• 터널과지하공간
• /
• 제21권3호
• /
• pp.181-191
• /
• 2011

단층대, 파쇄대 또는 풍화대가 발달한 암반은 실내시험을 위한 시료 성형이 어렵다. 기존에 현장에서 수행된 직접전단시험은 갱도 내벽의 수직반력을 이용하여 수행되었다. 이 연구에서 개발된 현장직접전단시험기는 터널내부 또는 노천의 현장상태 암반에서 시험을 수행할 수 있다. 현장직접전단시험기의 주요 구성은 전단하중 반력판 및 하중전달판, 유압실린더 시스템, 로드셀, 다단계 전단상자, 전단상자 고정장치, 수직하중 반력판 및 하중전달판, 마찰저항 감소용 롤러 등이다. 공시체는 각주형의 블록으로 최대 크기는 $400{\times}400{\times}460$ mm이며 현장에서 형성하는 방법 및 절차가 제시되었다. 개발된 시험기의 현장적용성 평가를 위하여 연구지역에 대한 지질공학적 조사 분석 연구를 통하여 성능시험을 위한 공시체 형성에 적합한 위치가 선정되었다. 현장적용 결과 개발된 현장용 시험기는 암석의 강도 및 변형과 관련하여 필요한 대부분의 정보를 제공할 수 있는 성능을 확보하였음을 확인하였다.

• 비파괴검사학회지
• /
• 제26권1호
• /
• pp.7-11
• /
• 2006

기계부품의 세라믹 코팅 층은 사용 중 그 표면특성이 변하므로 잔류수명 예측과 신뢰성 확보를 위해 비파괴적으로 세라믹 코팅 층의 특성을 평가하는 것은 매우 중요하다. 이를 위해 본 인구는 AISI 1045 강과 오스테나이트 스테인리스 304 강 모재위에 매우 얇은 TiN 세라믹 층을 코팅한 시편에 내하여 누설 레일리(Rayleigh) 표면파를 이용한 TiN 코팅부재의 특성평가를 시도하였다. 후방복사 측정기법으로 코팅 층 내의 표면파의 전파특성이 평가되었고 표면 거칠기, 코팅 층 두께, 마모조긴 둥이 다양한 시편들에 대해 후방복사 프로파일이 측정되었다. 후방복사 프로파일의 정점각과 크기는 시편의 조건들에 따라 민감하게 변하였고, 정점각의 증가는 코팅 층 접합 강도의 저하로 설명되었다. 결과들은 후방복사 기법을 이용한 표면파의 분산성 평가가 코팅 층의 특성 평가에 매우 유용함을 보여주었다.

• ALGAE
• /
• 제21권4호
• /
• pp.479-483
• /
• 2006

In preparation of the biological samples for electron microscopy, the chemical fixation by glutaraldehyde, paraformaldehyde, and OsO4 has been generally used for a long time. However, the chemical fixation method has some problems: the infiltration time is a little bit long and the ultrastructure of cell or tissue transforms before complete fixation of sample. So, recently, cryo-fixation is considered more often in biomedical field. In this study, we compared High Pressure Freezing (HPF) method with chemical fixation method using a algal sample (Ptilota filicina J. Agardh), which was difficult to fix using chemical fixation method. In chloroplast, the ultrastructure of thylakoid lamella and phycobilisome can not show clearly by chemical fixation. In this study we could observe the ultrastructure of thylakoid lamella and phycobilisome of chloroplast very clearly using HPF fixation. An improved images of ultrastructures of nucleus, mitochondrion and floridean starch could obtain. These results suggest that HPF method is very useful method in algal specimen for electron microscopy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권5호
• /
• pp.375-379
• /
• 2011

Introduction: This study examined the effect of autogenous tooth bone used as a graft material for bone regeneration in an artificial bony defect of minipigs. Materials and Methods: Four healthy minipigs, weighing approximately 35-40 kg, were used. Four standardized artificial two-walled bony defects, 5 mm in length and depth, were made on the bilateral partial edentulous alveolar ridge on the mandible of minipigs, and autogenous tooth bone was augmented in the right side as the experimental group. On the other hand, only alloplastic bone graft material HA was grafted with the same size and manner in the left side as the control group. All minipigs were sacrificed at 4 weeks after a bone graft and evaluated histologically by Haematoxylin-eosin staining. The specimens were also evaluated semi-quantitatively via a histomorphometric study. The percentage of new bone over the total area was evaluated using digital software for an area calculation. Results: All specimens were available but one in the left side (control group) and two in the right side (experimental group) were missing during specimen preparation. The amount of bone formation and remodeling were higher in all experimental groups than the control. The mean percentage area for new bone in the experimental and control groups was $43.74{\pm}11.96%$ and $30.79{\pm}2.93%$, respectively. Conclusion: Autogenous tooth bone is a good alternative to autogenous bone with the possible clinical feasibility of an autogenous tooth bone graft in the reconstruction of bony defects.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권3호
• /
• pp.120-126
• /
• 2013

