and effects of design parameters were simulated by the Simulink of Matlab software, and it was confirmed that the performance characteristics of manufactured pressure regulator are superior in the common use pressure range of 0.5 MPa to 0.7 MPa. The results show that the proposed pressure regulator is suitable for the pneumatic valve with a PZT actuator.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.3
• /
• pp.346-359
• /
• 2012

This study provides basic guidelines to enrich lecture content and teaching methods for university lecturers about basic clothing construction (flat pattern making). The survey was conducted from October $13^{th}$ to December $20^{th}$ 2010 by mail and e-mail on 96 selected clothing departments in Korean universities to investigate the content, method and condition of the course of basic pattern making. A total of 63.3% of survey respondents were PhD graduates, 80 percent majored 'Apparel Science and Technology', average of total teaching experience was 12.84 years and 40 percent had studied abroad. The surveyed universities were 4 year universities (70%), 2-3 year tenure colleges (27%), and Cyber Universities (3%). The average number of students in a class was 28.08 and the lab space and equipment was evaluated positively only when the number of students was 20 or less. The type of measurements for basic pattern drafting were 'individual student's sizes' (62%), 'ready-made clothes sizing system' (25%), 'professor's experiential sizes' (5%), 'dress form sizes' (3%). In addition, the percentage of using 'ready-made clothes sizing system' increased 13% over the previous study (Lee, 2000). At a basic pattern drafting stage, 'the error of body measurements' in the case of using individual student's sizes, 'the poor results of fitting for students who deviate from standard body size' in the case of using ready-made clothes sizing system, 'the lack of education about fitting' in the case of using dress form sizes had been pointed out as shortcomings. A total of 66% of survey respondents carried out muslin fitting; however, a lack of students and teacher feedback about fitting & alteration of paper patterns remained a problem.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.2
• /
• pp.53-65
• /
• 2000

The objectives of this study are to develop a stormwater management system that would contribute to improving water circulation, recycling storm water and promoting biodiversity in urban areas, to apply the system in an actual site, and to verify its effectiveness in order to generate a stormwater management system applicable in Korea. This study reviewed former researches and case studies, categorized stormwater management system into pre-treatment, retention and infiltration phases, and analyzed the strength and weakness of the techniques by synthesizing unit techniques of each stage. As a result, the process of the stormwater management system includes the following phases: 1) a rubble filtration layer; 2) a retention pond; 3) a infiltration pond; and 4) a stormwater retention pool (recirculation and recycling). Then, an empirical study to design and create the generated system according to the features of a site and to verify its effectiveness was conducted. The future study direction is to verify the effectiveness of the developed stormwater retention and infiltration ponds. To this end, it is planned to perform hydrological monitoring using automatic measuring equipment and monitoring on habitat bases and the biota living on the base. Based on its outcome, the applied model would be refined and improved to develop an alternative stormwater management system that would allow to achieve the improvement of urban water circulation, increase of biodiversity and efficient use of water resources.