• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.2
• /
• pp.136-143
• /
• 2013

The analysis of the written verdicts in recent five years was conducted to obtain preventive measures of collision between fishing vessel and non fishing vessel. As a result, a collision much happened in offshore trap for fishing vessel and below 5,000 tons of small and medium class for non fishing vessel. A person involved in a marine accident occupied 68% in sixth class deck officer and small boat operator for fishing vessel and 29% in third class deck officer for non fishing vessel. 90% of the collision happened in a underway by operating state and 84% in sight of one another by visibility state. The systemic radar training was required since 47% of the collisions was occurred on the condition of radar operation in fishing vessel. The main cause of poor lookout was a intensive fishing and poor lookout on movement by radar for fishing vessel and one man watch system and no recognition of one another by radar for non fishing vessel. This result is expected to contribute for the decrease of collision.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.34-35
• /
• 2019

The objective of this study is to analyze the risk of collision accidents to the VTSOs(Vessel Traffic Service Operators) as small vessels are expanded for monitoring targets. For this purpose, the risks of accidents and quasi-incidents involving small ships in the VTS area were analyzed by the collision risk model(CoRI) from the view-point of VTSOs. In addition, by analyzing risk of whether or not small vessels are included in the monitoring target by CoRI, we will contribute to the preparation of a proper range of the vessel for monitoring taget through various case studies in the future.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.85-90
• /
• 2006

The necessity of improving manning standards in the Ship Officer's Act has recently been strongly advocated by the fisheries industry. The fisheries industry maintained the position of the relaxation of current manning standards. However, the Labor unions, Marine Officers Association, and Radio Officers' Association persisted to strengthen the standards or to keep the current standards. This paper studies the appropriateness of current manning standards and processes its improvement scheme to secure the safe operation of vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.307-312
• /
• 2006

The necessity of improving manning standards in the Ship Officer's Act has recently been strongly advocated by the fisheries industry. The fisheries industry maintained the position of the relaxation cf current manning standards. However, the Labor unions, Marine Officers Association, and Radio Officers' Association persisted to strengthen the standards or to keep the current standards. This paper studies the appropriateness of current manning standards and proposes its improvement scheme to secure the safe operation of vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1031-1037
• /
• 2021

The frequency of marine accidents of vessels in Korea is steadily increasing and it is concentrated on small vessels with less than 10 tons of gross tonnage. Therefore, preventing capsizing accidents in small vessels is important to reduce the cost in terms of human and property damage due to such accidents. However, research on the seakeeping performance of small vessels has been insufficient, and there are no domestic and international regulations on seakeeping performance. Therefore, in this study, capsizing accidents caused by poor loading conditions were investigated by examining the adjudications of the small vessels in which the capsizing accidents occurred. Hydrostatic calculations and seakeeping performance analysis were performed for a representative vessel. A vessel generally performs a six-degree-of-freedom motion during operation. In this study, the response amplitude operator and response spectrum of a representative vessel were calculated to determine the roll motion. Moreover, a short-term statistical analysis of the vessel according to the loading conditions was performed for the wave stationary status for 3 h. From the results, it was estimated that, when the loading condition of a small vessel is poor, its roll motion increases, greatly reducing its stability.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1734-1744
• /
• 2015

Majority of marine accidents that occur on fishing vessels are engine accidents. This comprises more than 26 % of the total annual fishing vessel marine accident cases. Large numbers of engine accidents happen in the cooling water system, which are mostly caused by negligence on regular check-up and repair. Notably, small-sized ships have higher engine accidents occurrence rate compared to medium-and large-sized ships. Based on the Report of the Korea Ship Safety Technology Authority, engine accident cases reached 3,032 out of the total 3,081 cases. This study researches on the differences between the small-sized ship pilot, an operator of a vessel engine of less than 200 tons, and a 6th level marine engineer, in terms of the relationship between management forms and what causes the marine accidents in association with the cooling water system. It also studies and analyzes the differences in frequency of the accident occurrence between the two groups. ${\chi}^2$ qualification was imposed through the SPSS statistical analysis program and it got qualified at the significance level of 5%. The research shall be utilized as one of the base line data for the reduction of marine accidents.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.173-180
• /
• 2018

