• 제목/요약/키워드: Stack emission management system

검색결과 10건 처리시간 0.019초

산업 환경에서의 집진기에 대한 RF모니터링 시스템 구현 (Implementation of RF Monitoring System for the Dust Collector in Industrial Environments)

  • 이성엽;이광희;고봉진
    • 한국항행학회논문지
    • /
    • 제18권5호
    • /
    • pp.513-517
    • /
    • 2014
  • 본 논문에서는 대기환경의 악화 방지와 개선을 위하여 현재 수동으로 관리되고 있는 집진기 관리시스템을 대신하여 무선을 이용하여 집진기를 관리하는 RF 모니터링 시스템을 설계하고 구현하였다. 제안한 시스템은 산업현장 내 다수의 집진기에 대한 가동시간, 전력량, 차압값 등을 무선으로 모니터링 하여 관리자의 PC에 표시하고 저장할 뿐만 아니라 장애 발생 시 이를 관리자의 휴대폰으로 알려 줌으로서 고부가가치의 집진기 모니터링 시스템의 구현이 가능하다. 따라서 본 논문에서 구현한 RF 모니터링 시스템을 통하여 대기배출원관리시스템(SEMS)에 각 집진기의 정보를 기록함에 있어서 불필요한 손실을 줄일 수 있다.

고정오염원에서의 중금속 배출특성 연구 (Characteristics of Heavy Metal Emissions from Stationary Sources)

  • 박정민;이상보;차준석;권오상;이상학
    • 한국대기환경학회지
    • /
    • 제24권5호
    • /
    • pp.574-583
    • /
    • 2008
  • The results of HAPs emission data using TRI (Toxic Release Inventory), SODAM (Source Data Management system) were investigated and the emissions of 7 heavy metals from their sources and emission processes were also analyzed. Questionnaire for source data analysis as well as the stack sampling were carried out for 17 factories among 6 selected industrial types. The annual amount of emissions was estimated based on the measured concentration and flow rates. All sources were operated with high efficiency control devices and the concentration levels of all heavy metals were shown to be below 0.1 to of regulation standard. The highest emission source of heavy metals was steel manufacturing industry with the annual emission of 342.9 kg/yr and followed by hazardous waste incinerator, paint manufacturing, nonferrous metal manufacturing, rolling & press goods manufacturing and storage battery manufacturing. In the case of Hg, the emissions were quite significant from electric acros of steel manufacturing industry, although the concentration level was below the emission standard, showing the necessity of specific care for its management.

카본블랙 제조공정의 안전성 향상에 관한 연구 (A Study on the Safety Improvement of Carbon Black Manufacturing Process)

  • 주종율;정필훈;이성은
    • 대한안전경영과학회지
    • /
    • 제25권4호
    • /
    • pp.153-161
    • /
    • 2023
  • Carbon black is a material in the form of fine black powder obtained by incomplete combustion or pyrolysis of hydrocarbons, and is composed of 90-99% carbon, and the rest is composed of hydrogen and oxygen. In the event of an emergency during the manufacture of carbon black, the generated tail gas should be safely discharged through an emergency line to prevent fire, explosion, and environmental pollution accidents caused by the tail gas. If the pressure continues to rise, the pressure control valve shall operate and the rupture plate shall be ruptured sequentially and the tail gas shall be discharged to the vent stack through the emergency line. As an emergency emission system, even if some untreated substances in the tail gas are released into the atmosphere, they are lighter than air, so it is safe to discharge them to a safe place through the Vent Stack. If the gas pressure is rising or worse, it is discharged from the Vent Stackine, and discharging fuel.

울산 지역에서 2001년 이후 이산화황(SO2)의 고농도 사례 분석과 저감 정책 방안의 검토 (Case Analysis on High Concentration of SO2 and Review on Its Reduction Policy in the Ulsan Metropolitan Area since 2001)

  • 문윤섭
    • 한국환경과학회지
    • /
    • 제17권4호
    • /
    • pp.423-437
    • /
    • 2008
  • Until comparatively lately, the annual time series of the $SO_2$ concentration had been shown in a decreasing trend in Ulsan as well as other Korean cities. However, the high concentration of $SO_2$ was frequently found in the specific countermeasure region including the national industrial complex such as Mipo and Onsan in the Ulsan city for the period of $2001{\sim}2004$. There are many conditions that can influence the high concentration of $SO_2$ at monitoring sites in Ulsan, such as: First, annual usage of the fuel including sulfur increased in comparison with the year before in spite of the fuel conversion policy which wants to use low sulfur oil less than 3% and LNG. Second, point source, such as the power plants and the petroleum and chemistry stacks, was the biggest contributor in $SO_2$ emission, as a analyzed result of both the air quality modeling and the stack tole-monitoring system (TMS) data. And third, the air pollutants that occurred in processes of homing and manufacturing of the fuel including sulfur were transported slow into a special monitoring site by accumulating along the frontal area of see-breeze. It was concluded that Ulsan's current environmental policy together with control methods should be changed into the regulation on total amount of emission, including a market-based emission trading with calculating of atmospheric environmental critical loads, for the $SO_2$ reduction like the specific countermeasure for the $O_3$ and PM10 reduction in the Seoul metropolitan area. And this change should be started in the big point sources of $1{\sim}3$ species because they are big contributors of Ulsan's $SO_2$ pollution. Especially it is necessary to revitalize of the self-regulation environmental management. Other control methods for sustaining the $SO_2$ reduction are as follows: maintenance of the fuel conversion policy, reinforcement of the regional stationary source emission standard, and enlargement of the stack TMS.

