• 한국방재학회지
• /
• 제2권4호
• /
• pp.40-47
• /
• 2002

Since it is important to understand the bio-climatic change in Seoul for ecological city planning in the future, this paper gives an overview on bio-climate analysis of urban environments at Seoul. We analyzed its characteristics in recent years using the observations of 24 of Automatic Weather Station (AWS) by Korea Meteorological Administration (KMA). In urbanization, Seoul metropolitan area is densely populated and is concentrated with high buildings. This urban activity changes land covering, which modifies the local circulation of radiation, heat and moisture, precipitation and creating a specific climate. Urban climate is evidently manifested in the phenomena of the increase of the air temperature, called urban heat Island and in addition urban sqall line of heavy rain. Since a city has its different land cover and street structure, these form their own climate character such as climate comfort zone. The thermal fold in urban area such as the heat island is produced by the change of land use and the air pollution that provide the bio-climate change of urban eco-system. The urban wind flow is the most important climate element on dispersion of air pollution, thermal effects and heavy shower. Numerical modeling indicates that the bio-climatic transition of wind wake in urban area and the dispersion of the air pollution by the simulations of the wind variation depend on the urban land cover change. The winds are separately simulated on small and micro-scale at Seoul with two kinds of kinetic model, Witrak and MUKLIMO.

• 한국항만학회지
• /
• 제15권1호
• /
• pp.57-74
• /
• 2001

In the past, the predictions of beach processes and harbor sedimentation were mainly relied on the hydraulic model tests and empirical methods. In recent years, however, as computers have come into wide use, more accurate models have gradually been developed and thus replaced those conventional methods. For prediction of topographical change near the coastal area, we need informations of wave and current conditions in the numerical model which should be calculated in advance. Numerical model introduced in this study combines wave refraction-diffraction, breaking, bottom friction, lateral mixing, and critical shear stress and three sub-models for simulating waves, currents, and bottom change were briefly discussed. Simulations of beach processes and harbor sedimentation were also described at the coast neighboring Bangpo Harbor, Anmyundo, Chungnam, where the area has suffered accumulation of drifting sand in a small fishing harbor with a wide tidal range. We also made model test for the new layout of the harbor and planned south breakwater for preventing intrusion of sand. Although the model study gave reasonable description of beach processes and harbor sedimentation mechanism, it is necessary to collect lots of field observation data, including waves, tides and bottom materials, etc. for better prediction.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.29-33
• /
• 2011

Film growth rate and composition variation are numerically analyzed during the selective area growth of InGaN on the GaN triangular stripe microfacet in this study. Both the vapor phase diffusion and the surface diffusion are considered to determine the In composition on the InGaN surface. To obtain the In composition on the surface, flux of In atoms due to the surface diffusion is added to the concentration determined from the Laplace equation which is governing the gas phase diffusion. The solution model is validated by comparing the growth rates from the analyses to the experimental results of GaN and InN films. The In composition and resulting wave length are increased when the surface diffusion is considered. The In content is also increased according to the increasing mask width. The effect of mask width to the In content and wave length is increasing in the case of a small open region.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권6호
• /
• pp.37-45
• /
• 2018

The source of Chusan Spring water in the Ulleungdo is the precipitation in the Nari caldera basin, which permeates in the Trachitic pumice and tuff area and moves downward, outflowing at the lithologic boundary between the trachyte and Nari tuff. It is known that the discharge rate of the Chusan Spring is large enough to be used for the small hydroelectric power generation, but the exact discharge rate and hydrogeologic characteristics have not been known. The discharge rates of the Spring were measured 11 times, which ranged from $15,220m^3/d$ to $36,278m^3/d$. The discharge rates, measured by the automatic level recorder, for two-year period, were $20,000{\sim}38,000m^3/d$. The variation of discharge rates did not coincide with rainfall event, but showed daily increases of $3,000{\sim}5,000m^3/d$. The annual discharge rate excluding the evapotranspiration and the surrounding stream discharge corresponded to 70.6% of the annual precipitation of the recharge area. Therefore, meteorological observations at the Nari basin, rather than the Ulleung-do meteorological station, are more appropriate to properly interpret the discharge characteristics of the Chusam Spring and the recharge rate of the basin.

