• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.389-395
• /
• 2013

Ethernet is the most widely deployed access network protocol around the world. IEEE 802.3az WG released the EEE standard based on LPI mode to improve the energy efficiency of Ethernet. This paper proposes improved adaptive power control mechanism that can enhance energy-efficiency based on EEE from small Ethernet switch. The feature of this mechanism is that it predicts the traffic characteristic of next cycle by measuring the amount of traffic flowing in during certain period and adjusts the optimal threshold value to relevant traffic load. Performance evaluation results indicate that the proposed mechanism improves overall performance compared to traditional mechanism, since it significantly reduces energy consumption rate, even though average packet delay increases a little bit.

• Smart Media Journal
• /
• v.13 no.1
• /
• pp.52-59
• /
• 2024

This paper proposes a plan to improve the reception radio environment of the mobile terminal and maintain a constant reception electric field by using small cells in a small closed environment. In order to configure an efficient communication infrastructure for small cells, both ends of wireless transmission and reception of an Ethernet-based wireless video recording system are connected using an L2 switch. The small cell connected to the receiving side L2 switch shares the wireless network section of the wireless video recording system and connects to the transmitting side L2 switch. After that, when it is normally linked to FMS, a management system for small cells, through the Internet network, the output of small cells is checked. In order to verify the results, a proposed network is formed on the elevator inside the building with a poor radio wave environment, and the radio wave environment is measured before and after the small cell application in the section where the elevator operates. As a result, the main parameters of the radio wave environment in all sections of the elevator are improved, as well as a constant receiving electric field strength within the moving elevator.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.74-82
• /
• 2007

IPv6 is the internet protocol for next generation which can solve the problem of IPv4 protocol. Mobile IPv6 efficiently provides the mobility for mobile devices holding the properties of IPv6. iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard Ethernet switch and router for this kind of access, it can not only be applized to Ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the IPv6 iSCSI initiator driver which was originally designed for wired networks. Also, this paper describes about the implementation and performance analysis of mobile education service system using virtual storage devices in IPv6 wireless networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.517-525
• /
• 2005

iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard ethernet switch and router for this kind of access, it can not only be applied to ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, focusing on this applicability, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the iSCSI initiator driver, which was originally designed for wired networks. Additionally, its potential with a wireless network is also evaluated.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1941-1948
• /
• 2000

Multistage interconnection networks (MINs) have been recognized as an efficient interconnection network for high-performance computer systems and also have been recently identified to be effective for a switching fabric of new communication structures - gigabit ethernet switch, terabit router, and ATM (asynchronous transfer mode). While lots of models analyzing the performance of MINs have been proposed, they are either inaccurate or, even if accurate, very complex for the analysis. In this paper, we propose an extremely simple mode for evaluating the multibuffered MIN with small clock cycles based on the approximation approach. Comprehensive computer simulation shows that the proposed model is very accurate in terms of the throughput and mean delay. Furthermore, it significantly reduces the computing overhead due to its simplicity.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.97-105
• /
• 2020

Recently, as the data speed and operating frequencies of Ethernet keeps increasing, electro magnetic interference (EMI) also becomes increasing. The generation of such EMI will cause malfunction of near electronic devices. In this study, EMI filters were applied to reduce the EMI generated by DC-DC SMPS (switching mode power supply), which is the main cause of EMI generation of Ethernet switch. As the EMI filter, MLCCs with excellent withstanding voltage characteristics were used, which had advantages in miniaturization and mass production. Two types of EMI MLCC filters were used, which are X-capacitor and X, Y-capacitor. X-capacitor was composed of 2 MLCCs with 10 nF and 100 nF capacity and 1 Mylar capacitor. Y-capacitor was consisted of 6 MLCCs with a capacity of 27 nF. When only X-capacitor was applied as EMI filter, the conductive EMI field strength exceeded the allowable limit in frequency range of 150 kHz ~ 30 MHz. The radiative EMI also showed high EMI strength and very small allowable margin at the specific frequencies. When the X and Y-capacitors were applied, the conductive EMI was greatly reduced, and the radiation EMI was also found to have sufficient margin. In addition, X, Y-capacitors showed very high insulation resistance and withstanding resistance performances. In conclusion, EMI X, Y-capacitors using MLCCs reduced the EMI noise effectively and showed excellent electrical reliability.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.1-4
• /
• 2010

RS-485, communication bases from small network system must prepare in collision. The collision is that mean the data transfer breaks. For a stabilized communication chooses 1:N polling methods. But polling is low speed in addition to maybe overload Master device. So, usual N:N Prefers a communication. In this case, must be preparing to avoid collision or some solutions. Generally, to after collision retransmits after short time. It's called delay time for short time. When making a delay time, uses address of each systems. (Address of each node) If the many nodes collided, the each node has different delay time. When making a delay time, uses a usual random number. Making a random number is hard job. So uses a usual pseudorandom number. It is more difficult from small size MCU. The Chaos random number provides stabled value. Finally, when uses the Chaos random number, the stability and reliability of system get better.