• Title/Summary/Keyword: Skeletal Structure

Search Result 191, Processing Time 0.024 seconds

A MICROSCOPIC STUDY OF THE EFFECTS OF EXPERIMENTAL RICKETS ON THE DENTAL STRUCTURE OF RATS (실험적구루병에서 백서 치아조직 변화에 관한 현미경학적 연구)

  • Choi, Don-Ok;Lee, Jong-Gap
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.7 no.1
    • /
    • pp.75-83
    • /
    • 1980
  • Rickets is not the deposite of minerals in the skeletal tissue and the retardation of skeletal growth in growing in growing animals. This study was undertaken to investigate the histologic effects of experimental rickets on the dental structure of the albino rats, and to show the relationship between the histological effects and the pulpal disease which induced premature loss of the primary teeth. This study was based on material obtained from 40 white rats that were placed on a rachitogenic diet for a period 1 to 56 days after weaning (at 24 days). In addition, a study was made of 25 litter mates, 24 to 80 days, that were fed a normal diet. The following results were obtained: 1. Enamel formation and calcification showed no significant changes and no hypoplasia. 2. Dentin formation and calcification was retarded and disturbed. In the experimental group, predentin/calcified dentin was remarkablly increased. 3. Newly formed dentin showed interglobular texture (less homogenous calcification) and the predentin was significantly wider and thicker, and there was an irregular wave in the basal portion of the rat's incisors. 4. In cementum, Matrix formed at almost a normal rate but calcification was defective. So cementoid tissue was increasesd. 5. The formation of the alveolar bone was at almost a normal rate but calcification was retarded. The trabecular bone was filled with osteoid tissue and thicker than in normal groups.

  • PDF

Consequence-based robustness assessment of a steel truss bridge

  • Olmati, Pierluigi;Gkoumas, Konstantinos;Brando, Francesca;Cao, Liling
    • Steel and Composite Structures
    • /
    • v.14 no.4
    • /
    • pp.379-395
    • /
    • 2013
  • Aim of this paper is to apply to a steel truss bridge a methodology that takes into account the consequences of extreme loads on structures, focusing on the influence that the loss of primary elements has on the structural load bearing capacity. In this context, the topic of structural robustness, intended as the capacity of a structure to withstand damages without suffering disproportionate response to the triggering causes while maintaining an assigned level of performance, becomes relevant. In the first part of this study, a brief literature review of the topics of structural robustness, collapse resistance and progressive collapse takes place, focusing on steel structures. In the second part, a procedure for the evaluation of the structural response and robustness of skeletal structures under impact loads is presented and tested in simple structures. Following that, an application focuses on a case study bridge, the extensively studied I-35W Minneapolis steel truss bridge. The bridge, which had a structural design particularly sensitive to extreme loads, recently collapsed for a series of other reasons, in part still under investigation. The applied method aims, in addition to the robustness assessment, at increasing the collapse resistance of the structure by testing alternative designs.

Human Skeletal X-ray Projection Images Applied Fashion Design (인체 골격의 X-ray 투사 이미지를 활용한 패션디자인)

  • Park, Jungin;Lee, Younhee
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.17 no.3
    • /
    • pp.13-27
    • /
    • 2015
  • The purpose of this study is to understand the general process from textile design till fashion design and to understand the relation between the body structure by using the x-ray technique. The research method was to see background of the anatomic feature and human skeletal X-ray projection through historical aspect of publications, the Internet, and paper. In terms of production, in order to present a design that takes into account the unique silhouette of the human body without distorting the shape of the human skeleton, X-ray images that were reconstituted using a computer graphic tool (Photoshop CS) were reproduced into the fabric as intense images through the digital Textile Printing technique that is capable of expressing fine and delicate details, and applied into the design. An original design was developed that emphasized the impression of the human body being projected and the shape of the human skeleton realistically expressed in terms of silhouette and detail. The results are as follows: First, Body has a anatomic formative characteristic and its formativeness becomes as a great motive for the artistic expression and thereby it becomes more unique and available for new design expression. Second, Using the 'body frame' as the motive of the research, there's mainly tried to make an unique expression. Third, according to reconstructing human skeletal X-ray projection by using Adobe Photoshop CS2, it can be expressed strong and unique design. Forth, DTP which is being used as an essential technique, expresses the body frame realistically and being used the special type of functional product and silk. Likewise by discovering the diverse formativeness of our body frame and reflecting the sense of humanity into the pieces there's been able to make and develop an unique fashion design. I sincerely hope there is a hug progress in this research in this area.

