• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.38.4-38
• /
• 2001

In this paper, a novel model following sliding mode control is proposed by using a novel sliding mode with virtual state. This sliding surface has nominal dynamics of an original system and makes it possible that the Sliding Mode Control(SMC) technique is combined with the optimal controller. Its design is based on the argument system whose dynamics have one higher order than that of the original system. The reaching phase is eliminated by using an initial virtual state that makes the initial sliding function equal to zero.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.348-348
• /
• 2000

In this paper, we present a fuzzy moving sliding mode control for two-degrree-of-freedom robotic manipulator. 17he sliding surface parameters are designed by fuzzy inference. The proposed sliding mode control makes the error always remain on the surface from beginning and therefore, the system is insensitive to system uncertaintics and external disturbances. Simulation results show the effectiveness of proposed scheme.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.744-746
• /
• 1998

In this paper, a new sliding mode observer is proposed by introducing a new sliding surface. The new sliding surface is defined based on the augmented error system with virtual error state. The new sliding mode observer have more degree of freedom than the existing VSS observer. It can have dynamics on the sliding surface.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.51-54
• /
• 2000

In variable structure control algorithm, sliding mode makes the closed loop system insensitive to modelling uncertainties and external disturbances. However due to imperfections in switching, the system trajectory chatters, which is very undesirable. And the insensitivity property of a sliding mode controller is present only when the system is in the sliding mode. To overcome these shortcomings, in this paper, new sliding mode control algorithm using time-varying sliding surface and fuzzy PI structrue is proposed.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.359-361
• /
• 1993

In this paper, a variable structure controller with time-varying sliding surface is proposed for robot manipulators. The proposed time-varying sliding surface ensures the existence of sliding mode from an initial state, while the contentional sliding surface cannot achieve the robust performance against parameter variations and disturbances before the sliding mode occurs. Therefore, error transient can be fully prescribed in advance for all time. Furthermore, it is shown that the overall system is globally exponetially stable. The efficiency of the proposed method for the trajectory tracking has been demonstrated by simulations.

• Journal of information and communication convergence engineering
• /
• v.2 no.3
• /
• pp.198-201
• /
• 2004

In this paper, the discrete optimal control is made to have the robust property of Sliding mode controller. A augmented system with a virtual state is constructed for this objective and noble sliding surface is constructed based on this system. The sliding surface is the same as the optimal control trajectory in the original system. The states follow the optimal trajectory even if there exist uncertainties. The reaching phase problem of sliding mode control is disappear in this method.

• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.357-364
• /
• 2000

In this study, the sliding wear in spur gears, using Archard's wear model, is analyzed. Formulas of tooth sliding wear depth along the line of action are derived. The tooth profile is modified Id make a smooth transmission of the normal loads and the cylinder profile for reducing the pressure spike is suggested. The sliding wear rate is calculated with these profiling results. We expect these modification methods to contribute to the reduction of sliding wear not only in the root, but the tip of tooth and tooth edge.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.323-326
• /
• 2006

Rotational inverted pendulum is a typical under-actuated system. For its highly nonlinear characteristic, a sliding mode controller is chosen for its robustness against the system uncertainties. Tow fuzzy inference mechanisms are applied in this paper to reduce the chattering phenomenon. One is proposed to construct a time-varying sliding surface. Another one is used to obtain the minimum upper bound of the uncertainties. A comparison between the conventional sliding mode and the fuzzy sliding mode is shown by simulations.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.1
• /
• pp.39-46
• /
• 1991

In the VSS control, the trajectories with a conventional sliding surface have a reaching phase which is an interval from the initial state to the first touching of the sliding surface. Since the sliding mode control can not be realized in a reaching phase, the trajectories may be sensitive to the disturbances and parameter variations. A simple nonlinear sliding surface is proposed to improve the robustness in a reaching phase. The position control of a PM DC servo motor using a new sliding surface is carried out and is compared to the one using the conventional surface. The sliding mode occurs in entire trajectories with the proposed new sliding surface and the improved robustness is obtained.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.457-464
• /
• 2000

Stereographic method is a general and basic method to analyse sliding failure potential of rock slope. Region of failure analysis using stereographic method extend to curved slope from straight slope in this paper, Curved slope is defined as the multi-face slope with free surface more than two face and has different characteristics from straight single face slope. Individual daylight envelopes of free surfaces are combined into total daylight envelope of multi-face slope. So, sliding envelope of multi-face slope is the daylight envelope except friction cone. Specially, If only single joint set is developed in the slope, single plane sliding(or plane failure) is impossible in the single-face straight slope, but possible in the multi-face slope. In the multi-face slope with only one joint set, single plane sliding occurs when orientation of sliding plane is between two side slope orientation in the sliding envelope.