Objectives: This study sought to elucidate the effect of autogenous tooth bone material by experimenting on minipig's maxillary sinus and performing histological and histomorphometric analyses. Materials and Methods: Five 18-24 month-old male minipigs were selected, and right maxillary sinuses were grafted with bone graft material made of their respective autogenous teeth extracted eight weeks earlier. The left sides were grafted with synthetic hydroxyapatite as control groups. All minipigs were sacrificed at 12 weeks after bone graft, which was known to be 1 sigma (${\sigma}$) period for pigs. Specimens were evaluated histologically under a light microscope after haematoxylin-eosin staining followed by semi-quantitative study via histomorphometric analysis. The ratio of new bone to total area was evaluated using digital software for calculation of area. Results: All specimens were available, except one on the right side (experimental group), which was missing during specimen preparation. This study demonstrated new bone at the periphery of the existing bone in both groups, showing evidence of bone remodeling, however, encroachment of new bone on the central part of the graft at the 1 ${\sigma}$ period was observed only in the autogenous tooth bone group (experimental group). Histomorphometric analysis showed more new bone formation in the experimental group compared to the control group. Although the difference was not statistically significant (P>0.05), the mean percentage area for new bone for the experimental and control groups were $57.19%{\pm}11.16%$ and $34.07%{\pm}13.09%$, respectively. Conclusion: The novel bone graft material using autogenous tooth is a good alternative to autogenous bone, comparable to autogenous bone, and outperforming synthetic hydroxyapatite bone graft materials in terms of bone regeneration capacity. Augmentation with autogenous tooth bone materials will reduce donor site morbidity without hampering the safety of the autogenous bone graft.

• 한국미생물·생명공학회지
• /
• 제5권3호
• /
• pp.133-140
• /
• 1977

Nocardia sp의 세포내 징세포구조 및 tellurite 환원초소의 존재부위와 T. T. C. 환원부위를 전자현미경으로 관찰한 것을 요약하면 다음과 같다. 광포내 미세구조에 있어서 unit membrane을 가진 농양구조가 복잡한 형태를 하고 계포질에 내포되어있고 어떤 것은 막구조가 둥글게 감겨있는 형태도 있다. 금속, tellurate염외 석출이 세포질중에 나타나므로 tellurite 및 tellurate 환원효소는 세축질중에 존재한다는 것을 알 수 있다. 그리고T.T.C.의 환원은 세포막 및 세포내막양구조 부분에서 일어난다. 따라서 tellurate환원과 T.T.C.환원은 서로 상이한 부위에서 일어남을 알 수 있다. 구체내에 형성된 T.T.C. tellurate은 도정제인 osmic acid에 의하여 제기화되며, 더우기 탈수제로 사용하고 있는 ethanol에 녹고 아울러 포매각에도 녹기 때문에 약 95％의 formazane이 균체외로 용출되어 나오므로 검정시의 세포내에는 거의 formazane이 존재하지 않기 때문에 전자현미경상의 전자투과성인 부분은 원래 formazane이 형성되었던 부분인 것이다.

• 약학회지
• /
• 제11권1_2호
• /
• pp.7-16
• /
• 1967

A yellowish microneedles, $C_{28}$ H$_{32}$ $O_{14}$ ${\cdot}$ I$_{1}$/$_2$, H$_{2}$O, m.p.262-$4^{\circ}$ , [${\alpha}$$_{D}^{20}$= -71,$43^{\circ}$(C = 0.42, pyridine), its acetate m.p.123-5.deg., were obtained in 0.3% yield from the leaves of Chrysanthemum sibiricum F$_{ISCHER}$. This substance is insoluble in water and the usual organic solvents except pyridine and ethylene glycol and, is not decomposed by dilute mineral acids but undergoes decomposition on being boiled in 60% H$_{2}$SO$_{4}$ or 35% HCl, giving one moel each of acacetin, glucose and rhamnose. It was not hydrolysed with a rhamnodiastase preparation obtained from the seeds of Rhamnus koraiensis. After permethylation of it, the uncrystallized product was hydrolysed and apigenin-5,4'-dimethyl ehter, m.p.$262^{\circ}$ was obtained, indicating that the disaccharide residue is at the 7 position of acacetin. Partial hydrolysis of this acacetin-7-rhamnoglucoside in cyclohexanol with formic acid gave acacetin-7-glucoside, m.p.246.deg. and rutinose, identifying them with authentic specimen on a paper chromatography. It was thus identified as linarin(acacetin-7-rutinoside) by means of mixed fusion, of paper partition chromatography and of its derivatives. Zemplen and Bognar suggested that the glucosidic linkage of linarin is .betha. by means of synthesis of this substance. But there is no evidence whether it is hydrolysed by emulsin or maltase or not. Linarin itself was not hydrolysed by an emulsin existing in the seed of Apricot or a maltase, but acacetin-7-glucoside(tilianin) which obtained from linarin gave acacetin and glucose on hydrolysis with the same emulsin and accordingly the glucosidic linkages of linarin and tilianin are thus regarded as ${\beta}$.