  • PDF

A ROENTGENOCEPHALOMETRIC STUDY OF CRANIOFACIAL CHARACTERISTICS OF THE SKELETAL CLASS III MALOCCLUSIONS CLASSIFIED BY MANDIBULAR PLANE (SN-MP) ANGLE (수직적 분류에 의한 골격성 III급 부정교합자의 측모 특성에 관한 연구)

  • Lee, Hyun-Kyung;Chung, Kyu-Rhim;Park, Young-Guk
    • The korean journal of orthodontics
    • /
    • v.22 no.1
    • /
    • pp.205-227
    • /
    • 1992
  • This study was aimed to investigate the characteristics & the causative areas of the adult skeletal class III malocclusions with different facial divergency. The lateral cephalograms of 80 subjects with skeletal class III malocclusion from 17 to 29 years of age were classified into 3 groups according to SN-MP angle; hypodivergent group $(21.65{\pm}3.52^{\circ})$, neutrodivergent group $(30.50{\pm}2.29^{\circ})$ and hyperdivergent group $(40.02{\pm}3.98^{\circ})$. The data were gathered by digitizing of the traced cephalograms and were statistically analyzed. The results were as follows: 1. The anterior cranial base of the hyperdivergent group was shortest & tipped upwardly to the FH plane. 2. The maxilla of hyperdivergent group was shortest anteroposteriorly and positioned posteriorly to the anterior cranial base. 3. The degree of the mandibular prognathism in hyperdivergent group was less than the hypodivergent group. The hyperdivergent group showed the downward & backward rotated mandible. 4. The mandibular ramus & body was short & slender in the hyperdivergent group and the gonial angle was greatest in the hyperdivergent group. 5. The temporomandibular joint was positioned more superiorly to the anterior cranial base in the hyperdivergent group. 6. The cranial base, palatal plane, occlusal plane and mandibular plane were diverged in the hyperdivergent group. And this group had a great anterior total facial height, especially anterior lower facial height. 7. The craniofacial characteristics of skeletal class III malocclusion were critical in the vertical structure than the horizontal.

  • PDF

Non-surgical treatment and retention of open bite in adult patients with orthodontic mini-implants (성인 환자에서 구치부 압하를 통한 개방교합의 치료와 유지)

  • Moon, Cheol-Hyun;Lee, Joo-Sin;Lee, Hyun-Sun;Choi, Jin-Hugh
    • The korean journal of orthodontics
    • /
    • v.39 no.6
    • /
    • pp.402-419
    • /
    • 2009
  • Successful treatment of the non-growing patient with an open bite of either dental skeletal pattern often presents a difficult challenge. The morphologic pattern in anterior open bite is characterized by longer vertical dimensions, an increase in development of the maxillary posterior dento-alveolar structure and a steep mandibular plane. In such cases, molar intrusion would be a good remedy for treatment. This article reports the successful treatment and retention of two anterior open-bite cases. We used orthodontic mini-implants for treatment and a circumferential retainer with posterior bite block or skeletal fixed retainer for retention. The diagnostic criteria and mechanics for appropriate treatment are discussed. Our results suggest that open bite can be reduced successfully with intrusion of molars using orthodontic mini-implants (OMI) without orthognathic surgery, and that circumferential retainer with posterior bite block and skeletal fixed retainer are effective for retention.

Analysis of effects from usage of skeletal anchorage-assisted Pendulum appliance on vertical component of craniofacial structure (골격고정원을 이용한 Pendulum 장치가 두개 안면의 수직적 요소에 미치는 효과 분석)

  • Lee, Jin-Woo
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.34 no.1
    • /
    • pp.10-16
    • /
    • 2018
  • Purpose: The purpose of this study was to evaluate distalizing effects from the Pendulum appliance on vertical component of craniofacial structures. Materials and Methods: 20 Patients who visited for orthodontic treatments are assigned to two groups. Group I, SN-MP > 37 degrees are showing hyperdivergent pattern. Group II, 29 < SN-MP < 37 degrees are showing mesocephalic pattern. Each group are consisted of 10 people. Results and Conclusions: Differences between skeletal classifications result in significant differences at labioversion of lower incisors and distalized amount, which is larger at Group I (P <.05). Group II has only shown significant distalized molars (P < .05). Labioversion of lower incisors has not shown significant change. Skeletal anchorage-assisted Pendulum appliance doesn't deteriorate vertical component nor significantly improve.

