• 한국지반환경공학회 논문집
• /
• 제24권8호
• /
• pp.5-11
• /
• 2023

최근 이상기후로 인한 집중호우가 빈번히 발생함에 따라 비탈면의 표층 유실 및 간극수압의 증가로 인한 비탈면의 붕괴가 자주 발생하고 있다. 비탈면의 붕괴를 방지하기 위해서 활동저항력을 증가시키거나 간극수압을 감소시키는 등의 다양한 공법들이 적용되고 있으며, 활동저항력과 간극수압의 조건을 동시에 만족시킬 수 있는 공법이 적용되면 비탈면 붕괴에 효율적으로 대응할 수 있기 때문에 이에 관한 연구가 꾸준히 수행되고 있는 추세이다. 따라서 본 연구에서는 기존 수평으로 적용되는 배수재의 매설 경사를 상향 방향으로 매설하여, 비탈면의 보강 및 배수 기능을 모두 만족시킬 수 있는 상향식 비탈면 보강 공법을 제안하였다. 또한, 제안한 공법의 보강 및 배수효과가 가장 우수한 매설각도를 확인하기 위해 대표 단면에 수평 배수재를 0°~60°로 10° 단위로 설정한 조건에서 공법의 보강 및 배수 효과를 확인하였으며, 배수효과가 가장 뛰어난 40°와 안전율이 가장 우수한 20°의 조건으로 실내 모형실험을 수행하여 수치해석 결과를 검증하였다. 그 결과, 수치해석 결과와 마찬가지로 40°에서 상대적으로 배수효과가 높게 나타났으며, 20°의 경우 원활한 배수가 이루어지지 않아 비탈면이 붕괴되는 현상을 관찰할 수 있었다. 또한, 상향식 비탈면 보강재의 보강 및 배수효과를 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.736-744
• /
• 2009

The abrupt failure of slope caused by a concentrated rainfall would be a disaster in this country. Specially, the soil slope may be collapsed by the rainfall seepage, however, there is not much information for the mechanism of slope failure during rainfall. As analyzing the stability of slope by rainfall, the conventional method is to put the ground-water level on the surface of slope. However, it may provide the over-reinforcement for the slope stability. Futhermore, although over-reinforcement for the slope was fulfilled, the possibility of potential slope failure still exists. In this study, the slope stability by the conventional design method and the causes of unstable slope during rainfall were investigated. To analyze the slope stability by rainfall, the computer program SEEP/W for the analysis of seepage was used. As changing the intensity and duration of rainfall in SEEP/W, the analysis were performed. After completion of analysis, the porewater pressure data from SEEP/W was applied to SLOPE/W. As a results of this analysis, it is not reasonable that the groundwater level is going up to the surface of slope during rainfall. Therefore, the conventional reinforcement for the slope stability is not obvious to satisfy the criterion safety factor during rainfall. The reasonable counterplan is to install drainage hole on the surface of slope in order to prevent erosion and debris flow.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.45-52
• /
• 2003

Construction and extension of road by industrialization are increasing. According to this, construction of large cutting slope is increasing. Therefore, many methods for slope stability by this are applied. Failure happens according to dip and dip direction of slope. It is actuality that is connoting unstable element. This slope include coaly shale. Stability of slope failure this study takes place by road extension running examination for stability property calculate. Use this and examined stability about stereographic projection and wedge failure. Apply suitable reinforcement countermeasure about unstable cutting slope and analyzed stability. Wish to consider effective and robust processing plan of great principle earth and sand side securing stability. Hereafter with these data, is going to utilize in reinforcement and failure prevention.

• 지질공학
• /
• 제16권2호
• /
• pp.189-199
• /
• 2006

본 논문은 도로공사시 발생된 붕괴사면을 대상으로 사면안정성을 검토하고, 불안정할 경우 합리적인 사면보강공법을 제안한 현장사례 연구이다. 사면조사결과 대상사면은 5개의 대규모 인장균열을 포함하고 있으며, 사면활동은 인장균열에서 시작하여 표토층과 풍화암층사이까지 발생된 것으로 판단된다. 사면안정해석은 건기시와 우기시에 대하여 각각 수행되었으며, 대상사면은 현재 불안정한 것으로 예측되었다. 사면보강공법은 사면의 파괴규모에 따라 선정하는 것이 바람직하다. 즉, 파괴규모에 따라 소규모파괴, 중규모파괴, 그리고 대규모파괴로 나누고 각각의 파괴규모에 따라 사면보강공법을 결정할 수 있다. 대상사면의 경우 대규모파괴에 해당하므로 사면보강공법은 안전율증가공으로 억지말뚝공을 채택하고, 안전을 유지공으로 식생공(Seed Spray) 및 지표수배제공을 채택할 수 있다. 억지말뚝으로 보강된 사면의 안정해석을 위하여 SLOPILE(Ver 3.0)프로그램을 적용하였다. 사면안정 해석결과 1열의 억지말뚝을 시공할 경우 안정한 것으로 나타났으며, 해석결과로부터 억지말뚝의 사면안정효과를 확인할 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1279-1285
• /
• 2010

