• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.329-336
• /
• 1998

The characteristics of vibration and sound signals which occurs at the driving system of electric train are investigated in this study since the vibration of driving system is one of the main sources of vibration and sound in electric train. The vibration signals are changed its signal patterns during the transmission from the source to passengers due to noise or several unknown factors. To avoid the complexity of actual signals of electric train, signals from experimental apparatus of motor/gear driving system are analyzed to find the appropriate method of analysis and to characterize the signal patterns. The used methods are waterfall diagram, transfer function and modal analysis. The results shows that the vibration signals are usually originated from motor bearing and gear meshing and these signals are transmitted to bottom or bogie. Also, the sound signal is similar to the vibration of bottom or bogie, but it is not so clear to figure out the source of vibration.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.291-294
• /
• 2005

In this study, we compared and analyzed the floor impact sound insulation performance produced by the rating methods. The rating methods are using reversed A-weighting curve, A-weighted sound pressure levels and arithmetic average. On-site floor impact sound pressure levels of living room and room are measured. The results of this study are 1)the rating using reversed A-weighting curve for heavy-weight impact sound's standard deviation is lower than that of light-weight impact sound, 2)the number of rating using A-weighted sound pressure levels and arithmetic average is larger than that of using reversed A-weighting curve, and 3)the number of rating using reversed A-weighting curve mainly depends on impact sound pressure level of 63Hz in heavy-weight impact sound.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.41-45
• /
• 1991

구조 진동에 의해 발생하는 Relative Sound Power를 계산하는 문제가 최근 에 중요시되고 있다. 이 논문에서는 조화적인 집중하중에 대한 무한 탄성보 에서 방출하는 Relative Sound Power를 연구한다. Sound Power는 수치적으 로 적분되고 몇가지 인자들의 함수로써 적분인자를 표시하였다. Keitie와 Peng[2]는 진동하는 보로부터의 방출하는 Relative Sound Power에 대한 하 중 길이의 효과, 그리고 water 하중을 받는 보에서 방출하는 Acoustic radiation에 대한 Source 운동과 기초 강성의 효과를 연구하였다. 보의 진동 응답에서 light fluid loading과 heavy fluid loading에 의한 양쪽의 반응을 고 려한다. 보에는 기초 강성과 Damping 그리고 장력이 작용한다. water 하중 과 air 하중을 받는 보에서 Damping의 변화에 대한 보로부터 방출하는 relative sound power의 크기를 결정하였다. 일반적으로 인장력보다 압축력 이 작용할 때 relative sound power level이 크다는 것을 알고 있다. 실제로 인장력이나 압축력이 보에 작용할 때 relative sound power에 얼마나 영향을 미치는가를 계산하였다. 그리고 진동계로부터 방출하는 sound fluid loading 과 기초 강성에 기인한 복잡한 효과를 해석하였다. 이 논문의 목적은 강성계 수와 wavenumber 비, 그리고 fluid loading에 대한 sound power의 응답에 대하여 설명하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.273-278
• /
• 2002

Booming sound is one of the most important interior sound of a passenger car. The conventional booming noise research was focused on the reduction of the A-weighted sound pressure level. However A-weighted sound pressure level can not give the whole story about the booming sound of a passenger car. In this paper, we employed sound metric which is the subjective parameter used in psycoacoustics. According to recent research results, the relation between sound metrics and subjective evaluation is very complex and has nonlinear characteristics. In order to estimate this nonlinear relationship, artificial neural network theory has been applied to derivation of sound quality index for booming sound of a passenger car.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.298-309
• /
• 2007

There are various sounds in the car as much as cars have many mechanical parts. These sounds make various psychological development. The international competition in car markets has continuously required the research about the sound quality of a car. The domestic car makers have also invested a lot of money for the research and development of sound quality. Car axle plays an important role in a vehicle and its NVH development is also important. By this time, NVH development of car axle is mainly based on the reduction of sound pressure level (dBA), which cannot gives, the satisfaction to the customers in view of the sound quality of a vehicle. Therefore, in this paper, a sound quality index evaluating the sound quality of axle noise based on human sensibility is developed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.7-15
• /
• 1995

