• 대한두경부종양학회지
• /
• 제29권2호
• /
• pp.48-50
• /
• 2013

Angiomyoma is a rare, benign smooth muscle cell tumor. These tumors may be found anywhere in the body. They frequently occur in the lower extremities except venous type. Angiomyoma in the head and neck area is very rare, and only a few cases have been reported. A 63 year-old male patient visited to outpatient clinic due to size-growing nodule-like lesion in the Lt. alar area. Excisional biopsy was done for diagnosis. The lesion was totally excised with 2 mm safety margin. Frozen biopsy of the lesion was requested, and all resection margins were proved negative. To cover the raw surface, full thickness skin grafting was performed. The graft was harvested from Rt. posterior auricular area. Tie over dressing was applyed on Lt. alar area. The graft was well taken and healed without any complication in both short term and long term follow up periods of 2 weeks, 1 month, 2 months, and 6 months. Donor site completed healed without any complications. The leiomyoma is benign tumor originated from smooth muscle, and it can be classified into solid leiomyoma, angiomyoma, and epithelioid leiomyoma. Especially, the angiomyoma consists of smooth muscle cell and blood vessel, and it is originated from the tunica media of blood vessel. Angiomyoma alone frequently occurs in the lower extremities as solitary painless subcutaneous tumor. Venous type of angiomyoma in the oral cavity was reported in other references, but on the facial surface it may be the first case reported as paper. So this report can be very meaningful.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.254-257
• /
• 2009

The crystallization and activated annealing effect of Si films using an excimer laser and a new CW blue laser are described comparing with furnace annealing (SPC) for the application of advanced TFTs and future applications. Currently, pulsed ELA is used extensively as a LTPS process on glass substrates as the efficiency is high in UV region for thin Si film of 40- 60 nm thickness. ELA enables extremely low resistivity for both n- and p-typed Si films. On the other hand, CW BLDA enables the smooth Si surface having arbitral grains from micro-grains to anisotropic huge grain structure only controlling its power density.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1444-1446
• /
• 2009

The atmospheric pressure plasma polymerization of acrylate monomers was carried out to have dielectrics with easy preparation and high performance. The effects of discharge power, monomer concentration and deposition time on film properties were investigated using various characterization tools. With proper conditions, smooth dielectric layer of 100nm thickness was obtained. Dielectric property as organic dielectric layer has been studied for future applications in organic thin film transistors(OTFT).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1733-1736
• /
• 2008

ZnO thin films with preferred orientation along the (0 0 2) plane were fabricated by a sol-gel method. The effects of the annealing temperature, time, and thickness were studied by investigating UV-visible spectra, FT-IR spectra, and XRD of ZnO films. The films were dried and annealed ed at $100^{\circ}C,\;200^{\circ}C$, and $300^{\circ}C$ for 1hr, 2hrs, and 3hrs, respectively. The film showed the preferred (0 0 2) orientation and high transmittance near 90% in the visible range. Also, SEM images of the films exhibited very smooth surfaces without holes and cracks. Schottky diodes were fabricated by using ZnO sol-gel material. Au and Al were used as electrodes to make Ohmic and Schottky contacts, respectively. The annealing temperature, time and the thickness dependent I-V characteristics were presented in this article.

• Applied Microscopy
• /
• 제46권3호
• /
• pp.155-159
• /
• 2016

This paper analyses the relationship between the distribution of a dielectric layer on the apex of a metal field electron emitter and the distribution of electron emission. Emitters were prepared by coating a tungsten emitter with a layer of epoxylite resin. A high-resolution scanning electron microscope was used to monitor the emitter profile and measure the coating thickness. Field electron microscope studies of the emission current distribution from these composite emitters (Tungsten-Clark Electromedical Instruments Epoxylite resin [Tungsten/CEI-resin emitter]) have been carried out. Two forms of image have been observed: bright single-spot images, thought to be associated with a smooth substrate and a uniform dielectric layer; and multi-spot images, though to be associated with irregularity in the substrate or the dielectric layer.