Our country has a tendency to build many structures by cutting mountainous areas due to geographical features. Among these construction done in our country, road construction take the first spot in rank. As the construction is done, fractured inclining plane is created inevitability because of the natural properties of mountainous areas. The stability of the fractured inclining planes and slope formed in the opening, which are developed at the time of construction, need to be evaluated. Also, reinforcement plans for these matters are necessary. This paper is to go through an examination on the fractured inclining surface that is developed at the time of construction, especially the composite inclining plane that consists of soil and rocks. Furthermore, evaluating the stability by performing an analysis on stereographic projection and limit equilibrium, based on the examination results. using the stability evaluations, applications were explored for reinforcement methods of construction that fits the geological characters of this inclining surface.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.930-937
• /
• 2008

From the result of precise field investigation and stability analysis for the cut slope, following results were acquired. 1. The cause of the collapse of cut slope came from circle sliding collapse by fault zone which remained inner weathering zone. 2. The existing destructed soil and rock can be removed by reinforcement. And to prevent the additional destruction, it is judged that applying the method after relaxing the slope would be reasonable. 3. To make cut slope stable, soft rock layer should be done cutting 1:1.5 and 1:2.0 ~ 1:2.5 for weathered rock and soil layer. 4. Heavy water leakage section should be applied horizontal drain method so that water pressure should not act to the cut slope.

• 지질공학
• /
• 제18권4호
• /
• pp.405-414
• /
• 2008

기존의 사면안정성 평가는 전체 사면을 균질하다고 가정하고 사면 내에서 가장 위험한 부분의 안정성으로 전체 사면의 안정성을 평가한다. 그러나 하나의 사면 내에서도 위치에 따라 암반/토사의 특성과 상태가 각각 다르기 때문에 기존 평가방법으로 분석한 사면의 안정성이 전체 사면의 안정성을 대표한다고 할 수 없을 뿐만 아니라 사면의 보강에 있어서도 과도한 보강을 초래할 수 있다. 본 연구에서는 이 같은 문제를 해결하고자 하나의 사면을 격자형의 셀로 분할하여 각각의 셀의 특성을 조사하고 안정성을 평가하는 셀 단위 평가법을 제안하였다. 셀 단위 평 가법에서는 사면을 구성 물질에 따라 토사사면과 암반사면으로 구분하며, 각각의 셀에 대해 강도, 체적절리계수(Jv), 절리간격, 지하수상태, 절리상태 등을 조사하고 이를 SMR 및 상태지수를 통해 안정성을 평가한 후 셀 별 조사 자료와 안정성 분석결과를 종합하여 작성된 등고선도를 통해 사면의 위치별 안정성을 평가하게 된다. 본 연구에서는 총 3개의 사면에 대해 셀 단위 평가법을 적용한 결과 대부분의 셀에서 계산된 SMR 값은 기존의 평가법에서 구한 사면 전체의 SMR 값보다 높았다. 이는 셀 단위 평가법이 기존의 평가법 보다 사면을 보다 정확하게 평가할 수 있음을 의미하며, 기존의 사면 평가법이 가진 과도한 보강과 관련된 문제를 해결 할 수 있을 것이라 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1344-1350
• /
• 2008

The slope surface at a linking road construction from a geological stratum situation and a spot investigation weathering about the base rock. We became formation the slope to very disadvantageous base rock. A stability review result confirmed report of the slope were difficult and presented the stability countermeasure. We executed the slope to the purpose to augment safely.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.113-119
• /
• 2014

To examine the soil reinforcement by the shrub with shallow root systems for slope stability, we developed insitu apparatus for direct shear test and conducted the insitu field tests for Lespedeza cyrtobotrya, a representative revegetation species for artificial hillslopes. The insitu field tests were conducted for two different soil conditions (the rooted soils and non-rooted soils) and we then compared the experimental values with those calculated from the Wu model. The results showed that the soil reinforcement derived from the insitu field tests ranged from 0.01525 to 0.1438 $kgf/cm^2$ while the one calculated from the Wu model ranged from 0.1952 to 0.2696 $kgf/cm^2$. Our finding suggests more field tests are needed to collect the related parameters in the model application thereby predicting the reliable soil reinforcement by the shrub root systems.

• 한국조경학회지
• /
• 제27권5호
• /
• pp.80-93
• /
• 2000

This study measured the shearing resistance of the roots of the Pinus Koraiensis by the tensile strength gained through their individual tensile test for the Root Reinforcement Model. On the basis of the shearing resistance value calculated through such a process the factor of safety(Fs) was comparatively presented by using the simplified Janbu Method in PCSTABL5M, the slop-analyzing software which had been developed in Purdue University of the U.S.A according to the shape of a slope and the type of soil. The results to have measured a stress and the factor of safety(Fs) by experiment are as follows. 1) The mean root diameter of the Pinus Koraiensis used for this experiment was 2.483mm and the mean tensile stress was calculated as 422.846(kgf/$\textrm{cm}^2$). In the strain ratio of material and the elastic modulus was measured 7.8%, 9,291.92(kgf/$\textrm{cm}^2$). 2) The shearing strength including the resistance of soil and root is expressed as Rt=C+Cr+$\sigma$.tan . ΔCr(kg/$\textrm{cm}^2$) of the shearing resistance calculated by estimating the areal ratio of roots at 10 is 0.253(kgf/$\textrm{cm}^2$). 3) As the result of making an analysis of the natural slope stability by the soil parameter, the factor of safety(Fs) was calculated at 1.795 in CL, and the stability analysis of the root reinforcement slope, Fs was calculated at 1.952. However, since a precise analysis of the controlled factors of the slope analyses are demanded for more accurate dynamic analyses, the future demands a study on this.