• 수산해양기술연구
• /
• 제51권1호
• /
• pp.16-25
• /
• 2015

Visual census and hydro-acoustic survey was carried out at Ulju small scale marine ranching area (MRA) to estimate demersal fish aggregations on September and November 2013. In this hydro-acoustic survey, the authors combined an image sonar with a scientific echo sounder to monitor an underwater situation and compare two acoustic data. Consequently, visual census survey was useful to estimate fish species composition for hydro-acoustic survey, because it is easy to identify aggregated fish species and overcome limits on a fishing depth and ability of an conventional fishing gear like a bottom gill-net or a fish trap at marine ranching area. Mean fish density was estimated as $0.757g/m^2$ on September and $0.219g/m^2$ on November and Fish abundance was finally calculated as 1.51ton (coefficient of variation, CV=13.1%) on September and 0.44ton (CV=47.7%) on November, respectively. Hydro-acoustic survey combined with the image sonar was useful to monitor fish aggregations and estimate fish stocks around artificial reefs at shallow coastal MRA. We were able to easily identify the underwater structures like an artificial reef and a fishing rope as well as fish aggregations from image sonar data. Therefore, the method was effective to separate unwanted echo signals in acoustic data of scientific echo sounder.

• 한국입자에어로졸학회지
• /
• 제8권4호
• /
• pp.173-180
• /
• 2012

SiC particles, 8.3 ${\mu}m$ in volume average diameter, were chlorinated in an alumina tubular reactor, 2.4 cm in diameter and 32 cm in length, with reactor temperature varied from 100 to $1200^{\circ}C$. The flow rate of the gas admitted to the reactor was held constant at 300 cc/min, the mole fraction of chlorine in the gas at 0.1 and the reaction time at 4 h. The chlorination was negligibly small up to the temperature of $500^{\circ}C$. Thereafter, the degree of chlorination increased remarkably with increasing temperature until $900^{\circ}C$. As the temperature was increased further from 900 to $1200^{\circ}C$, the increments in chlorination degree were rather small. At $1200^{\circ}C$, the chlorination has nearly been completed. The surface area of the residual carbon varied with chlorination temperature in a manner similar to that with the variation of chlorination degree with temperature. The surface area at $1200^{\circ}C$ was 912 $m^{2}/g$. A simple model was developed to predict the conversion of a SiC under various conditions. A Langmuir-Hinshelwood type rate law with two rate constants was employed in the model. Assuming that the two rate constants, $k_{1}$ and $k_{2}$, can be expressed as $A_{1e}^{-E_{1}/RT}$ and $A_{2e}^{-E_{2}/RT}$, the four parameters, $A_{1}$, $E_{1}$, $A_{2}$, and $E_{2}$ were determined to be 32.0 m/min, 103,071 J/mol, 2.24 $m^{3}/mol$ and 39,526 J/mol, respectively, through regression to best fit experimental data.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2003년도 제27회 추계학술대회
• /
• pp.44-44
• /
• 2003

As a basic measurement tool in the areas of animal models of human disease, gene expression and therapy, and drug discovery and development, small animal PET imaging is being used increasingly. An ideal small animal PET should have high sensitivity and high and uniform resolution across the field of view to achieve high image quality. However, the combination of long narrow pixellated crystal array and small ring diameter of small animal PET leads to the degradation of spatial resolution for the source located at off center. This degradation of resolution can be improved by determining the depth of interaction (DOI) in the crystal and by taking into account the information in sorting the coincident events. Among a number of 001 identification schemes, dual layer phsowich detector has been widely investigated by many research groups due to its practicability and effectiveness on extracting DOI information. However, the effects of each crystal length composing dual layer phoswich detector on DOI measurements and image qualities were not fully characterized. In order to minimize the DOI effect, the length of each layer of phoswich detector should be optimized. The aim of this study was to perform simulations using a simulation tool, GATE to design the optimum lengths of crystals composing a dual layer phoswich detector. The simulated small PET system employed LSO front layer LuYAP back layer phoswich detector modules and the module consisted of 8${\times}$8 arrays of dual layer crystals with 2 mm ${\times}$ 2 mm sensitive area coupled to a Hamamatsu R7600 00 M64 PSPMT. Sensitivities and variation of radial resolutions were simulated by varying the length of LSO front layer from 0 to 10 mm while the total length (LSO + LuYAP) was fixed to 20 mm for 10 cm diameter ring scanner. The radial resolution uniformity was markedly improved by using DOI information. There existed the optimal lengths of crystal layers to minimize the variation of radial resolutions. In 10 cm ring scanner configuration, the radial resolution was kept below 3.4 mm over 8 cm FOV while the sensitivity was higher than 7.4% for LSO 5 mm : LuYAP 15 mm phoswich detector. In this study, the optimal length of dual layer phoswich detector was derived to achieve high and uniform radial resolution.

