• 제목/요약/키워드: Stack Efficiency

검색결과 263건 처리시간 0.026초

주기 및 비주기 태스크의 효율적인 관리를 위한 실시간 센서 노드 플랫폼의 설계 (Design of a Real-time Sensor Node Platform for Efficient Management of Periodic and Aperiodic Tasks)

  • 김병훈;정경훈;탁성우
    • 정보처리학회논문지C
    • /
    • 제14C권4호
    • /
    • pp.371-382
    • /
    • 2007
  • 본 논문에서는 주기 및 비주기 태스크의 효율적인 관리를 제공하는 실시간 센서 노드 플랫폼을 설계하고 구현하였다. 기존 센서 노드의 소프트웨어 플랫폼은 제한된 센서 노드의 자원을 효율적으로 사용하기 위하여 메모리 및 전력 소비량의 최소화에만 초점을 두었기 때문에 태스크의 실시간성과 빠른 평균 응답시간을 보장하는 실시간 센서 노드의 소프트웨어 플랫폼에는 적합하지 않다. 이에 본 논문에서는 센서 노드의 소프트웨어 플랫폼으로 많이 사용되고 있는 TinyOS 기반에서 태스크의 실시간성과 빠른 평균 응답시간을 보장할 수 있는 기법과 한계를 분석하였으며, 모든 주기 태스크가 마감시한 내에 실행이 완료되는 것을 보장하고 비주기 태스크의 응답시간을 최소화하는 실시간 센서 노드 플랫폼을 제안하였다. 본 논문에서 제안한 플랫폼은 Atmel사의 초경량 8비트 마이크로프로세서인 Atmega128L이 탑재된 센서 보드에서 구현되었다. 구현된 실시간 센서 플랫폼의 성능을 분석한 결과, 모든 주기 태스크의 마감시한 보장을 제공함과 동시에 향상된 비주기 태스크의 평균 응답시간과 낮은 시스템의 평균 처리기 이용률을 확인할 수 있었다.

이동 컴퓨팅 환경에서 실시간 데이터의 적응적 손실 복구 방법 (An Adaptive Packet Loss Recovery Scheme for Realtime Data in Mobile Computing Environment)

  • 오연주;백낙훈;박광로;정해원;임경식
    • 한국정보과학회논문지:정보통신
    • /
    • 제28권3호
    • /
    • pp.389-405
    • /
    • 2001
  • 최근 인터넷 뿐만 아니라 이동 컴퓨팅 환경에서도 멀티미디어 정보와 같은 실시간 데이터의 이용이 증가함에 따라 실시간 데이터의 효육적이고 안정적인 전송 방법들이 요구되고 있다. 현재 실시간 데이터를 전송하기 위해서는 RTP가 사용되는데 이 프로토콜은 주로 UDP의 상위계층에서 동작하도록 설계되었기 때문에 안정된 전송을 보장받지 못하며 따라서 패킷 손실을 피할 수 없다. [1,2]. 특히 제한된 무선 대역폭을 이용하는 이동 컴퓨팅 환경에서는 기존의 인터넷보다도 더 많은 패킷들이 손실될수 있다. 본 논문에서는 유선 및 무선망 환경에서의 실시간 데이터 전송시 발생되는 패킷 손실특성을 길버트 모델에 기초하여 확률적으로 분석하고 이를 기반으로 새로운 복구 방법을 제안한다. 제안하는 실시간 데이터의 복구 방법에서는 수신자 측에서 분석한 패킷의 손실률에 따라 송신자 측이 패킷에 부가하는 잉여 데이터의 양을 가변적으로 조절함으로써 사용중인 네트워크의 패팃 손실 특성을 반영할 수 있다. 특히 잉여 데이터들의 오프셋 값들을 비연속적으로 설정함으로써 간헐적인 패킷 손실과 연속적인 패킷 손실 모두에 대처할 수 있는 특징이 있다. 이러한 특징은 기존의 네트워크에 비해 패킷의 손실률이 높고 급격한 트래픽 변이를 가지는 이동 컴퓨팅 환경에 잘적용될수 있다. 또한 본 논문에서 제안하는 방법은 확률 이론에 근거하기 때문에 기존의 인터넷과 같은 유선망 환경에서도 비슷한 손실 특성을 가지는 경우에 적용가능하다. 제안된 방법은 Mobile IP 및 RTP/RTCP를 이용하여 구현되었드며 실시간 데이터의 전송에 효율적임을 실험적으로 보였다.

