• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.271-272
• /
• 2008

We fabricated a pentacene thin-film transistor with Ni/Ag source/drain electrodes. Also, we obtained similar electrical characteristics as compared with source/drain electrode with Au. This device was found to have a field-effect mobility of about 0.021 $cm^2$/Vs, a threshold voltage of -5, -7 V, an subthreshold slope of 2.0, 4.5 V/decade, and an on!off current ratio of $3.6\times10^5$, $2.0\times10^6$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1494-1495
• /
• 2009

Thin Film Transistor(TFT) having CIS (CuInSe) semiconductor layer was fabricated and characterized. Heavily doped Si was used as a common gate electrode and PECVD Silicon nitride ($SiN_x$) was used as a gate dielectric material for the TFT. Source and drain electrodes were deposited on the $SiN_x$ layer and CIS layer was formed by a direct patterning method between source and drain electrodes. Nanoparticle of CIS material was used as the ink of the direct patterning method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1600-1603
• /
• 2009

In this work, we have fabricated inverted staggered ZnO TFTs with 1-${\mu}m$ resolution channel length by micro contact printing (${\mu}$-CP) method. Patterning of micro scale source/drain electrodes without etching is successfully achieved by micro contact printing method by using silver ink and polydimethylsiloxane (PDMS) stamp. And the time dependent characteristics of the sheet resistance show that Ag inklayer could be used as source and drain electrodes for ZnO TFTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1361-1363
• /
• 2005

In this paper, we report on the performance stability of solution processible OTFT devices with Au/Ti and ITO source-drain (S/D) electrodes. It appears that the contact resistance of the S/D electrode strongly affects the stability of OTFT devices. Interestingly, the devices with the Au/Ti electrode showed lower mobility than those with the ITO (S/D) devices. The field effect mobilities of the devices with the Au/Ti and ITO electrodes were 0.06, and $0.44cm^2/Vs$, respectively. However, the mobility of the device with the Au/Ti electrode was increased up to $0.26cm^2/Vs$ after 2 weeks, while the mobility of the device with ITO electrode was slightly decreased down to $0.41cm^2/Vs$. The experimental data show us that ITO could be used as the S/D electrode for low-cost OTFT devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.543-543
• /
• 2013

Thin-film transistors (TFTs) based on oxide semiconductors have been regarded as promising alternatives for conventional amorphous and polycrystalline silicon TFTs. Oxide TFTs have several advantages, such as low temperature processing, transparency and high field-effect mobility. Lots of oxide semiconductors for example ZnO, SnO2, In2O3, InZnO, ZnSnO, and InGaZnO etc. have been researched. Particularly, zinc-tin oxide (ZTO) is suitable for channel layer of oxide TFTs having a high mobility that Sn in ZTO can improve the carrier transport by overlapping orbital. However, some issues related to the ZTO TFT electrical performance still remain to be resolved, such as obtaining good electrical contact between source/drain (S/D) electrodes and active channel layer. In this study, the bottom-gate type ZTO TFTs with staggered structure were prepared. Thin films of ZTO (40 nm thick) were deposited by DC magnetron sputtering and performed at room temperature in an Ar atmosphere with an oxygen partial pressure of 10%. After annealing the thin films of ZTO at $400^{\circ}C$ or an hour, Cu, Mo, ITO and Ti electrodes were used for the S/D electrodes. Cu, Mo, ITO and Ti (200 nm thick) were also deposited by DC magnetron sputtering at room temperature. The channel layer and S/D electrodes were defined using a lift-off process which resulted in a fixed width W of 100 ${\mu}m$ and channel length L varied from 10 to 50 ${\mu}m$. The TFT source/drain series resistance, the intrinsic mobility (${\mu}i$), and intrinsic threshold voltage (Vi) were extracted by transmission line method (TLM) using a series of TFTs with different channel lengths. And the performances of ZTO TFTs were measured by using HP 4145B semiconductor analyzer. The results showed that the Cu S/D electrodes had a high intrinsic field effect mobility and a low effective contact resistance compared to other electrodes such as Mo, ITO and Ti.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1592-1596
• /
• 2010

According to the increase of the channel length with fixed width/length, characteristic curves of drain current as a function of gate bias voltage of indium gallium zinc oxide (IGZO) thin-film transistors moved to a positive direction of gate voltage, and field-effect mobility decreased. In case of fixed length and width of channel, field-effect mobility was lower and subthreshold slope was larger when drain bias voltage was higher. Due to large work function of IGZO, band bending at the junction region between IGZO channel and source/drain electrodes was expected to be in opposite direction to that between silicon and metal electrodes; this could explain the above results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.10
• /
• pp.885-888
• /
• 2008

We present simulation results on DC characteristics of AlGaN/GaN HEMTs having trench shaped source/drain Ohmic electrodes. In order to reduce the contact resistance in the source and drain region of the conventional AlGaN/GaN HEMTs and thereby to increase their DC output power, we applied narrow-shaped-trench electrode schemes whose size varies from $0.5{\mu}m$ to $1{\mu}m$ to the standard AlGaN/GaN HEMT structure. As a result, we found that the drain current was increased by 13 % at the same gate bias condition and the transconductance (gm) was improved by 11 % for the proposed AlGaN/GaN HEMT, compared with those of the conventional AlGaN/GaN HEMTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1197-1199
• /
• 2009

Self-alignment for the fabrication of printed thin film transistors has become of great interest because of the resolution and registration limits of printing technologies. In this work, self-patterning and selfregistration processes are introduced, which do not need surface energy patterning and the resulting minimum gate channel length could be down to $11.2{\mu}m$ with the sheet resistance of 2.6 ${\Omega}/{\square]$ for the source and drain electrodes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.396-396
• /
• 2009

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.91-93
• /
• 2008

The organic field-effect transistors with step-edge structure were fabricated. Source and drain electrodes were obliquely deposited by vacuum evaporation. The step-edge of the gate electrode serve as a shadow mask, and the short channel is formed at the step-edge. The excellent device performances were obtained.