• 지질공학
• /
• 제25권2호
• /
• pp.291-298
• /
• 2015

지하수 흐름 해석 및 대수층의 특성 파악, 지하수 유동모델 보정 등과 같은 수리지질학적 연구에서 가장 중요한 요소 중 하나가 수리수두를 파악하는 것이다. 본 연구에서는 해안 인근 지역의 다중패커가 설치된 8개 관측공(GM-1~GM-8)의 각 구간별 수리수두를 분석하였으며 심도와 위치에 따른 수리경사 변화를 규명하였다. 수리수두는 관측공 심도에 따른 변화를 표현하기 위해서 표고로부터 수두까지의 심도로 표준화하였다. 해안에 가장 가깝게 위치한 GM-5은 수리경사가 0.0142로서 심도가 깊어질수록 수두가 증가하는 경향을 보이며, 전형적인 배출지역의 특성을 보인다. 한편, 해안인근의 GM-1, GM-2는 심도 약 100 m까지 수리수두가 대체로 일정하나, 심도 100 m 보다 깊어지면 수리경사가 각각 0.0196, 0.0735로 나타났다. 이는 심도 100 m 이내에서는 지하수의 수평적인 흐름이 지배적이고, 심도 100 m 이상에서는 하부에서 상부로의 상향 흐름이 나타남을 지시한다. 해안에서 거리가 먼 곳에 위치한 GM-3에서는 수리경사가 0.0046로서 낮으며 이는 함양지역과 배출지역의 중간에 위치하여 지하수의 수평적인 흐름이 우세하다는 것을 지시한다.

• Plant Resources
• /
• 제6권1호
• /
• pp.76-80
• /
• 2003

This study was conducted to investigate the relationships between yearly variations of meteorological elements and yearly variations of productivity in hot pepper. In addition, correlation coefficients among the yields and yield components were used to find out the relationships between meteorological elements and productivity. Yearly variation of the mean air temperature in May and July showed large with coefficients of variation(C.V.) of 25.0,8.9%, respectively, but the variation of the duration of sunshine in May were relative small. Yield and plant height was greatly with C.V. of 7.14,11.6%, respectively, diameter of fruit showed more or less C.V. of 2.28% and length of fruit showed less variation. Correlation coefficients between maximum temperature in period of cultivation from May and yield are positively significant at the level of 1 %. Correlation Coefficients between precipitation in period of cultivation from May to August and yield are negative significant at the level of 5 and 1 %, respectively. Correlation coefficients amount the plant height, length of fruit, diameter of fruit per plant, and seed yield were positively significant at the level of 1 %, respectively.

• Plant Resources
• /
• 제6권2호
• /
• pp.134-139
• /
• 2003

This study was conducted to investigate the relationships between yearly variations of meteorological elements and yearly variations of productivity in rice. In addition, correlation coefficients among yield and yield components were used to find out the relationships between meteorological elements and productivity. Yearly variation of the mean air temperature in May was large with coefficients of variation(C.V.) of 25.0%, but the variation of the duration of sunshine in May were relative small. No. of panicles per hill and 1,000 grains wt. of brown rice were great with C.V. of 21.1, 19.7%, respectively, brown rice yield show more or less C.V. of 5.5% and milled rice show still less variation. Correlation coefficients between temperatures in period of cultivation from May and yield were positive correlations. Correlation Coefficients between precipitation in period of cultivation from Sep. to Oct. and yield are positive correlations. Correlation coefficients amount the panicle length, no. of panicles, no. of spikelets, ratio of ripened grains, 1,000 grains wt. of brown rice, milled rice yield, brown rice yield and milled rice yield were positively significant at the level of 1 %, respectively.