  • PDF

전기화학적 기법에 의한 미생물연료전지 내부저항 특성 파악 및 전력관리시스템 연계 전압 변화와 유기물 저감에 미치는 영향 (Identification of Internal Resistance of Microbial Fuel Cell by Electrochemical Technique and Its Effect on Voltage Change and Organic Matter Reduction Associated with Power Management System)

  • 장재경;박혜민;김태영;양윤석;여정진;강석원;백이;권진경
    • 대한의용생체공학회:의공학회지
    • /
    • 제39권5호
    • /
    • pp.220-228
    • /
    • 2018
  • The internal resistance of microbial fuel cell (MFC) using stainless steel skein for oxidizing electrode was investigated and the factors affecting the voltage generation were identified. We also investigated the effect of power management system (PMS) on the usability for MFC and the removal efficiency of organic pollutants. The performance of a stack microbial fuel cell connected with (PMS) or PMS+LED was analyzed by the voltage generation and organic matter reduction. The maximum power density of the unit cells was found to be $5.82W/m^3$ at $200{\Omega}$. The maximum current density was $47.53A/m^3$ without power overshoot even under $1{\Omega}$. The ohmic resistance ($R_s$) and the charge transfer resistance ($R_{ct}$) of the oxidation electrode using stainless steel skein electrode, were $0.56{\Omega}$ and $0.02{\Omega}$, respectively. However, the sum of internal resistance for reduction electrode using graphite felts loaded Pt/C catalyst was $6.64{\Omega}$. Also, in order to understand the internal resistance, the current interruption method was used by changing the external resistance as $50{\Omega}$, $300{\Omega}$, $5k{\Omega}$. It has been shown that the ohm resistance ($R_s$) decreased with the external resistance. In the case of a series-connected microbial fuel cell, the reversal phenomenon occurred even though two cells having the similar performance. However, the output of the PMS constantly remained for 20 hours even when voltage reversal occurred. Also the removal ability of organic pollutants (SCOD) was not reduced. As a result of this study, it was found that buffering effect for a certain period of time when the voltage reversal occurred during the operation of the microbial fuel cell did not have a serious effect on the energy loss or the operation of the microbial fuel cell.

광대역 지능 무선 ATM 망에서 위치 탐색을 위한 이동성 구현 (Implementation of the mobility for Location Searching in Broadband Intelligence Wireless ATM Networks)

  • 정운석;박광채
    • 한국정보통신학회논문지
    • /
    • 제7권3호
    • /
    • pp.461-467
    • /
    • 2003
  • 본 논문은 표준 광대역 시그널링 능력을 확장 적용한 지능 무선 ATM망에서 위치 탐색을 위한 이동성 구현 방법을 제안하고, 수학적 알고리즘을 기반으로 성능을 분석하였다 현재의 B-ISDN UNI 프로토콜 스택은 단말기 이동성을 지원하지 않는 고정 PTP 또는 PTM 인터페이스를 통한 단일 프로토콜을 사용하기 때문에 무선 ATM 망에서 이동 단말기의 위치를 결정하기 위해 위치탐색 메카니즘이 요구된다. 제안된 방법은 고정망에 기반을 둔 ATM과 B-ISDN 시그널링 통합의 확장으로 지능망 기술을 사용하여 시스템의 성능을 저하시키지 않고, 시그널링 부하를 최소화하여 무선 엑세스 부분에 동적인 이동성을 가능하게 하였다. 성능 분석은 수학적 알고리즘에 근거하여 MFC 모델링에 의해 구현되고, 지능 무선 ATM 시스템에서 위치 탐색 서비스의 상대적인 이득들을 측정하기 위해 비교에 의한 시그널링 성능 평가를 수행하여 비용의 효율성을 실현하였다. 얻어진 결과는 무선 ATM 액세스 시스템을 지원하기 위해 현재의 B-ISDN /ATM NNI 시그널링 기준을 변경할 필요 없이 공중 B-ISDN 망 환경에서도 작용할 유연성을 가지며, 미래의 광대역 PCS에서 단말기의 이동성과 다양한 멀티미디어 서비스에 대응하기 위해 쉽게 확장할 수 있다.