• 한국광물학회지
• /
• 제25권2호
• /
• pp.95-104
• /
• 2012

자연 석면 산출지의 투각섬석-양기석에 대한 전자현미경관찰 결과, 섬유상, 침상, 주상의 다양한 입자 형태가 관찰되었다. 섬유상 입자들은 일정한 너비로 가늘고 길게 휘어지며, 로프 모양의 다발이나 매트를 형성한다. 침상 입자들은 평행한 다발을 형성하나 장축 방향으로 쉽게 갈라지며 탄성이 있다. 주상 입자는 분쇄과정에서 벽개를 따라 쪼개지며 종횡비가 짧은 침상입자를 형성한다. 입자의 형태적 특성은 산출지별로 다르며 하나의 시편 내에서도 차이가 관찰된다. 투각섬석-양기석 계열의 각섬석은 섬유상에서 주상까지 형태적 연속체를 형성하므로 석면상 각섬석에 대한 유해성 평가를 위해서는 형태적 특성과 발암 특성 간의 인과관계에 근거한 동정 기준 및 시료준비과정이 수립되어야 한다.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.151-157
• /
• 2018

In this study, the compound $Li_3BO_3$ (LBO) is intended to be prepared by a polymeric complex method as a sintering aid for the densification of $Li_7La_3Zr_2O_{12}$ (LLZ) solid electrolyte. A polymeric precursor containing Li and B is heat-treated in an air atmosphere at a temperature range between $600^{\circ}C$ and $800^{\circ}C$. Instead of LBO, the compound $Li_{2+x}C_{1-x}B_xO_3$ (LCBO) is unexpectedly synthesized after a heat-treatment of $700^{\circ}C$. The effect of LCBO addition on sintering behavior and ion conductivity of LLZ is studied. It is found that the LCBO compound could lead to significant improvements in the densification and ionic conductivity of LLZ compared to pure LLZ. After sintering at $1100^{\circ}C$, the density of the LLZ-12wt%LBO composite is $3.72g/cm^3$, with a high Li-ion conductivity of $1.18{\times}10^{-4}Scm^{-1}$ at $28^{\circ}C$, while the pure LLZ specimen had a densify of $2.98g/cm^3$ and Li-ion conductivity of $5.98{\times}10^{-6}Scm^{-1}$.

• 대한소아치과학회지
• /
• 제25권2호
• /
• pp.259-267
• /
• 1998

For more than two decades, many investigators have tried a variety of methods for delivering antimicrobial agents to the oral cavity with the objective of eliminating mutans streptococci. In the belief that the effectiveness of chemotherapy might be improved by a more effective delivery system, the intention of the present study was to exploit a new drug delivery system delivering chlorhexidine to the oral cavity. The vehicle delivering chlorhexidine tested in this study was self-curing acrylic resin(polymethyl methacrylate). The powder of the acrylic resin was polymerized with the 5 different liquid preparations, in which $Chlorzoin^{(R)}$ was mixed with five different monomer/Chlorzoin ratios immediately prior to the polymerization, in a stainless steel mold ($40mm{\times}40mm{\times}2mm$). A total of 50 cured resin specimens were divided into 5 groups according to the different monomer preparations. Every specimen was soaked in an airtight container filled with distilled water (100 ml) and then kept in an incubator at $37^{\circ}C$. The solutions (0.8 ml) were collected from the container at every 24 hours, and the amount of released chlorhexidine in the solutions was measured in an ultraviolet spectrophotometer at 250nm. The container was refilled with distilled water every after measurement. This procedure was repeated for 14 days. It was found that chlorhexidine was continuously released from all of the 50 specimens during the experimental period. And it was noted that the pattern of chlorhexidine release was a type of sustained-release preparation, that is, the amount of the released chlorhexidine at the first day in all 5 groups was high (p<0.0001), and then the release was decreased during the rest of the experimental period (p<0.001).