• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.234-248
• /
• 1995

A super-heat pump system composed of a suction line heat exchanger, low and high stage economizers, and a screw compressor is simulated to examine the energy performance and design options. CFC12, HCFC22, HFC134a, HCFC22/HCFC142b, HFC32/HFC134a, and HFC125/HFC134a are used as working fluids for comparison. The results indicate that the proposed system charged with appropriate mixtures is up to 33.4% more energy efficient than the normal system with CFC12. The performance of the super-heat pump system charged with mixtures was influenced by such factors as the temperature matching, heat source temperature difference, low stage economizer, and high stage economizer. The fluids with a larger liquid specific heat such as HFC134a would have more benefits when a suction line heat exchanger is installed. 40%HCFC22/60%HCFC142b mixture seems to be a good candidate to replace CFC12. On the other hand, 25%HFC32/75% HFC134a would be a good long term candidate to replace HCFC22.

• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1233-1240
• /
• 2010

In the flat panel display and semiconductor industries, the visual alignment system is considered as a core technology which determines the productivity of a manufacturing line. It consists of the vision system to extract the centroids of alignment marks and the stage control system to compensate the alignment error. In this paper, we develop a Kalman filter algorithm to estimate the alignment mark postures and propose a coarse-fine alignment control method which utilizes both original fine images and reduced coarse ones in the visual feedback. The error compensation trajectory for the distributed joint servos of the alignment stage is generated in terms of the inverse kinematic solution for the misalignment in task space. In constructing the estimation algorithm, the equation of motion for the alignment marks is given by using the forward kinematics of alignment stage. Secondly, the measurements for the alignment mark centroids are obtained from the reduced images by applying the geometric template matching. As a result, the proposed Kalman filter based coarse-fine alignment control method enables a considerable reduction of alignment time.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.30-38
• /
• 2014

The purpose of this study is to build and manage environment models with line segments from sonar range data on obstacles in unknown and varied environments. The proposed method therefore employs a two-stage data-transform process in order to extract environmental line segments from range data on obstacles. In the first stage, the occupancy grid extracted from the range data is accumulated to form a two-dimensional local histogram grid. In the second stage, a line histogram extracted from a local histogram grid is based on a Hough transform, and matching serves as a means of comparing each of the segments on a global line segments map against the line segments to detect the degree of similarity in the overlap, orientation, and arrangement. Each of these tests is formulated by comparing one of the parameters in the segment representation. After the tests, new line segments can be found at maximum-density cells in the line histogram, and they are composed onto the global line segment map. The proposed technique is demonstrated in experiments in an indoor environment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.289-294
• /
• 2008

A 77 GHz 3-stage low noise amplifier (LNA) employing one common source and two cascode stages is developed using $0.13{\mu}m$ CMOS process. To compensate for the low gain which is caused by lossy silicon substrate and parasitic element of CMOS transistor, positive feedback technique using parasitic inductance of bypass capacitor is adopted to cascode stages. The developed LNA shows gain of 7.2 dB, Sl1 of -16.5 dB and S22 of -19.8 dB at 77 GHz. The return loss bandwidth of LNA is 71.6 to 80.9 GHz (12%). The die size is as small as $0.7mm\times0.8mm$ by using bias line as inter-stage matching networks. This LNA shows possibility of 77 GHz automotive RADAR system using $0.13{\mu}m$ CMOS process, which has advantage in cost compared to sub-100 nm CMOS process.

• 한국항행학회논문지
• /
• 제8권2호
• /
• pp.176-183
• /
• 2004

본 논문에서는 s-밴드에서 동작하는 2단 저잡음 증폭기를 설계 및 제작하였다. 소자는 HP사의 ATF54143 HEMT를 사용하였고, 양호한 잡음지수를 위한 정합회로 설계 시 좋지 않은 입력 정재파비를 동시에 고려하여, 원하는 잡음지수와 입력 정재파비를 얻도록 설계하였다. 측정 결과 이득은 27.8dB, 입력 정재파비와 출력 정재파비는 1.5를 넘지 않는 특성을 얻었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.311-317
• /
• 2015