기간기반 복합 이벤트 패턴 검출 (Detection of Complex Event Patterns over Interval-based Events)

  • 강만모;박상무;김상락;김강현;이동형
    • 한국인터넷방송통신학회논문지
    • /
    • 제12권4호
    • /
    • pp.201-209
    • /
    • 2012
  • 시점기반 복합 이벤트 처리는 각 이벤트에 하나의 타임스탬프를 사용하여 즉각적인 이벤트를 처리한다. 하지만, 시점기반의 이벤트 처리로는 이벤트의 활동 기간이 중요한 역할을 하는 금융, 멀티미디어, 의학, 기상학 같은 분야에서 복합적인 시제 관계를 표현하기에는 불충분하다. 실세계의 애플리케이션 분야에서, 이벤트는 기간을 가지며, 두 종류 이상의 이벤트는 시간적으로 겹쳐질 수도 있고, 하나의 이벤트가 다른 이벤트를 포함할 수도 있다. 이런 종류의 이벤트들에 대한 관계는 시점기반 이벤트처럼 연속적이지 않을 수도 있다. 본 논문에서는 기간기반 이벤트를 사용하여 복합 이벤트의 패턴을 검출하는 방법을 설계하고 구현한다. 기간기반 이벤트는 시점기반 이벤트가 다룰 수 없는 이벤트들 사이의 겹침과 포함관계를 표현할 수 있다. 기간기반 이벤트 연산자는 시작 끝점과 종료 끝점을 사용하여 이벤트의 기간을 나타내고, 기간기반 이벤트의 시퀀스를 표현하여 복합 이벤트 패턴을 검출할 수 있다. 본 논문에서는 복합 이벤트 패턴 검출의 효율성을 높이기 위해 활성 인스턴스 스택을 사용하는 알고리즘을 제시하며, 이벤트의 시퀀스를 구성할 때 중간 결과의 개수를 줄이기 위해 윈도우 푸시다운 기법을 적용하여 수행시간과 메모리의 효율을 높인다.

우리 나라의 환경정책 방향 (Environmental Health Strategies in Korea)

  • 조병극
    • 환경위생공학
    • /
    • 제7권2호
    • /
    • pp.1-10
    • /
    • 1992
  • Since 1960's along with industrialization and urbanization, economic growth has been . achieved, however, at the same time, environmental condition has been seriously deteriorated. . Currently, volume of wastewater has been increasing at annual rate of 7% in sewage and 20% in industrial wastewater. However, the nation's sewage treatment serves only 33% of the municipal wastewater as of 1991. Major portion of air pollutants comes from combustion of oil and coal which comprise 81% of total energy use and emission gases from motor vehicles increasing at an accelerated rate. It is known that Korea generates the highest amount of waste per capta. Nevertheless, it is not sufficient to reduce the volume of waste by means of resources recovery and recycling. Recognizing the importance of global environmental problems such as ozone layer depletion, global warming and acid rain, international society has been making various efforts since the 1972 Stockholm conference. In particular, it is expected that the Rio conference which has adopted the Rio declaration and Agenda 21 will form a crucial turning point of the emerging new world order after the Cold War confrontation. To cope with such issues as domestic pollution and global environmental problems, the fundamental national policy aims at harmonizing "environmental protection and sustainable development". The Ministry of Environment has recently set up a mid-term comprehensive plan which includes annual targets for environmental protection. According to the government plan, gradual improvement of various environmental conditions and specific measures to achieve them is planned in time frame. Additional sewage treatment plants will be constructed in urban areas with the target to treat 65% of the nation's municipal sewage by 1996. Supply of clean fuels such as LNG will also be expanded starting from large cities as a cleaner substitute energy for coal and oil. In parallel with expansion of LNG, emphasis will be placed on installation of stack monitoring system. Due to the relatively limited land, government's basic policy for solid waste treatment is to develop large scale landfill facilities rather than small sized ones. Thirty three regional areas have been designated for the purpose of waste management. For each of these regions, big scale landfill site is going to be developed. To increase the rate of waste recycling the government is planning to reinforce separate collection system and to provide industries with economic incentives. As a part of meeting the changing situation on global environmental problems after UNCED, and accommodation regulatory measures stipulated in the global environmental conventions and protocols, national policy will try to alter industrial and economic structure so as to mitigate the increasing trends of energy consumption, by encouraging energy conservation and efficiency. In this regard, more attention will be given to the policy on the development of the cleaner technology. Ultimately, these policies and programs will contribute greatly to improving the current state of national public health.

