• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.452-459
• /
• 2020

The electric actuator receives the user's command input signal (open/closed/stop), checks the status of various sensors (valve position, rotational force, motor status, etc.)in the actuator, and controls the motor forward/reverse to open and close the valve. It is a device that outputs the current state of an actuator (valve) and is used in various fields such as dams, power plants, water and sewage facilities, and oil pipeline facilities. If an electric actuator is installed in a power plant and a problem occurs during operation, it can cause a large economic loss, so system reliability is vert important. In this study, in order to increase the safety of the electric actuator, the development of an electric actuator control device capable of setting the ON/OFF time in hardware was conducted to solve the reliability problem that may occur in software. In addition, the electric actuator control device development environment was developed using Xilinx's Spartan7 FPGA and Altium tool.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1568-1574
• /
• 2009

One of the most difficult problems in user requirement engineering is the communication gap that exists between different end-users, stakeholders, and software engineers. Since scenarios allow different stakeholders to describe and review the problem in their own language instead of some abstract model, they are also a solution to the problem. We propose a progressive, iterative and interleaved process of using scenario at different requirement engineering stages including elicitation, analysis and validation. This process model has been applied to our TRES System. In our proposed system, we combine prototype, scenarios and use cases in a single and comprehensive framework to avoid most of the shortcomings in other tools. Our system is an XML-based system for scenario-driven requirement engineering. Within the TRES system, scenarios are stories capture information about users and their tasks, including the context of use. In our TRES system, scenarios are stored in XML-based database and described using XML notation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1022-1026
• /
• 2013

Recently, the waste heat recovery technique using thermoelectric generator (TEG) in automotive engine has emerged to improve thermal efficiency in commercial vehicle. It is not difficult to recognize the numerous attempts that have been made to develop the TEG simulation model, but it is hard to find the model in conjunction with a particular heat engine system. In this study, 1-D commercial software AMESim was used to develop a computational model that can assess waste heat recovery from a diesel engine exhaust using TEG. The developed TEG simulation model can be used for evaluating the TEG performance of various types of TE module, and the diesel engine model can simulate any type of on and off-road diesel engines. The simulation results demonstrated that approximately 544.75W could be recovered from the engine exhaust and 40.4W could be directly converted into electricity using one TE module. The models developed in this study can be easily coupled with each other in the same computational program; thus, the models are expected to provide a viable tool for developing and optimizing a TEG waste heat recovery system in an automotive diesel engine.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.29-36
• /
• 2017

Universal soil loss equation (USLE) has been frequently employed to estimate potential soil loss in land since it was developed based on the statewide data measured and collected in the United States. The equation is an empirical model mainly used for U.S. soil, thus it has been recently modified to reflect Korean soil conditions and named as Korean Soil Loss Equation (KORSLE). The modified equation was implemented in ArcGIS software, and used for estimation of potential soil loss from 2003 to 2016 in the thirty-eight Water Protection Districts. Five out of the thirty-eight districts were identified as the area of potential soil erosion most severly. In those five districts, potential soil erosion were estimated to be more than 50 Mg/ha/year that requires site investigation under supervision of the Korean Ministry of Environment. Distinctive site characteristics were found in the potential soil loss estimation such that the districts of low potential soil loss had low five factors in the aggregate. However, if one of more factors are dominantly large, the potential soil loss significantly increased. This study provides a useful tool to identify the potential areas for soil erosion and the important factors that play an important role in the estimation process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.464-464
• /
• 2010

A few years ago, for maintaining high stability and production yield of production equipment in a semiconductor fab, on-line monitoring of wafers is required, so that semiconductor manufacturers are investigating a software based process controlling scheme known as virtual metrology (VM). As semiconductor technology develops, the cost of fabrication tool/facility has reached its budget limit, and reducing metrology cost can obviously help to keep semiconductor manufacturing cost. By virtue of prediction, VM enables wafer-level control (or even down to site level), reduces within-lot variability, and increases process capability, $C_{pk}$. In this research, we have practiced VM on $SiO_2$ etch rate with optical emission spectroscopy(OES) data acquired in-situ while the process parameters are simultaneously correlated. To build process model of $SiO_2$ via, we first performed a series of etch runs according to the statistically designed experiment, called design of experiments (DOE). OES data are automatically logged with etch rate, and some OES spectra that correlated with $SiO_2$ etch rate is selected. Once the feature of OES data is selected, the preprocessed OES spectra is then used for in-situ sensor based VM modeling. ICP-RIE using 葰.56MHz, manufactured by Plasmart, Ltd. is employed in this experiment, and single fiber-optic attached for in-situ OES data acquisition. Before applying statistical feature selection, empirical feature selection of OES data is initially performed in order not to fall in a statistical misleading, which causes from random noise or large variation of insignificantly correlated responses with process itself. The accuracy of the proposed VM is still need to be developed in order to successfully replace the existing metrology, but it is no doubt that VM can support engineering decision of "go or not go" in the consecutive processing step.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.1
• /
• pp.38-44
• /
• 2002

