• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.81-86
• /
• 2023

Recently, demand for embedded systems requiring low power and high specifications has been increasing, and RISC-V processors are being widely applied. RISC-V, a RISC-based open instruction set architecture (ISA), has been developed and researched by UC Berkeley and other researchers since 2010. RV32I ISA is sufficient to support integer operations such as addition and subtraction instructions, but M-extension should be defined for multiplication and division instructions. This paper proposes an RV32I, RV32IM processor, and indicates benchmark performance scores compared to an existing processor. Additionally, A non-stalling method was proposed to support a 2-stage pipelined DSP multiplier to the 5-stage pipelined RV32IM processor. Proposed RV32I and RV32IM processors satisfied a maximum operating frequency of 50 MHz on Artix-7 FPGA. The performance of the proposed processors was verified using benchmark programs from Dhrystone and Coremark. As a result, the Coremark benchmark results of the proposed processor showed that it outperformed the existing RV32IM processor by 23.91%.

• Tuberculosis and Respiratory Diseases
• /
• 제47권3호
• /
• pp.339-346
• /
• 1999

배경: 비소세포폐암에서 비슷한 병기의 환자들도 생존 가망성은 상당한 차이를 보이는데 이러한 상황에서 보다 환자에게 효율적인 치료를 제공할 수 있게 도울 수 있는 새로운 예측인자의 필요성이 대두되었는데 보다 정확하고 재현성이 있는 폐암 병기 판정이 환자의 치료와 예후에 가장 큰 영향을 보인다고 생각된다. 비소세포폐암의 병기 판정은 1986년 Mountain 이 표명한 T(primary tumor), N(regional lymph nodes), M(distant metastasis) 시스템과 이에 각각의 병기를 따르고 있는데 이후 같은 병기내에서도 서로 다른 예후를 보이고 보다 세분화된 병기의 구분점이 있어야겠다는 공론속에서 1996년 American Joint Committee on Cancer과 Union Internationale Contre le Cancer에 의해 새로 개정된 비소세포 폐암의 병기 판정 시스템이 천명되었다. 본 연구에서는 비소세포폐암 환자에서 새로운 병기판정에 따른 생존율을 알아보고 이에 따라 술전, 술후 환자의 예후에 대한 의의를 알아 보기 위해 이 연구를 진행하였다. 방법: 연구 방법은 1981년부터 1995년까지 한양대학교 부속병원에서 비소세포폐암으로 진단된 환자중 술전에 방사선 또는 항암화학요법 치료를 받은 적이 없는 환자로서 치료적 목적으로 광범위 폐절제 및 림프절제술을 받은 환자중 사망여부의 추적이 가능한 총 84예의 환자를 대상으로 술후 얻어진 조직학적 병기를 과거의 병기판정과 새로운 TNM 병기를 기준으로 이의 생존의 관찰치와 더불어 병리조직학적 특정과 임상적 특징을 알아보았다. 결과: 환자의 median survival은 과거의 병기에 따른 결과는 stage I ; 79.1개월, stage II ; 47.3 개월, stage IIIa;22.77개월, stage IIIb; 16.1개월, stage IV;15.2개월이었고 새로운 병기에 따른 결과는 stage Ia;58.5개월, stage IIb;76.0개월, stage IIa;적용불능, stage IIIb;43.0개월, stage IIIa;22.5개월, stage IIIb;16.1개월, stage IV;15.2개월이었고 술후 36개월 뒤의 누적 백분율 생존율은 stage Ia;100%, stage Ib;80%, stage IIa; 적용불능, stage IIb;26%, stage IIIa;21%을 보였고 과거의 병기와 새로운 병기 판정에 따른 생존율에 따른 차이는 보이지 않았다. 결론: 폐암은 전세계적으로 암으로 인한 사망률 원인의 1위를 보이는 암종으로 비소세포폐암에서 비슷한 병기의 환자들도 생존 가망성은 상당한 차이를 보이는데 이러한 상황에서 보다 정확한 생존 가망성을 예측하고 각각의 환자에게 보다 효율적인 치료를 제공할 수 있게 도울 수 있는 새로운 예측 측도가 필요하게 되었다. 본 연구에서 결과는 통계학적으로 확연한 차이를 보이지 않았지만 새로 개정된 폐암 병기 판정 체계는 폐암 환자의 생존율을 높이고 비소세포폐암 환자의 예후를 보다 세분하여 정확하게 판정하는데 도움이 될 수 있으리라 사료되며 앞으로 보다 많은 추가적인 연구가 필요하다고 본다.