  • PDF

Aspen $Dynamics^{TM}$와 ACM을 이용한 용융탄산염 연료전지 시스템의 모사 및 제어 (Simulation and Control of the Molten Carbonate System using Aspen $Dynamics^{TM}$ and ACM)

  • 전경연;곽하연;경지현;이태원;문길호;이기풍;류아림;양대륙
    • Korean Chemical Engineering Research
    • /
    • 제49권4호
    • /
    • pp.423-431
    • /
    • 2011
  • 최근 대체에너지에 대한 관심이 높아짐에 따라 수소에너지를 기반으로 하는 차세대 발전 장치인 연료전지 관련 기술 개발이 활발하게 이루어지고 있다. 특히, 고온 연료전지의 대표적인 형태인 용융 탄산염 연료전지(MCFC: Molten Carbonate Fuel Cell, 이하 MCFC)는 전력사업용으로의 높은 가능성을 인정받아 화석연료를 대체할 발전방식으로 평가 받고 있다. 본 연구에서는 Aspen Custom Modeler($ACM^{TM}$)에서 평형반응식을 이용하여 스택 모델을 구성한 후, Aspen $Plus^{TM}$에서 BOP(Balance of Plant) 시스템과 스택을 연결하여 전체 MCFC 발전 시스템의 정상상태를 모사하였다. 모델의 유효성을 입증하기 위해서 전류밀도, 연료이용률, S/C ratio, 재순환 흐름 비와 같은 주요 조업변수에 따른 셀 전압, 전력, 효율 등 시스템의 성능을 분석하였다. 그리고 Aspen $Dynamics^{TM}$에서 PID제어 방식을 적용하여 제어루프를 구성하였고 부하변화, 설정점 변화, 재순환 흐름비 변화에 따른 각각의 사례연구를 통하여 전체 시스템의 성능변화를 예측하였다. 그 결과 연료이용률과 전류밀도의 변화에 따른 전체 시스템의 최대 발전 효율 및 출력전압을 위한 운전조건을 제안하였다.

라돈변환을 이용한 2차원 필터링 (Two-Dimensional Filtering Through the Radon Transform)

  • 원중선
    • 대한원격탐사학회지
    • /
    • 제14권1호
    • /
    • pp.17-36
    • /
    • 1998
  • 라돈변환은 디지털 토모그라피. 원격탐사 영상의 선구조 분석, 탄성파탐사 자료의 경사중첩 등 다양한 분야에서의 디지털 영상자료 처리에 폭넓게 이용되어 왔다. 그러나 라돈변환의 2차원 콘볼류션이나 상관관계 계산은 푸리에변환과 비교해 볼 때 그 효용성에 대해서는 거의 논의되지 못하였다. 본 논문에서는 2차원 콘볼류션이나 상관관계 계산은 라돈공간에서 ρ에 대한 1차원 콘볼류션이나 상관관계로 타원이 낮아진다는 것을 유도하였다. 이를 이용하면 영상공간에서의 2차원 필터링을 라돈공간에서의 단순한 1타원 필터링으로 효과적으로 수행할 수 있다. 본 논문에서는 FIR 필터를 이용한 라돈공간에 서의 1차원 필터링을 RADARSAT SAR 영상에서 선적에 의한 구조를 증강시키데 적용하였다. 적용결과 라돈변환을 이용한 2타원 필터링은 스펙클 잡음을 줄일 뿐만 아니라 효과적으로 선적에 의한 구조를 증강시키는 것으로 나타났다. 비록 라돈변환을 이용하는 2차원 필터링은 푸리에변환을 이용하는 방법에 비하여 효율성과 효과도가 떨어져 단순한 필터링 목적으로는 적합치 못하나, 토모그라피나 SAR 영상을 이용하여 선구조 분석을 실시하는 경우와 같이 라돈변환이 필수적으로 적용되는 경우 라돈공간에서의 2차원 필터링을 부수적으로 적용하면 효과적으로 활용될 수 있다.