MFL method is a qualitative inspection tool and is a reliable, fast and economical NDT method. The application of MFL method to the inspection of storage tank floor plates has been shown to be a viable means. Examination of tank floors previously depended primarily upon ultrasonic test methods that required slow and painstaking application. Therefor most ultrasonic inspection of storage tank has been limited to spot testing only. Our NDE group have developed magnetic flux leakage system to overcome limitation of ultrasonic test. The developed system consists of magnetic yoke, array sensor, crawler and software. It is proved that the system is able to detect artificial flaw like 3.2mm diameter, 1.2mm depth in 6mm thick steel plate.

• The Journal of the Korea Contents Association
• /
• v.17 no.5
• /
• pp.1-7
• /
• 2017

Joint Collaborative Team on Video Coding (JCT-VC) of ISO/IEC MPEG and ITU-T developed the HEVC Screen Content Coding (HEVC SCC) standard as the HEVC extension for the screen content video coding. The Intra Block Copy (IBC) is the most effective tool adopted in HEVC SCC and predicts current block from already reconstructed neighboring blocks in the same picture. To reduce the amount of data in BV (Block Vector) to be transmitted, a BV predictor (BVP) is used to generate the BV differences in the IBC BV coding. In this paper, we analyze the current BV prediction process using HEVC reference software SCM-2.0 and SCM-4.0. Based on the analysis results, we propose an improved BVP candidate selection algorithm by adding a search process for adjacent BVs in addition to the existing spatial BVP candidates. Experimental results show that the BD-rate reduction of our proposed improvements ranges from 0.2% to 1%.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.353-362
• /
• 2000

Minimization of hemolysis is one of the key factors for successful axial flow blood pumps. It is, however, difficult to estimate the hemolytic performance of axial flow blood pumps without experiments. Instead, the Computational Fluid Dynamics(CFD) analysis enables the prediction of hemolysis. Three-dimensional fluid dynamics of axial flow pumps with different impellers were analyzed using the CFD software, FLOTRAN. The turbulence model k-$\varepsilon$ was used. The changes in turbulent kinetic energy applied to each particle (red blood cell) flowing through the pumps were computed and displayed by the particle trace method (particle spacing of 10 msec). Also, the Reynolds shear stress was calculated from the turbulent kinetic energy. The shear stress was higher behind the impellers than elsewhere. The CFD analysis could predict in vitro results of hemolysis and also the areas where hemolysis occurred. The CFD analysis was found to be a useful tool for designing less hemolytic rotary blood pumps.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.306-313
• /
• 2013

In this paper, we implemented the matching system between user-centered ubiquitous virtual reality and the real world for smart home control. Implemented system consists of the smart devices that are equipped with the ubiquitous virtual reality, the hardware for a real-world representation, and the matching software. To communication and data control, we designed the TCP/IP communication protocol, and used the WPAN-based 802.15.4 ZigBee module. The main point of proposed the authoring tool-based ubiquitous virtual reality is the user-centered environment that users can place the objects such as smart TV, home appliances similar to embellish their home structure. Some experiments are conducted so as to verify the proposed model, and as a results, the proposed matching system is well performed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.447-453
• /
• 2004

In this paper, we propose a new system to block harmful Internet information based on IP spoofing. The proposed system is located on a organization's internal network and monitors all outgoing traffic and lets all this traffic go outside. Once the proposed system detects a host's access to a harmful site, it sends the host a pseudo RST packet that pretends to be the response from the harmful site, and prevents the connection between the host and the harmful site. The proposed software system is installed on only a server, and need not be installed on user hosts at all. Thus we can maintain and upgrade the blocking system easily. The performance evaluation of the proposed system shows that it effectively blocks the access to the harmful sites. Since the proposed system is based on IP spoofing, it can be used badly as a hacking tool. Finally we propose some methods to eliminate this possibility.