선박 전원용 고체산화물형 연료전지(SOFC) 시스템 성능에 관한 연구 (A Study on Performance of Solid Oxide Fuel Cell System for Ship Applications)

  • 박상균;노길태;김만응
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권5호
    • /
    • pp.582-589
    • /
    • 2011
  • 선박에서 배출되는 온실가스를 저감하기 위한 기술로 연료전지 기술이 고려되어지고 있다. 본 연구에서는 메탄을 연료로 사용한 내부개질형 500kW급 고체산화물형 연료전지의 선박 적용을 가정한 연료전지 시스템을 모델링하여 시스템의 구성에 따른 공기, 메탄, 물의 공급 유량 및 시스템 운전 압력이 연료전지 스택의 입구 및 출구에서의 가스 온도, 스택 출력 및 시스템 효율 등에 미치는 영향에 관하여 검토하였다. 그 결과 공기와 메탄의 공급 유량이 연료전지 스택 입구 및 출구 가스 온도에 직접적인 영향을 주었다. 공기와 물의 공급 유량이 증가하면 스택 출력 및 시스템 효율이 증가하고, 메탄의 경우 스택 출력은 증가하나 시스템 효율은 낮아진다.

물질수지 방법을 고려한 액화천연가스 발전소에서의 온실기체 배출량 산정 방법 비교 (Comparison of the CO2 Emission Estimation Methods in a LNG Power Plant Based on the Mass Balance Approach)

  • 김희진;여민주;김용표;장건우;신원근;이명훈;최형욱
    • 한국기후변화학회지
    • /
    • 제4권3호
    • /
    • pp.235-244
    • /
    • 2013
  • 이산화탄소 배출량 산정법은 IPCC 지침에 따라 4가지 산정등급(Tier)으로 구분된다. 본 연구에서는 LNG를 연료로 사용하는 기체 화력발전소에서의 2011년 3월부터 5월까지의 이산화탄소 배출량을 Tier 3과 4의 방법에 따라 산정하여 그 결과를 물질 수지식에 따른 이론적 배출량과 비교하였다. Tier 3과 이론적 배출량의 결과는 유사하게 나타난 반면, Tier 4의 경우 이론적 배출량에 비해 최대 17% 가량 높게 산정되는 것으로 나타났다. 비교 결과는 연속 측정 장비에서의 결측, 비정상, 무효 자료 대체로 인한 오차 가능성을 제시한다. 하지만 정상적인 자료만을 사용하여 상대적인 결과 차이를 볼 경우에도 차이는 다소 경감하나 여전히 존재한다. 이러한 차이는 Tier 4에 해당하는 연속측정 기기 자체, 특히, 유량측정기의 오류 및 정확도에 의한 것으로 보인다.

가정용 연료전지 시스템의 열관리 해석을 위한 시스템 운전 모델 개발 (A System Simulation Model of Proton Exchange Membrane Fuel Cell for Residential Power Generation for Thermal Management Study)

  • 유상석;이영덕;안국영
    • 대한기계학회논문집B
    • /
    • 제34권1호
    • /
    • pp.19-26
    • /
    • 2010
  • 이온교환막 연료전지는 전세계적인 에너지 고갈 문제와 온실효과에 대한 대응책의 하나이다. 특히, 이온교환막 연료전지는 전기화학반응에 의해 전기를 생산함과 동시에 열을 발생하기 때문에 가정용으로 적용하기에 적당하다. 가정용 연료전지의 열관리 목적은 연료전지가 최적조건에서 운전할 수 있도록 적절히 온도를 제어해 주는 것으로, 본 연구에서는 부하 변화 시 가정용 연료전지 시스템의 응답 특성과 열관리 특성을 알아보기 위한 해석 모델을 개발하였다. 열관리 해석 모델은 연료전지의 온도를 조절하기 위한 펌프와 열교환기로 구성된 1차측, 주택에 온수를 공급하기 위한 탱크와 펌프 계통의 2차 측으로 구성되었다. 부하를 순차적으로 증가시킬 때와 감소시킬 때를 구분하여 열관리 계통의 응답특성 을 확인하였다. 결과적으로 탱크의 초기 승온에 많은 시간이 소요되기 때문에 부하를 다단으로 오랜 시 간 동안 서서히 증가시키면서 시스템 응답 특성을 확인하였다. 또한, 본 연구에서는 가정용 연료전지의 부하 변화시의 열관리 특성을 고려한 운전 전략에 대해서도 조사하였다.