Ten new species of genus Sarcotragus (Demospongiae: Dictyoceratida: Irciniidae) from Korea

  • Sim, Chung Ja;Lee, Kyung Jin;Kim, Hyung June
    • Journal of Species Research
    • /
    • v.5 no.3
    • /
    • pp.443-458
    • /
    • 2016
  • Ten new species of genus Sarcotragus (Demospongiae: Dictyoceratida: Irciniidae) are described from Geomundo Island and Jejudo Island, Korea. All new species of the Sarcotragus are distinguished from the other reported species of Sarcotragus by the skeletal structure, especially fasciculate primary fibres. The characters of genus Sarcotragus have cylindrical primary fascicles filled with wads of filaments or flattened fascicles. All of the primary fibres are not cored with foreign debris. Secondary fibres have slightly fasciculate branch or plastic-like web. They are all not cored with foreign debris. All skeletal fibres are very irregular. The surface is covered with loose or tight filamentous membrane.

Nine new species of genus Ircinia (Demospongiae: Dictyoceratida: Irciniidae) from Korea

  • Sim, Chung Ja;Lee, Kyung Jin;Kim, Hyung June
    • Journal of Species Research
    • /
    • v.5 no.3
    • /
    • pp.483-497
    • /
    • 2016
  • Nine new species of genus Ircinia (Demospongiae: Dictyoceratida: Irciniidae) from Jejudo Island, Korea are described. All of the new species are distinguished from the others reported species of Ircinia by the skeletal structure, especially massive fasciculate primary fibres. The characters of genus Ircinia have primary fibres cored with foreign debris and no cored secondary fibres. Primary fibres are not easy to distinguish from secondary fibres if they are not cored. Secondary web has perforated plate or meshed net. All new species have loosely arranged skeletal fibres network.

Six New Agelas Species (Demospongiae: Agelasida: Agelasidae) from Kosrae Island, The Federated States of Micronesia

  • Sim, Chung Ja;Kim, Young A
    • Animal Systematics, Evolution and Diversity
    • /
    • v.30 no.3
    • /
    • pp.196-205
    • /
    • 2014
  • This paper describes six new species of sponges in the genus Agelas from Kosrae Island, The Federated States of Micronesia. Most Agelasid sponges are known from only tropical regions. All the new Agelas species; A. fragum n. sp., A. kosrae n. sp., A. purpurea n. sp., A. bakusi n. sp., A. vansoesti n. sp. and A. incrustans n. sp. are compared with other valid species that were studied. Six new species differ from the other species by morphology, growth form, skeletal fibres, habitats and spicule size. Agelas fragum n. sp. is characterized by its tuberculate surface and primary fibres with brush-like spicules. Agelas kosrae n. sp. is differs in skeletal structure and have tertiary fibres. Agelas purpurea n. sp. is characterized by primary, secondary and tertiary fibres are all cored with spicules. Agelas bakusi n. sp. is similar to Agelas clathrodes in shape, but differs in the primary fibres. Agelas vansoesti n. sp. is characterized by having acanthostrongyles. Agelas incrustans n. sp. is distinguished by its encrusting and not cavernous interior.

Effects of Recombinant Imperatoxin A $(IpTx_a$ mutants on $Ca^{2+}$ Release Channel/Ryanodine Receptor in Rabbit Skeletal Sarcoplasmic Reticulum

  • Seo, In-Ra;Park, Murim;Kim, Do-Han
    • Proceedings of the Korean Biophysical Society Conference
    • /
    • 1999.06a
    • /
    • pp.55-55
    • /
    • 1999
  • Imperatoxin A (IpTx$_{a}$), a 3.7 kDa peptide from the African scorpion Pandinus imperator, has been known as an agonist of skeletal ryanodine receptor (RyR). In order to study the structure and function of the toxins on RyR, the IpTx$_{a}$ cDNA was PCR-amplified using 3 pairs of primers and the toxin was expressed in E. coli expression system.(omitted)ted)

  • PDF