무모르타르로 건식조립된 콘크리트블록 벽체의 성능평가 연구 (A study for the performance evaluation of concrete block assembly wall without using mortar)

  • 이중원
    • 한국산학기술학회논문지
    • /
    • 제20권7호
    • /
    • pp.203-210
    • /
    • 2019
  • 최근 한반도에 발생하는 지진으로 인해 조적조 건물에 대한 피해가 많이 발생하고 있어 이에 대한 성능평가 연구가 활발히 진행되고 있다. 또한 조적조 건축은 일반적으로 습식공사로 수행되어 온도에 영향을 받기 때문에 시공의 효율성이 떨어지는 단점이 있다. 본 연구에서는 모르타르를 사용하지 않고 콘크리트블록을 조립하여 벽체를 완성하는 건식조적공법을 제안해 보고 이를 실험과 해석연구를 통해 그 성능을 평가하고자 한다. 콘크리트블록 벽체의 성능을 평가하기 위해 건식조립벽체의 프리즘 압축강도, 직접 전단강도, 대각선 인장강도 실험을 수행하였고, ABAQUS FEM 해석을 통해 단면형상의 적정성을 검토하였다. 연구수행결과 모르타르를 사용하지 않고 콘크리트블록을 조립하는 건식 콘크리트블록 벽체의 압축강도와 대각선 인장강도가 일정 강도 이상을 발휘할 수 있음을 알 수 있었고, 특히 키블록의 H형 모듈이 전체 콘크리트블록의 전단키 역할을 하여 건식 콘크리트블록으로 전단강도 성능이 우수함을 알 수 있었다. 또한 주블록의 형상과 두께가 각각의 강도성능에 주된 영향을 주고 있어 최적형상과 제안된 건식공법의 현장시공성이나 내진성능에 대한 연구를 통해 현장에서 습식공법을 대체할 수 있는 공법으로 적용할 수 있을 것이다.

이종접합 태양전지에서의 Bi-Layer 구조를 통한 향상된 개방전압특성에 대한 고찰 (A Study on Improved Open-Circuit Voltage Characteristics Through Bi-Layer Structure in Heterojunction Solar Cells)

  • 김홍래;정성진;조재웅;김성헌;한승용;수레쉬 쿠마르 듄겔;이준신
    • 한국전기전자재료학회논문지
    • /
    • 제35권6호
    • /
    • pp.603-609
    • /
    • 2022
  • Passivation quality is mainly governed by epitaxial growth of crystalline silicon wafer surface. Void-rich intrinsic a-Si:H interfacial layer could offer higher resistivity of the c-Si surface and hence a better device efficiency as well. To reduce the resistivity of the contact area, a modification of void-rich intrinsic layer of a-Si:H towards more ordered state with a higher density is adopted by adapting its thickness and reducing its series resistance significantly, but it slightly decreases passivation quality. Higher resistance is not dominated by asymmetric effects like different band offsets for electrons or holes. In this study, multilayer of intrinsic a-Si:H layers were used. The first one with a void-rich was a-Si:H(I1) and the next one a-SiOx:H(I2) were used, where a-SiOx:H(I2) had relatively larger band gap of ~2.07 eV than that of a-Si:H (I1). Using a-SiOx:H as I2 layer was expected to increase transparency, which could lead to an easy carrier transport. Also, higher implied voltage than the conventional structure was expected. This means that the a-SiOx:H could be a promising material for a high-quality passivation of c-Si. In addition, the i-a-SiOx:H microstructure can help the carrier transportation through tunneling and thermal emission.