• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1345-1348
• /
• 2013

We investigated the tribochemical and wear properties of Polytetrafluoroethylene (PTFE) based polymer matrix composites with nanoceramic (NC) ${\beta}$-sialon, and $Al_2O_3$ particles for the mechanical seal applications at low temperature. SEM showed that NC particles were homogeneously distributed in the polymer matrix and initiated the formation of the supramolecular spherulites around NC. From the temperature stimulated depolarization (TSD) current results, it was analyzed that the surface charge on nanoceramic affected the formation of the spherulites structure. 2 wt % $Al_2O_3$ NC did not degrade the mechanical properties of PTFE so that composites showed the similar values of tensile strength, elongation at the rupture and friction coefficient as those of neat PTFE. However, the composite with 2 wt % $Al_2O_3$ NC revealed the improved wear resistance, wear rate of 0.4-1.2 mg/h at room temperature and 0.28 mg/h at $-40^{\circ}C$, respectively, while the neat PTFE the 70-75 mg/h at room temperature and 70.3 mg/h at $-40^{\circ}C$.

• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.102-106
• /
• 2003

Crystallization behaviour of blends of different MFI isotactic polypropylenes (PP), and blends of PP with carbon nanofibre have been investigated by DSC and polarizing optical microscope. Both higher MFI PP component and the carbon nanofibre in the blend influence the nucleation activity of the melt during non-isothermal crystallization. In presence of carbon nanofibre, the sherulitic growth rate is highly disturbed. The calculation of nucleation activity indicates that carbon nanofibres act as active substrate for heterogeneous nucleation.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1584-1586
• /
• 1999

The polypropylene has been known to have higher melting temperature than Polyethylene. and good mechanical properties. This paper introduces the experiment result for tree properties of polypropylene thin film with a crystal structure. According to the experiment. tree properties is appeared boundary section of thin film first of all. Also, Spherulites magnitude of slow cooling is larger than that of rapid cooling.

• Korean Journal of Veterinary Research
• /
• v.50 no.4
• /
• pp.259-264
• /
• 2010

Melamine is an organic base and a trimer of cyanamide which contains 66% nitrogen by mass, but it was sometimes illegally added to food products in order to enhance the apparent protein content for the bigger profit. Many Chinese infants and pet animals fed melamine-containing formulas suffered acute kidney failure with renal crystal formation. Fish feeds were also recently found to be contaminated with melamine. This experiment has been designed to determine whether renal crystals can be experimentally induced in crucian carp (Carassius carassius) fed melamine and cyanuric acid (each at 400 mg/kg/day for 3 days) in combination, and to compare experimentally induced crystals with those from pet animals with triazine related renal failure. The results showed that all fish developed gold brown renal crystals arranged in radial spherulites in the renal tubules, similar to those detected in the pet animals.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.127-134
• /
• 2002

Microporous polypropylene hollow fiber membrane was fabricated from isotactic polypropylene-soybean oil system by melt spinning process. Addition of nucleating agent accelerated the crystallization rate and elevated the crystallization temperature. Nucleating agent increased the number of nuclei and spherulites, which offered more inter-spherulitic amorphous sites for stretching. Benzoic acid, adipic acid, and dibenzylidene sorbitol were selected as nucleating agents, and their characteristics and effects were investigated by thermal and optical analyses. Spherulite growth and micropore formation characteristics were correlated with the kind of nucleating agent. Benzoic acid and adipic acid showed the remarkable nucleating effect, while dibenzylidene sorbitol was less effective than those. Nucleating agents also helped the sample have uniform microporous structure. Increase of nucleating agent composition enhanced the nucleation effect to some extent. Nucleating agents played very important roles in enhancing the membrane porosity and water flux.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1428-1431
• /
• 1998

The polypropylene has been known to have higher melting temperature than polyethylene, and good mechanical properties. This paper introduces the experement result of dielectric breakdown properties to a polypropylene with a crystal structure. According to the experement, breakdown voltage is incresed when a thickness of thin film thinned. Spherulites of PP film prepared by annealing is larger than that of PE.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.256-259
• /
• 1996

In this paper, We studied polyethylene thin film to evaluate the effects of crystal structure on breakdown properties and the dielectric strength on the condition of impurity free. Bielectric strength of the finn obtained with self healing method that is able to test repeatedly on the same sample is about 3.58 MV/cm at 0.73 $\mu\textrm{m}$. The film shows outstanding crystal domain an\ulcorner crystal structure. The size of spherulites obtained reach 150-200 $\mu\textrm{m}$ in diameter.

• Macromolecular Research
• /
• v.10 no.1
• /
• pp.44-48
• /
• 2002

The supermolecular structures of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalate) (PEN), and their blend were investigated with optical microscopy and small angle light scattering. With increasing the crystallization temperature, incomplete spherulitic texture was developed for the PET samples. At a high crystallization temperature of 220 $^{\circ}C$, the light scattering pattern represented a random collection of uncorrelated lamellae. The general morphological appearances for the PEN samples were similar to that of the PET. A notable feature was that the spherulites of the PEN formed at 200 $^{\circ}C$ showed regular concentric bands arising from a regular twist in the radiating lamellae. The spherulitic morphology of the PET/PEN blend was largely influenced by the changes of the sequence distribution in polymer chains determined by the level of transesterifcation. The increased sequential irregularity in the polymer chains via transesterification caused a morphological transition from a regular folded crystallite to a tilted lamellar crystallite.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.833-839
• /
• 2001

The crystallization characteristics of metallocene linear low density polyethylene was investigated by small angle light scattering and comparison was made with Ziegler-Natta linear low density polyethylene. The special efforts were made to find out the effects of branching number, length of branching and co-monomer content of m-LLDPE on the crystallization behavior of m-LLDPE. It was found that m-LLDPE has longer induction time to start crystallization from the amorphous state than that of conventional LLDPE with similar branching number, but the rate of crystallization seems not change much in both LLDPEs. Lowering of branching number in m-LLDPE resulted in both increasing of rate of crystallization and reducing induction time to crystallize. In general, the maximum size of spherulites of m-LLDPE is bigger than that of conventional LLDPE.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1387-1393
• /
• 1996

A study on mesophase pitch as a matrix precursor of carbon fiber reinforced carbon (C/C) composite has been recently presented. This study is concerned with the production of mesophase pitch as matrix precursors for C/C composite from coal tar pitch. A commercial coal tar pitch was heat-treated at 25$0^{\circ}C$ for 2 hours to remove low molecular weight fraction from the pitch then increasing the temperature of the pitch to between 350~45$0^{\circ}C$ to produce mesophase pitch. The pitch was continuously stirred during this time and nitrogen gas was continuously bubbled through the pitch. Spherical and bulk mesophases were formed in the pitch after heat-treatment,. Parent and mesophae pitches were characterized by elemental analysis coke yield solubi-lity in tetrahydrofuran and hexane and an optical microscopy to measure the mesiophase content. It was neces-sary to produce C/C composite that a mesophase pitch with about 30-40 vol% mesophase spherulites can be infiltrated into a fiber preform without a filter effect as a matrix precursor conditions. This condition was satisfied with mesophase pitch heat treated at 40$0^{\circ}C$ for 2 hours. The other heat treatment conditions showed the nuclei of mesophase or bulk mesophae which were not satisfied with the matix precursor condition.