• 한국의류산업학회지
• /
• 제6권1호
• /
• pp.41-50
• /
• 2004

This research proposes the on-stage costumes for the play Hamlet of Shakespeare performed by Yunheedan Guhri Pae - the Street Theater Troupe. Stage costumes have an important role in displaying the characteristics of each characters to the audience and has big visual effects. However, in order to design the costumes in the object viewpoints of the audience, the survey on the images of the characters who had actually watched the performance was taken place and proposed the costume design according to the results of the survey. Hamlet a: This result was applied to propose a sweater in black color, black leather pants and vest. Hamlet b: This result was applied to propose hooded coat in purple in middle level of brightness and color spectrum and yellow coat. For free image, loose pants in blue and vest in the same color tone were proposed. Gertrude a: This result was applied to use purple (violet) with reddish tone to propose the formation of a dress applying tailored suit. Gertrude b: This result was applied to propose purple gown and the one-piece dress with black laces. Ophelia a: This result was applied to propose feminine white dress and cape in purple color tone. Ophelia b: This result was applied to propose dyed and weaved clothes. Through the surveys as above, the images of each character was driven in adjectives, and using the results driven from the brightness, coloration, and color, color images were proposed. Only one costume cannot make up for the stage costumes and because it exists as an element of stage production, it is true that costumes are limited in some areas. However, that limit can become the motive of the costume. There is a limit, which the designer cannot produce the costumes as he or she had designed but I believe it is the center of the on-stage customers to display the characteristics of the characters according to the given concept. The limit of this research is the fact that because the costumes were designed so they fit the conditions already given, thus it was difficult to regard the process of designing and producing the costume as a project done according to the interaction. And in the future, if it is possible, I wish for the joint research with the people responsible for stage art to take place as a practical stage art. It was possible to produce practical costume since they were produced for actual performance and the production of costumes considering the dance steps, line of flow, and acting, was able to reduce the trial and error on stage. Through this research, I felt that the understanding and smooth interaction on diverse other areas not limited to the costume design should be taken place and believe that this was a research that proposes new research method since there had been only a few previous research regarding the on-stage costumes for actual performances. Therefore, this research had depended on the surveys given to the audiences to endow objectivity, however, I wish this research can contribute to defining effective process and methods for the on-stage costumes with more active researches with diverse methods and in diverse areas. I am sorry that the costume production for all the characters and all the scenes in Hamlet couldn't be done due to many limitations. As the following research assignment, I am planning on designing the costumes for all the scenes.

• Journal of Chest Surgery
• /
• 제29권4호
• /
• pp.427-432
• /
• 1996

1985년 부터 1994년까지 18명의 흉선종 환자를 수술치료 하였다. 15명의 환자는 중증근무력증이 없었으며 3명의 환자는 중증근무력증을 호소하였다. Masaoka' 분류에 의한 임상적 병기는 I기 5 명(27.8%), ll기 6명(33.3%), 111기 6명(33.3%), IV기 1명(5.6%)이였다. 18명의 흉선종 환자중 10명 (I기 환자 5명, ll기 환자 5명)은 외과적 치료만을 시행하였으며, 8명(ll기환자 1명, 111기 환자 6명, IV 기 환자 1명)은 외과적 절제와 수술 전후 방사선 치료 및 항암치료를 시행하였다. 수술 사망은 없었 으며,평균3.4년의 추적 관찰 기간동안 3명의 환자가 사망하였다. 전체 환자의 5년 생존율은 82.2$\pm$9%였으며, 임상적 병기에 따른 5년 생존율은 I기와 II기 100%, III기 62.5 %였으며 IV기 에서는 생 존 환자가 없었다 수술시야상에서 비 침습성으로 판단된 II기 흉선종 환자 1명 에서 흥막과 종격동에 흉선종이 재발된 경우가 있었다. 흉선종의 재발로 2명의 환자에서 수술후 14개월과 52개월째에 재수술을 시행 하였다. 흉선종의 예후와 연관이 있는 인자는 Masaoka')분류에 따른 임상적 병기와 흉선종의 완전절제여 투였다. 중증근무력증은 생존율의 위험 인자 \ulcorner아니었다.