우리 나라의 환경정책 방향 (Environmental Health Strategies in Korea)

  • 조병극
    • 환경위생공학
    • /
    • 제7권2호
    • /
    • pp.1-10
    • /
    • 1992
  • Since 1960's along with industrialization and urbanization, economic growth has been . achieved, however, at the same time, environmental condition has been seriously deteriorated. . Currently, volume of wastewater has been increasing at annual rate of 7% in sewage and 20% in industrial wastewater. However, the nation's sewage treatment serves only 33% of the municipal wastewater as of 1991. Major portion of air pollutants comes from combustion of oil and coal which comprise 81% of total energy use and emission gases from motor vehicles increasing at an accelerated rate. It is known that Korea generates the highest amount of waste per capta. Nevertheless, it is not sufficient to reduce the volume of waste by means of resources recovery and recycling. Recognizing the importance of global environmental problems such as ozone layer depletion, global warming and acid rain, international society has been making various efforts since the 1972 Stockholm conference. In particular, it is expected that the Rio conference which has adopted the Rio declaration and Agenda 21 will form a crucial turning point of the emerging new world order after the Cold War confrontation. To cope with such issues as domestic pollution and global environmental problems, the fundamental national policy aims at harmonizing "environmental protection and sustainable development". The Ministry of Environment has recently set up a mid-term comprehensive plan which includes annual targets for environmental protection. According to the government plan, gradual improvement of various environmental conditions and specific measures to achieve them is planned in time frame. Additional sewage treatment plants will be constructed in urban areas with the target to treat 65% of the nation's municipal sewage by 1996. Supply of clean fuels such as LNG will also be expanded starting from large cities as a cleaner substitute energy for coal and oil. In parallel with expansion of LNG, emphasis will be placed on installation of stack monitoring system. Due to the relatively limited land, government's basic policy for solid waste treatment is to develop large scale landfill facilities rather than small sized ones. Thirty three regional areas have been designated for the purpose of waste management. For each of these regions, big scale landfill site is going to be developed. To increase the rate of waste recycling the government is planning to reinforce separate collection system and to provide industries with economic incentives. As a part of meeting the changing situation on global environmental problems after UNCED, and accommodation regulatory measures stipulated in the global environmental conventions and protocols, national policy will try to alter industrial and economic structure so as to mitigate the increasing trends of energy consumption, by encouraging energy conservation and efficiency. In this regard, more attention will be given to the policy on the development of the cleaner technology. Ultimately, these policies and programs will contribute greatly to improving the current state of national public health.

  • PDF

방사성의약품 합성에서 발생하는 방사성기체의 효율적 차단 (An Effective Block of Radioactive Gases for the Storage During the Synthesis of Radiopharmaceutical)

  • 지용기;김동일;김시활;원문희;최성욱;최춘기;석재동
    • 핵의학기술
    • /
    • 제16권2호
    • /
    • pp.126-130
    • /
    • 2012
  • 방사성의약품 제조 시 휘발성 기체의 경우에 완전 차폐가 되지 않고, Hot cell 외부로 그리고 배기덕트를 통해 작업자에게 외부피폭은 물론 호흡을 통해 내부피폭을 가져오게 한다. 처음에는 Hot cell 자체의 배출구를 막아서 방사성기체를 차단하려하였으나 장치에 맞는 기체 밀폐형 댐퍼의 제작이 어렵고, 크기가 맞지 않아서 설치 후에 여전히 문제점이 개선되지 않았다. 그러나 Tedlar gas sampling bag의 사용으로 합성 장치의 가스 배출구를 연결하여 방사성 기체를 저장하고 10반감기가 지난 후에 배출함으로써 작업자의 피폭을 확연히 줄이게 되었으며 $^{18}F$ 방사성 기체는 Hot cell 배출구에 활성탄 필터를 연결하고 최종 배출구에 2차 활성탄 필터를 사용함으로써 배출되는 방사능 농도를 90% 이상 줄여주었다. 단 반감기의 핵종인 경우는 위와 같은 경우를 이용하여 다음날 작업을 할 수 있지만 반감기가 긴 핵종들 같은 경우는 다음날 처리 할 수 없는 문제점들이 발생한다. Decay tank의 추가적인 문제점들을 보완하거나 기체상의 여러 방사성 입자들을 포집 할 수 있는 물질들이 만들어져야 할 것이다. 현재 우리나라는 최종 배출 공기 중 방사능 농도만을 규제하고 있으나 유럽 같은 경우 일일 배출 양과 연간 배출도 규제를 하고 있다. 방사성의약품 합성 시 발생하는 많은 방사성 물질들을 보다 효과적으로 친환경적으로 처리할 수 있는 여러 연구들이 이루어져야 할 것이다.

  • PDF