Marine casualties of small fishing vessels (SFV) of less than 20 tons are frequent in Korea. The analysis was conducted to identify the cause and then prepared reduction plan using the marine casualty statistics of fishing vessels for the last five years from 2012 to 2016 by the Korean Maritime Safety Tribunal to reduce the marine casualties of SFV. According to the analysis of the type of whole vessels occurring marine casualty, fishing vessels accounted for an average 68.0 %; moreover, except for 2014 when M/V SEWOL ferry capsizing occurred, the rate of death and missing due to marine casualties occurred from 68.3 % to 91.2 % in fishing vessels, and an average 79.5 % was found to be urgent need of a measure. Marine casualties occurrence depending on the gross tonnage of fishing vessel was found that the most occurred at less than 5 tons, followed by the order of 5 to 10 tons or less. However, crews who boarded on SFV do not have any training program for them, except for the fishing safety training of fisher who carry out fishing for shipowners and crew of the coastal and offshore fishing vessel in accordance with the safety regulations for fishing vessels in the Fisheries Cooperative Association. Therefore, it is necessary to revise the training program so as to improve the preventive action and then emergency response including the fishing safety compliance with each fishery, safe navigation, machinery inspection and emergency response. Also, an SFV of less than 5 tons of 56,000 vessels is boarded by unqualified fishers. It would also be possible to consider subdividing small boat operator's certificate to enhance their qualifications. It is expected that marine casualties of SFV will be reduced if active efforts are made to improve the safety consciousness of fisher and shipowners as well as the reorganization of fishing safety training and the small boat operator's certificate system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.3
• /
• pp.177-187
• /
• 2009

This paper describes a automatic video surveillance system(AVSS) with long range and 360$^{\circ}$ coverage that is automatically rotated in an elevation over azimuth mode in response to the TTM(tracked target message) signal of vessels tracked by ARPA(automatic radar plotting aids) radar. This AVSS that is a video security and tracking system supported by ARPA radar, CCTV(closed-circuit television) camera system and other sensors to automatically identify and track, detect the potential dangerous situations such as collision accidents at sea and berthing/deberthing accidents in harbor, can be used in monitoring the illegal fishing vessels in inshore and offshore fishing ground, and in more improving the security and safety of domestic fishing vessels in EEZ(exclusive economic zone) area. The movement of the target vessel chosen by the ARPA radar operator in the AVSS can be automatically tracked by a CCTV camera system interfaced to the ECDIS(electronic chart display and information system) with the special functions such as graphic presentation of CCTV image, camera position, camera azimuth and angle of view on the ENC, automatic and manual controls of pan and tilt angles for CCTV system, and the capability that can replay and record continuously all information of a selected target. The test results showed that the AVSS developed experimentally in this study can be used as an extra navigation aid for the operator on the bridge under the confusing traffic situations, to improve the detection efficiency of small targets in sea clutter, to enhance greatly an operator s ability to identify visually vessels tracked by ARPA radar and to provide a recorded history for reference or evidentiary purposes in EEZ area.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.3
• /
• pp.167-179
• /
• 2020

Recently, the increasing importance of artificial intelligence (AI) technology has led to its increased use in various fields in the shipbuilding and marine industries. For example, typical scenarios for AI include production management, analyses of ships on a voyage, and motion prediction. Therefore, this study was conducted to predict a response amplitude operator (RAO) through AI technology. It used a neural network based on one of the types of AI methods. The data used in the neural network consisted of the properties of the vessel and RAO values, based on simulating the in-house code. The learning model consisted of an input layer, hidden layer, and output layer. The input layer comprised eight neurons, the hidden layer comprised the variables, and the output layer comprised 20 neurons. The RAO predicted with the neural network and an RAO created with the in-house code were compared. The accuracy was assessed and reviewed based on the root mean square error (RMSE), standard deviation (SD), random number change, correlation coefficient, and scatter plot. Finally, the optimal model was selected, and the conclusion was drawn. The ultimate goals of this study were to reduce the difficulty in the modeling work required to obtain the RAO, to reduce the difficulty in using commercial tools, and to enable an assessment of the stability of medium/small vessels in waves.

• Nuclear Engineering and Technology
• /
• v.30 no.5
• /
• pp.403-415
• /
• 1998

The CANDU 6 reactor assembly consists of an array of 380 pressure tubes, which are installed horizontally in a large cylindrical vessel, the Calandria, containing the low pressure heavy water moderator. The pressure tube is located inside the calandria tube and the annulus between these tubes, which forms a closed loop with $CO_2$ gas recirculating, is called the Annulus Gas System(AGS). It is designed to give an alarm to the operator even for a small pressure tube leak by a very sensitive dew point meter so that he can take a preventive action for the pressure tube rupture incident. To judge whether the operator action time is enough or not in the design of Wolsong 2,3 & 4, the Leak Before Break(LBB) assessment is required for the analysis of the pressure tube failure accident. In order to provide the required data for the LBB assessment of Wolsong Units 2, 3, 4, a series of leak detection capability tests was performed by injecting controlled rates of heavy water vapour. The data of increased dew point and rates of rise were measured to determine the alarm set point for the dew point rate of rise of Wolsong Unit 2. It was found that the response of the dew point depends on the moisture injection rate, $CO_2$ gas flow rate and the leak location. The test showed that CANDU 6 AGS can detect the very small leaks less than few g/hr and dew point rate of rise alarm can be the most reliable alarm signal to warn the operator. Considering the present results, the first response time of dew point to the AGS $CO_2$ flow rate is approximated.