• Radiation Oncology Journal
• /
• 제12권3호
• /
• pp.323-329
• /
• 1994

Purpose: In supraglottic cancer, radiation therapy is used to preserve the laryngeal function but combined surgery and radiation therapy is required in advanced stage. The authors Present the results of radiation therapy alone and combined surgery Plus Postoperative radiation therapy for supraglottic cancer. Methods and Materials: A retrospective analysis was done for 43 patients with squamous cell carcinoma of the supraglottic larynx who were treated from Feburary 1982 to December 1991, in the Department of Radiation Oncology, Korea University Hospital. Patient distribution according to the AJCC staging system was as follows: I, 3($7.0\%$); II, 7($16.3\%$); III, 17($39.5\%$); IV, 16($37.2\%$). Patients' age ranged from 30 to 72 years(median 62). Follow up durations were from 21 to 137 months(median 27). Seventeen patients($39.5\%$) were treated by radiation therapy alone with radiation doses of 6840-7380 cGy and 26 patients($60.5\%$) were treated with surgery plus postoperative irradiation with doses of 5820-6660 cGy. Results: Overall five-year survival rate for all stage was $51.8\%$, with $100\%$ for Stage I and II, $47.3\%$ for Stage III, and $29.2\%$ for Stage III. The difference of the survival rate by stage was statistically significant(p=0.0152). Five-year survival rates were $100\%$ for locally confined tumor in the supraglottic larynx, $37.5\%$ for transglottic extension, $26.7\%$ for hypopharynx extension, and only two of 5 patients with both transglottic and hypopharynx extension were alive(p=0.0033). Five-year survival rates by neck node status were as follows: $55.0\%$ for NO, $64.3\%$ for N1, $50.0\%$ for N2, and all 2 of N3 were died of disease. Overall survival rate for radiation therapy alone group was $42.8\%$, and it was $56.7\%$ for surgery plus postoperative radiation therapy group with no statistically significant difference(p=0.5215). In Stage I and II, all Patients survived. In Stage III and IV, 5-year survival rate for radiation therapy alone group was $28.5\%$ and $43.4\%$ for surgery plus postoperative irradiation group(p=0.5103). Local control rate was $58.8\%$(10/17) for radiation therapy alone group and $73.1\%$ (19/26) for surgery plus postoperative irradiation group. Three patients from surgery plus postoperative radiation therapy group developed distant metastasis in lungs. Conclusion: Treatment results of radiation therapy alone was excellent in early stage supraglottic cancer. In advanced stage, even the difference was statistically not significant, the result of postoperative radiation therapy group was superior compared with radiation therapy alone group. Since 1992, concomitant chemoradiotherapy with hyperfractionated radiotherapy is being used to improve the result of the treatment and preserve the laryngeal function in advanced stage supraglottic cancer.

• 항공우주기술
• /
• 제7권1호
• /
• pp.142-150
• /
• 2008

KSLV-I 발사체에 탑재되는 원격측정시스템, 추적시스템, 비행종단시템, GPS, 관성항법유도시스템의 개별적인 성능과 고홍우주센터 및 제주추적 소에 설치된 지상장비와의 연계성능을 확인하기 위하여 항공기를 이용한 비행시험이 요구된다. 시험에 적용할 탑재장비의 선정, 하니스, 운용방법, 안테나 부착방법 등의 면밀한 계획과 분석을 통해 시험의 효율성이 향상되기 때문에 KSLV-I의 통신환경과 비행프로파일 둥이 비행시험에 최대한 정확하게 고려되어야 한다. 본 논문에서는 KSLV-I 전자탑재장비의 목록과 규격, 비행시험용 랙과 하니스, 항공기 제원, 비행궤적 둥 효과적인 비행시험을 위해 준비 및 분석되어야 하는 전반적인 사항이 제시된다.