Sound pressure and particle velocity are the most essential quantities prescribing a sound field; they correspond to voltage and electric current respectively, in electric system. As electric power is the product of voltage and electric current, sound intensity is the product of sound pressure and particle velocity and it means the acoustic power passing through a unit area in a sound field. Although the definition of sound intensity is very simple as mentioned above, the method of measuring this quantity has not been realized for a long time, because it has been very difficult to measure the particle velocity simultaneously with the sound pressure. Owing to the recent development of such technologies as transducer production and digital signal processing, it has finally been realized. According to the sound intensity(SI) method, the sound power flow in an arbitrary sound field can be directly measured as a vector quantify. In this paper, the principle of the SI method is briefly explained at first and some examples of its application made in the author's laboratory are introduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.628-634
• /
• 2003

Rumbling sound is one of the most important interior sound of a passenger cu. The conventional rumbling noise research was focused on the reduction of the A-weighted sound pressure level. However A-weighted sound pressure level can not give the whole story about the rumbling sound of a passenger car. In this paper, we employed sound metric which is the subjective parameter used in psycoacoustics. According to recent research results, the relation between sound metrics and subjective evaluation is very complex and has nonlinear characteristics. In order to estimate this nonlinear relationship, artificial neural network th[ ory has been applied to derivation of sound quality index fur rumbling sound of a passenger car.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.506-509
• /
• 2006

Shaped Sound Focusing is defined as the generation of acoustically bright shape in space using multiple sources. The acoustically bright shape is a spatially focused region with relatively high acoustic potential energy level. In view of the energy transfer, acoustical focusing is essential because acoustic energy is very small to use other type of energy. Practically, focused sound shape control not a point is meaningful because there are so many needs to enlarge the focal region especially in clinical uses and others. If focused sound shape can be controlled, it offers various kinds of solutions for clinical uses and others because a regional focusing is essentially needed to reduce a treatment time and enhance the performance of transducers. For making the shaped-sound field, control variables, such as a number of sources, excitation frequency, source positioning, etc., should be taken according to geometrical sound shape. To verify these relations between them, wavenumber domain matching method is suggested because wavenumber spectrum can provide the information of control variables of sources. In this paper, the procedures of shaped sound focusing using wavenumber domain matching and relations between control variables and geometrical sound shape are covered in case of an acoustical ring.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.5
• /
• pp.85-96
• /
• 1992

Engine enclosures are widely adopted to reduce the noise emission in various fields of application. The radiated noise, which is due to the vibration of enclosure's outer surface, is composed of two kinds of sound power with different path of propagation. One is the 'structure-borne sound power' which stems from the engine's vibratory force applied to the structure of enclosure through the mounting parts of engine etc., while the other is the 'air-borne sound power' which is originated by the sound power radiated from the engine surface to the inner space of enclosure that should excite the vibration of enclosure from inside. In order to get a most efficient engine enclosure is required a profound consideration upon the above structure-borne and air-borne noise, since the guiding principle of countermeasure for each noise is quite different. The controlling of input vibration and its isolation are major subject for the structure-borne sound power and the specifications of absorbing member and damping panels are the major interests for the air-borne sound power. Hence it seems very efficient to separate the total sound power into two categories with a great accuracy when one think of further reduction of engine noise from the exciting enclosure, however, its separating methods have not been made clear for many years. Then author proposes a new practical separation method of two propagation path's contribution to the total radiation sound power for the enclosure under the engine operating condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.46-51
• /
• 2005

The vacuum cleaner motor runs at very high speed for suction power. Specially, motor power is provided by the impeller being rotated at very high speed. The centrifugal fan consists of the impeller, the diffuser, and the circular casing. Due to the high rotating speed of the impeller and small gap distance between the impeller and the diffuser, the level of noise in the centrifugal fan is at BPF(Blade Passage Frequency) and its harmonic frequencies. In order to calculate the sound pressure of centrifugal fan, unsteady flow data are needed. The cause of noise is obtained by dividing the fluid noise by exhaust flow of fan and vibration noise by rotational vibration of vacuum cleaner fan motor. Until now, an accelerometer has been used to measure vibration. However, it can not measure vibration in some parts of brush and commutator because of motor construction and 3-D vibrating mode. This study was conducted to perform accurate analysis of vibration and aerodynamic sound for fan motor in a vacuum cleaner using a laser vibration analyzer. A silent fan motor can be designed using the data measured in this study.