• 소성∙가공
• /
• 제5권2호
• /
• pp.138-144
• /
• 1996

The differences of formability with maximum cup depth of drawn product and thickness strain distribution are compared for two kinds of blank shapes which are suggested optimum shape and conventional square shape. The suggested blank is determined by backward tracing technique of rigid-plastic FEM. The deeper cup without wrinkle and flange part could be obtained from the suggested blank shape however the cross sevtion sup from the square blank could not be kept smooth thickness strain distribution and defended those phenomena..

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1576-1578
• /
• 2004

The alumina membrane with nano sized pore was prepared from aluminum by anodic oxidation to apply for storage equipment, gas sensor and stamper. The pore size and cell size of the pores are controlled by anodic oxidation voltage. The alumina thickness was controlled by etching process using 0.2M $H_3PO_4$. The thickness of alumina on Si wafer was very accurately controlled by anodic oxidation time. Nickel with nano-sized grain was electroplated on the Au layer on silicon wafer. The fabricated pores on alumina membrane was the thickness of $7{\sim}10{\mu}m$ with straight nano-sized pore of 307${\sim}$120nm. The alumina by the etching process shows smooth surface. The size of Ni grain was 130nm and 250nm for 10mA/$cm^2$and 20mA/$cm^2$of electroplating currents, respectively.

• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.396-402
• /
• 2004

The purpose of this study was to investigate the difference of cotton fabric texture perceived between on-line(screening fabric) and off-line(real fabric), and to analyze fabric characteristics having an effect on the difference. The similarity of 55 various cotton fabrics perceived between on-line and on-line were measured showing simultaneously real fabrics and screening fabrics by 7-scale questionnaire. And the characteristics of cotton fabrics such as weave structure, thickness, weight, fabric density, stiffness, Hunter's L, a, b, and hue were measured. Cotton fabrics were classified into 3 groups by extent of similarity. There were no significant differences in weft density, stiffness, Hunter's L, a, b, and hue among 3 groups. But there were significant differences in weave structure, thickness, weight, warp density, and difference of warp ＆ weft density. The fabrics having large similarity were thick and heavy, had small warp density and difference of warp ＆ weft density, and distinct surface texture. The group having medium similarity included fabrics of medium thickness and weight, having weak surface texture, large warp density and difference of warp ＆ weft density. The group having small similarity, which the differences between on-line and off-line were large, included thin and light fabrics having smooth surface and large warp density and difference of warp ＆ weft density.

• 한국표면공학회지
• /
• 제30권3호
• /
• pp.191-201
• /
• 1997

Non-passivated electrolytic tinplates withour conventinal chemical treatment self-oxidize in ambient atmosphere to from yellow stain on the outermost surface during the long-term storage. The degree of yellowness of the stain increased linerly with the oxide thickness due to the interfeefence color of the $SnO_2$ Even though the thickness of the oxide layer was very thin, less than 100$\AA$ , it exerts an undesirable influence on the can-making processes, particularly the stripping behavior after ironing. Investigations were carried out on the morphologies of the coating layer, the changes in oxide thickness during successive can-making processes and the averge friction coefficients with the different oxide thinkness. These oxide layers were broken up and distributed within the bulk tin coating during the ironing process. This redistribution of the oxide layer prvented smooth pressing-aside of the tin coating layer, resulting in an increase in the ironing friction coefficient. As the friction was increased, the residual stress along the can wall thinkness(i.e., the hoop stress) was also increased. Due to both the oxibe layer accumulation, which increased the friction coefficient, and the hoop stress, can stripping efficiency without roll-back is reduced.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.16-20
• /
• 2021

In this study, we tried finding new materials to improve the stain resistance properties of polymer insulating materials. Using the filtered vacuum arc source (FVAS) with a graphite target source, DLC thin films were deposited on silicon and polymer insulator substrates depending on their thickness to confirm the surface properties, physical properties, and structural properties of the thin films. Subsequently, the possibility of using a DLC thin film as a protective coating material for polymer insulators was confirmed. DLC thin films manufactured in accordance with the thickness of various thin films exhibited a very smooth and uniform surface. As the thin film thickness increased, the surface roughness value decreased and the contact angle value increased. In addition, the elastic modulus and hardness of the DLC thin film slightly increased, and the maximum values of elastic modulus and hardness were 214.5 GPa and 19.8 GPa, respectively. In addition, the DLC thin film showed a very low leakage current value, thereby exhibiting electrical insulation properties.