• 전자공학회논문지SC
• /
• 제44권1호
• /
• pp.85-93
• /
• 2007

본 논문에서는 다수의 병렬 입.출력 환경을 위한 높은 노이즈 마진을 갖고 있는 LVDS I/O 회로를 소개한다. 제안된 LVDS I/O회로는 송신단과 수신단으로 구성되어 있으며 송신단 회로는 차동위상 분할기와 공통모드 피드백(common mode feedback)을 가지고 있는 출력단으로 이루어져 있다. 차동위상 분할기는 SSO(simultaneous switching output) 노이즈에 의해 공급전압이 변하더라도 안정된 듀티 싸이클(duty cycle)과 $180^{\circ}$의 위상차를 가진 두 개의 신호를 생성한다. 공통모드 피로백을 가지고 있는 출력단 회로는 공급전압의 변화에 상관없이 일정한 출력전류를 생성하고 공통모드 전압(common mode voltage)을 ${\pm}$0.1V 이내로 유지한다. LVDS 수신단 회로는 VCDA(very wide common mode input range differential amplifier)구조를 사용하여 넓은 공통 입력전압 범위를 확보하고 SSO 노이즈에 의한 공급 전압의 변화에도 안정된 듀티 싸이클(50% ${\pm}$ 3%)을 유지하여 정확한 데이터 복원이 가능하다. 본 논문에서 제안한 LVDS I/O 회로는 0.18um TSMC 라이브러리를 기본으로 하여 설계 되었으며 H-SPICE를 이용하여 시뮬레이션 하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.57-64
• /
• 2001

In recent years, the concern of designing multi-stage gear drives ha increased with more application of them in high-speed and high-load. Until now, however, the researches on the design of gear drives have been focused on single gear pairs. Thus the design practice for multi-stage gear drives has been depended on experiences and expertise of designers and carried out commonly by trial and error. We propose an automation algorithm for the design of two-and three-strage cylindrical gear drives. The two types of dimensional design processes have been proposed to determine gear dimensions in a formal way. The first design process(Process I) uses to total volume of gears to determine gear ration , and uses K factor , unit load and aspect ration to determine gear dimensions, The second one(Process II) makes use of Niemann's formula and center distance to calculate gear ratio and gear dimensions. Process I and Process II employ material date from AGMA and ISO standards, respectively. The configuration design determines the positions of gears with minimizing the volume of gearbox by using a simulated annealing algorithm. The availability of the design algorithm is validated by the design examples to two-and three=stage gear drives.

• 한국식생활문화학회지
• /
• 제19권6호
• /
• pp.598-604
• /
• 2004

This was aim to study the changes of components by different parts and maturity of tomato. We found that orally fed tomatine which induced a significant reduction in cholesterol in hamster in contrast to potato glycoalkaloids, the safety of tomatine was supported by our observation that pickled green tomatoes consumed widely in many countries has a high tomatine content. The tomatoes harvested during the first stage(10 days after flowering) contained tomatine $6333.49{\mu}g\;per\;100g$ and dohydrotomatine and ${\alpha}$-tomatine in a ratio of about 1:13.8. The tomatine content then decreased by about 85% during stage 2(20 days after flowering) an dehydrotomatine contene dropped to a value near zero during stage 3, 4 It on the tomatine content dropped to a value near zero during the final stage(50 days after flowering). With respect to health benefits at all stages of maturity, unripe tomato contain chlorophyll and ${\alpha}$-tomatine should consumed.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.202-209
• /
• 2000

In recent years the concern of designing multi-stage gear drives increases with the more application of gear drives in high-speed and high-load. until now however research on the gear drive design has been focused on single gear pairs and the design has been depended on experiences and know-how of designers and carried out commonly by trial and error. We propose the automation of the dimensional design of gears and the configuration design for gear arrangement of two-and three-stage cylindrical gear drives. The dimensional design is divided into two types of design processes to determine the dimensions of gears. The first design process(Process I) uses the total volume of gears to determine gear ratio and uses K factor unit load and aspect ratio to determine gear dimensions. The second one(Process II) makes use of Niemann's formula and center distance to calculate gear ratio and dimensions. Process I and II employ material data from AGMA and ISO standards respectively. The configuration design determines the positions of gears to minimize the volume of gearbox by simulated annealing algorithm. Finally the availability of the design algorithm is validated by the design examples of two-and three-stage gear drives.