The aim of this study is to develop a 3D registration algorithm for positron emission tomography/computed tomography (PET/CT) and magnetic resonance (MR) images acquired from independent PET/CT and MR imaging systems. Combined PET/CT images provide anatomic and functional information, and MR images have high resolution for soft tissue. With the registration technique, the strengths of each modality image can be combined to achieve higher performance in diagnosis and radiotherapy planning. The proposed method consists of two stages: normalized mutual information (NMI)-based global matching and independent component analysis (ICA)-based refinement. In global matching, the field of view of the CT and MR images are adjusted to the same size in the preprocessing step. Then, the target image is geometrically transformed, and the similarities between the two images are measured with NMI. The optimization step updates the transformation parameters to efficiently find the best matched parameter set. In the refinement stage, ICA planes from the windowed image slices are extracted and the similarity between the images is measured to determine the transformation parameters of the control points. B-spline. based freeform deformation is performed for the geometric transformation. The results show good agreement between PET/CT and MR images.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.98-101
• /
• 2007

A fully integrated 5-GHz CMOS power amplifier for IEEE 802.11a WLAN applications is implemented using $0.18-{\mu}m$ CMOS technology. An on-chip transmission-line transformer is used for output matching network and voltage combining. Input balun, inter-stage matching components, output transmission line transformer and RF chokes are fully integrated in the designed amplifier so that no external components are required. The power amplifier occupies a total area of $1.7mm{\times}1.2mm$. At a 3.3-V supply voltage, the amplifier exhibits a 22.6-dBm output 1-dB compression point, 23.8-dBm saturated output power, 25-dB power gain. The measured power added efficiency (PAE) is 20.1 % at max. peak, 18.8% at P1dB. When 54 Mbps/64 QAM OFDM signal is applied, the PA delivers 12dBm of average power at the EVM of -25dB.

• Journal of Yeungnam Medical Science
• /
• 제34권2호
• /
• pp.216-221
• /
• 2017

Background: This study was conducted to investigate preoperative carcinoembryonic antigen (CEA) as a prognostic factor in colorectal cancer. Methods: Between January 2000 and July 2011, 1298 patients with primary adenocarcinoma colorectal cancer without metastasis, who underwent curative resection were retrospectively identified. The patients were divided into two groups according to serum CEA level at primary diagnosis: a high CEA (HCEA) group (serum CEA ${\geq}6ng/mL$) and a normal CEA (NCEA) group (serum CEA <6 ng/mL). A 1:1 propensity score matching analysis was applied to reduce bias. Finally, 364 patients were enrolled in this study. Matched variables were age, gender, preoperative chemoradiotherapy, tumor site, cell differentiation and pathologic stage. Results: The clinicopathological characteristics of the two groups did not differ significantly difference. The systemic metastasis rate was 16.5% (30/182) and 25.3% (46/182) in the NCEA and HCEA groups, respectively (p=0.039). There were no significant differences in local recurrence or metastatic sites between groups. The 5-year disease-free survival (DFS) rate of the HCEA group was worse than that of the NCEA group; however, there was no significant difference in overall survival between the two groups. Conclusion: Elevated preoperative CEA was related to frequent systemic recurrence and low DFS. Therefore, elevated preoperative CEA could be considered a prognostic factor for worse clinical outcomes in patients with colorectal cancer.

• 스마트미디어저널
• /
• 제4권4호
• /
• pp.9-17
• /
• 2015

최근 지능형 범죄가 늘면서 첨단 보안 기술에 대한 요구가 점차 늘어나고 있다. 현재까지 보고된 위, 변장 영상 검출방법은 실용화를 위하여 정확도 개선이 요구된다. 본 논문에서는 사람의 얼굴에 대하여 동공의 반사도를 이용하여 위조 영상을 판별하고 아다부스트를 이용하여 만든 얼굴 부분별 검출기를 사용한 얼굴 변장 영상을 판별한다. 제안된 시스템은 다중 스케일 가버 특징 벡터를 기반으로 눈의 위치를 찾은 후 템플릿 매칭을 통해서 정확히 찾아진 눈 위치의 동공을 조사하여 최대값과 최소값을 구하여 위조 여부를 판별하고 부분별 검출기를 사용하여 눈과 코의 검출 여부를 판단하여 각각 선글라스와 마스크의 착용 여부를 판단하고 선글라스&마스크 검출기를 사용하여 얼굴이 검출되지 않았을 경우를 대비하였다. 실험을 통하여 본 논문에서 제안한 방법이 더욱 신뢰성 높은 위, 변장판별시스템임을 확인하였다.